Windows 7 Does Not Ditect The Mouse When Booting Up?
Apr 23, 2012When I boot my pc, 9 out of 10 times windows doesn't ditect my mouse. Each time I have to unplug the usb cable and re-plug it.
View 3 RepliesWhen I boot my pc, 9 out of 10 times windows doesn't ditect my mouse. Each time I have to unplug the usb cable and re-plug it.
View 3 RepliesI have tried repeatedly to get my USB keyboard and mouse to function after booting into windows 7 64 bit.I also have one ps/2 keyboard Port .There is USB mouse attached to that via USB - ps/2 adapter ( do not yet have a ps/2 keyboard)There is no ps/2 mouse port on the motherboard.My keyboards and mouse work fine in bios and legacy usb is enabled.The motherboard is an asus striker 2 extreme and in addition i have a striped Hd on which there is some data i dont have backed up and need to access.
View 7 Replies View RelatedThe USB ports work only in Bios. I have tried booting in safe mode and with a normal boot, i just get stuck at the password screen. How do i deal with this problem if i have do not have a ps2 mouse port on my motherboard?
My other problem is that all my data is on a striped raid configuration and probably not that easy to access otherwise i'd pull the hd and retreive the info. Most of my data has been backed up, but i do have some work data that i need.
My mouse won't work in the usb ports anymore and my touch pad won't work either...what could be wrong?
View 3 Replies View Relatedkeyboard and mouse do not work when booting
View 1 Replies View RelatedI recently purchased Windows 7 and was trying to boot from the disc to do a clean installation, but every time I do this a blank Windows 7 screen appears with a mouse pointer. There are no options or anywhere to click. It just stays on the Windows 7 screen.
I've tried multiple discs (32bit, 64bit and even my friend's copy)
Has anyone had a similar problem? Does anyone know how to fix this?
really have never seen anything quite like this. When I boot up my PC and it gets to the desktop, a program window pops up and the mouse and keyboard will not work.Therefore, I cannot clear the program from the desktop or go anywhere to run scans or the like to see if the problem is virus related. When I go into safe mode, it does the same thing. I tried restoring to last known configuration with no System Restore shows no restore points. I can't do anything including get you information on my PC. I am running Windows 7 32 bit on a HP/Compaq DC 7600 C/PD 950. I am running Avast Anti-Virus Suite Pro. Regardless once on the desktop, I can not go anywhere. What the heck? Right now I am working on my laptop.
View 6 Replies View RelatedEarlier xp but after win7 the booting not show xp at booting time
View 1 Replies View RelatedMy computer qwill freeze for a few seconds followed by system lag which seems to get worse (freezing every few seconds/taking 2 seconds to recognise a click etc.). If i reset my computer it resolves the issue but i was hoping you guys may be able to give me more insight as to what the issue may be.It nearly always happens when i am browsing in firefox. Have never had it happen to me during gaming etc. which is why i'm hesitant to believe it is to do with my GPU or it's drivers which are always kept up to date.i have included pics of the cursor and what processes were running at the time of the freeze/lag
View 9 Replies View RelatedLately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View Relatedi'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
View 1 Replies View RelatedI have a USB mouse which works fine when it is plugged in at boot time.
When I then (when Win7 is already up) plug the USB mouse out and 10 seconds later back in again then it is not working any more.
Another USB mouse on another Win7 computer does not have such problems.
Is it possible to turn the mouse acceleration on only when using the touchpad on my laptop and off when I'm using the mouse? I usually don't use the touchpad when the mouse is plugged in if that's an
View 9 Replies View RelatedI probably spilled some coffee on the keyboard and now I can not inactivate the mouse pad in favor of the external mouse. The only way I can eliminate the conflict is to uninstall the mouse pad. That works fine but every time I reboot for something I have to uninstall it again. As you know rebooting is common and therefore I have to reboot twice for every time I have to reboot. Anyone with a solution to this problem? This is a HP laptop. The mouse automatically installs everytime I have to reboot. I do not shut down normaly.
View 3 Replies View RelatedI have a W7 64b laptop.My mouse has started having problems, first it didn't click on things when i pressed it but if you persist it does no no big harm there. Biggest problem I am facing is the mistaking of the wheel with mