I am trying to resurrect my son's stock Gateway CX2618 Convertible Notebook. url... [code] Other than trying the rest of the files in AHCI_Intel_6.2.0.2002_Vistax86x64, I have no idea what to do. Is there a way to find and install the proper driver so that Win7 sees the HDD?
View 7 Repliesi bought Windows 7 some time ago but I havent got it working and one of my friends said that this is the best place for help. Thats what usually happens: I put in Windows 7 dvd and make a restart to boot it. When my computer sais press any key to boot i press enter and everything goes like it should. It loads files and then comes that screen: I can move the mouse but nothing happens. I'm not sure for how long i have to wait but i waited about 10 min and nothing happens and then i pressed the restart key. Then my computer dosent go past Verifying DMI pool data and i have to close my computer and then XP runs again. I tryed all this again but the result was the same and then i thought i install Windows 7 from my deskop. I used autorun, pressed install and everything went very smoothly. It installed everything withhout any problems until it had to do a restart after installing. After restart im back to that blue screen what i showed above only that a small line was moving at the bottom. Nothing happens and because it dosent move i restart my computer then it dosent go past Verifying DMI pool data until i shut my computed down and then i get a message that installed failed and xp will be restored. Im seriously out of ideas and Microsoft isnt interested of helping me to. They said contact my motherboard maker what i did and they said Windows 7 works and ask Microsoft
View 7 Replies View Relatedmy hp laptop doesn't want to install window 7
View 2 Replies View RelatedI am trying to overwrite Win7 32-bit with Win7 64-bit. When I run Win7 install it does not find my two HDDs (they are RAID-1). When I look in my Device Manager (before starting the install process) under "Disk Drives" it only shows "GRAID SCSI disk device" and some other drives that are not hard drives. It does not show two HDDs. The BIOS shows both drives and shows a GRAID-1 configuration. I am not sure what to do next to get Win7 to either find the HDDs to write the new Win7 to or do something with the "GRAID SCSI disk device." I bought this machine like this and am not familiar with how to set these things up: I am not an expert.
View 7 Replies View RelatedI had installed windows 7 32 bit and it had compatibility issue with my Thomson Speedtouch since it doesnt have windows 7 driver I found a tweaked one online and was using it and it worked fine. Suddenly it stopped working and I formatted and reinstalled windows 7 but I was not able to connect the net. The message is always no valid IP configuration. I tried even with a router but the message is the same. So I installed XP on the other partition and I have no problem connecting to the net. Now I want to format the other partition and reinstall windows 7 but I am not able to format the partition from XP or with the installation CD for windows 7.With XP the format fails and with the installation DVD it always goes into BSD.What to do? On startup the previous installation of windows 7 doesnt even show up and goes directly into XP?!
View 5 Replies View RelatedI'm having a problem with Windows Update. It's managed to install a few updates, bust most of the updates that it automatically finds fail to install (many important ones too - security updates, etc.). A bit frustrating. For the past couple of days, it tries to install the same two updates every time I turn off the computer. The process takes about 40 minutes. Then it shuts off without an error message. Afterwards, when I turn the computer on again, it doesn't say anything but there are once more two updates that need to be installed - the same ones. It's been quite frustrating. For now, I've got the updates turned off, so it won't try to install them any more, but that's only a workaround and no solution.
I think the problem might be connected with some other installations problems. I've tried to download the updates and install them manually, but it didn't work either; first it said that my virus scanner was interfering (I disconnected from the Internet, deactivated the virus scanner, and tried it again, which got a little bit further but not all the way). At the end I got a kind of dubious error message, which I sadly haven't written down, but it was similar to the ones that I got when I tried to install Microsoft Office and also was unable to get the installation to run through to the end. In both instances, the installation was almost done, after which I got a message that there was a problem with some assembly components, and then it undid the changes. This normally took more than an hour - 30 minutes for the installation to get to the point where it started over, an hour to get it to cancel itself. Haven't found a solution there, and that sucks, because I really need it. I've got a lot of files saved in OneNote format that I can't use and need for work.
The Office error messages led me to a couple of forums where it had worked out because people had updated their .NET framework. I can't do that because .NET is part of the OS framework in Windows 7, apparently. Then I read that some other people had just used Windows Update to update their OS, and then it worked. That's what led me to the discovery that my updates weren't working. I believe that that's got something to do with the problem.I've installed some software, but there's the problem with Windows - I can't install it at all. Not sure what to do here. Windows Update lets me look at the update history. I've found that I get the error code 643 for the two updates that have repeated over the past two days again and again. For the other ones it's a little different; they tried to install once and didn't work. For those, I get following code: 80080005.
I have a problem with my custom build pc,When i try installing windows 7 pro 64 bit, It freeze in "windows is loading files", I've waited 20mins and nothing happens.Before this problem happen I bought a Barebone kit and not a problem like this happen but I recently had hardware issues with my motherboard and psu were not stable, I had to replace both my mobo and psu.here's my original build I started with - no problem what's so ever[CODE]
View 1 Replies View RelatedI'm really stuck. When I go to install windows 7 the install gets to install now and when I click it the next screen shows no hard drive,
View 8 Replies View RelatedI never thought ill be having a problem with installing windows. My old motherboard has died on me and i have replaced it with a new M3A79-T deluxe without changing my already installed windows 7 64. Everything worked fine if a little slow so I decided to frag everything and do a clean install but the installation kept freezing at expanding files. Following other forums i tried dban but it finished in about 2 seconds with errors. which made me think there is a problem with the hd. So then i installed Linux mint so i can use at least something in the mean time, it worked without a problem ruling out a faulty hard drive, I went back to trying to install win7. This time i wasn't even able to proceed from the partition menu as it kept complaining that windows cannot install onto this partition due to 0x80300001 error. I noticed that no partition was marked as the primary partition.I got around this by creating new partitions in the Linux installer then exiting and reformatting the partitions in windows installer (assuming this turns it into NTFS format) I was able to proceed into the installation but again got stuck at the same place with expanding files with error 0x8007045d after a few hours just like before.
Also i never installed drivers in windows installation but when i try to install sata drivers either from mobo cd or mobo website the installer doesn't recognize them, iv tried taking everything out but 1 ram stick, installing new BIOS, reseting CMOS, playing around with partitions, installing from different dvds I'm getting close to throwing this thing out of the window and getting a mac book.
I have the following workstation configuration :
PROCESSOR - Dual (two processors) - Xeon E5520 8M Cache, 2.26 GHz, 5.86 GT/s Intel� QPI
MOTHERBOARD - Intel Workstation board S5520 SC
GRAPHICS CARD - Palit Nvidia GeForce GTX 275 (986 MB) Dual DVI out
RAM - DDR3 1333 MHz 6 GB (G-Skill)
MONITORS - 2 are connected (Samsung Sync Master 2233 & NEC Accusync LCD 224WXM)
CURRENT OPERATING SYSTEM - Windows XP 64 bit
The problem with the above configuration is that when I try to install Windows 7, the machine freezes (hangs) randomly, I have tried formatting and installing for at-least 4-5 times now but what happens is the setup doesn't work and stops during installation, last time the setup was successful but it hangs the workstation without any reason. I have also tried installing the same CD on other system and it works fine.
I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
Specs
500gb hdd
4gb ram
i5 quad core
I have a Compaq f500 that was running Vista home premium. I did a fresh install of Windows 7 ultimate. It went thru the install with no problems. When it got to the screen when you put in your name I discovered that the keyboard doesnt work. I tried plugging in an external keyboard and it doesn't work either. Also cant select safemode or anything that requires use of the keyboard to enter.
View 1 Replies View RelatedI have Windows 7 Professional x64 and autoplay is set to play using Windows Media Player but DVD's, and CD's spin but nothing comes up on the screen or audio.
View 5 Replies View RelatedSmallish yet irritating problem with my Win 7 Ultimate 64-bit install - Autoplay doesn't work, and hasn't since I was forced to reinstall a couple of weeks back.Doesn't work for discs inserted, USB flash drives, memory cards, external HDDs plugged in etc (Firewire & ExpressCard/34 not tested). I have of course gone to the Autoplay settings and restored defaults, also tried setting every category (DVD, CD, etc) at "Ask me every time". No luck. I was working fine on the same OS before before I had to reinstall fresh, also on x86 version of Win 7, and on Vista.Nothing wrong with the USB ports/disc drive, inserted media is still detected.
View 2 Replies View RelatedA problem arised with Windows Installer-package. A DLL-file that is needed to finish this installation couldn't be run. Contact supportstaff or your supplier of this package. That is what my computer says when I am trying to install Java. Why do I have to install a DLL-file? I haven't had to done that before when installing Java.Other programs has also told me to download a special DLL-file, but Java doesn't tell me which one, so I can't download it
View 6 Replies View RelatedI wanted to reinstall IE9, so I uninstalled it and now IE8 doesnt work, gives that error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.7601.17514
Application Timestamp: 4ce79912
[code]....
When im trying to intall IE9 again it doesnt complete the installation for some reason.I have Windows 7 Home Premium 64 bit?
I have a trouble with my friend PC. I installed him Windows 7, but I can't put Realtek High Definition driver. Tried all kind of drivers from the official site, but no result. On the Device manager there are jus High Definision driver, but not Realtek. In Program files there is a Realtek installed program, but nothing works. There is no Realtek Sound Manager too.
View 3 Replies View RelatedI'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.
Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?
[I reinstalled Windows 7 using the Upgrade option (not clean install) but before I could do the reinstall it said I had to uninstall Ati Technologies which I could then reinstall after the upgraded Windows]I ran install for the Catalyst Softward Suite for drivers which had the CCC listed, but there is no CCC option in the install list when I run to install. It just doesn't appear! I've uninstalled ATI Catalyst Install Manager, ran Driver Sweeper in safe mode and then reinstalled but still the CCC does not appear in the list. I've also checked the Windows/Assesmbly key problem too. It's the same problem as this post: Catalyst Control Center missing/Wont install?I have a Radeon 4000 series card.
View 4 Replies View RelatedI entered the CD and then it automatically booted, and then it went through the usual setup routine and the problem started when it reached the part where I'm supposed to choose where to install Windows.I formatted Local Disk "C" and then chose it to install there, it then said: This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.I then shut down the PC and then re-booted it, it read the CD and then went to "Windows is loading files" then skipped the installation and went for the normal "Starting Windows"... It's weird because I don't have a "C" so how come it says that without having windows? Anyway, it passes this screen and suddenly it just glows in multi colors until I have to shut it down myself. Trying again gave the same response (Which means I can't access the install screen. All what I have is the BIOS menu)There is no way I can return the CD at the moment, and I lost the previous Windows disk...
PC Specs:
Motherboard: Z68AP-D3
GPU: Powercolor 6850 1GB GDDR5
CPU: i5 2400 3.1 GHz
RAM: 8GB DDR 3 1600 MHz
Windows: ironically NONE
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
I am trying to restore my Toshiba A505 S6005 from the ISO image disks I created (Computer won't start in Normal or any SafeMode). I'm at the "Select the location of the sys image" and the computer doesn't show the DVD player. I tried downloading the dvd driver from Toshiba (WinDVD, I think) and put it on a thumb drive but it seems to be the wrong file type for getting my dvd working.
View 1 Replies View Relatedi got some problems with my computer(dell inspiron 1525). so about 6 mths ago i bought a new WD Blue Scorpio 1TB HDD and ran windows 7 with no issues, about a month ago the HDD failed and i had it replace through the warranty. now i have another new HDD trying to run the same exact version of 7 and nothing is working right. the internet is complete crap 90% of the time nothing loads i get this,"The server at camaroforums.com can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network."i also have issues with IE so i know its not chrome and nothing has changed as far as my router/ISP just a new HDD also im trying to install "playstation media server" any i keep getting an error that java runtime environment 7.0 wont install (i just installed this on my PC a couple days after my laptop died with no issues, and just to confirm that its my computer and not the program last night i installed it on my sisters laptop no problem)
View 3 Replies View RelatedI am trying to install Windows 7 Professional 64 bit on a Kingston HyperX 240Gb SSD. The motherboard is an ASSRock Extreme4 Gen3. I've set my SATA3 port in ACPI mode, but still, Windows 7 simply cannot find my SSD. When I press install it says "A required CD/DVD drive device driver is missing"... The BIOS sees the SSD. I am installing Windows 7 Professional 64 bit SP1 btw.
View 1 Replies View RelatedI recently built a computer (for the first time) and I tried installing Windows 7 64bit on it, but it doesn't see the hard drive. The hard drive shows up just fine in the BIOS so I tried installing Linux to see if that would see it..which it did. So why would Windows 7 not see the hard drive will everything else can?
View 2 Replies View RelatedWe have a Lenovo T61 laptop and have installed Windows 7 professional edition on it few months ago. From past week or so, the system tends to not go beyond a blank screen after turning the power button on. I've tried pressing F8 and also boot up using W7 disk, but nothing works. Its a blank screen, however, the system lights like power, bluetooth, keypad lights do turn on. I am posting the question from a different computer now.
View 1 Replies View Relatedokay spent 4 hours letting a guy from HP support have control of my computor and he couldn't find the problem which is no matter how many times i install my printer it says installation succesful my pc won't reconize it won't communicate withit it's like it's doesn't exist i've tried three different printers i'v gone all through the troubleshooting helps and rebooted and rebooted tried clean install everything
View 6 Replies View RelatedI have an issue with my computer and Window 7 that I was hoping you could provide insight on how to fix. Recently I have noticed that Windows 7 doesn't want to shut down. Heck, it doesn't even restart and Hibernate. When I go to Shut down the only option it provides is Log Off. You can shut down after the the computer Logs Off my account, but this wasn't the case before.
I also feel it might be important to note that the computer prevents me from entering the Task Manager and Ctrl- Alt- Del no longer does anything.Is this an issue with the OS or could this be something like a Virus.
can't include information beyond what I'm typing as can't get past Windows logo screen before OS goes into page that states "Windows can't start" and requests either Repair or log on normally. Can't do either. Tried Repair, states can't repair and identifies problem as Windows Defender Offline. This is the last program I ran prior to having problems.
OS suggests recovery but OS won't do that either; suggests removing new hardware (none) or recently installed software (only Windows Defender Offline is new) and can't get at Control panel to remove it.
Running Dell Laptop Studio 1537 with Windows 7 Pro legal copy. Would like to get around this without losing my data, if possible, but have Windows 7 Pro if must reinstall?
Had to rebuild my DAW after my old mother board ate it. Got a new mobo and ram and put it together today. Installed Windows 7 Ultimate 64 bit. In My Computer, Windows only sees 2 of my drives. The 3rd drive with my projects on it isn't there. It shows up in the BIOS and the System Management Storage app as healthy and active
View 2 Replies View RelatedI was using computer normally (playing world of warcraft if that matters) and then suddenly it freeze, I couldn't do anything so I've restarted it. Then 2 options pop up, start normally and startup repair. When I choose start normally windows logo appears, then after minute out so bsod flashes and computer restarts. startup repair loads okay, blue wallpaper and cursor come up but that's all, I left my laptop for all night and nothing.Safe mode doesn't work.if that maters, I care about my laptop, its always on a desk, it doesn't overheat, I got antivirus and firewall.
View 1 Replies View Related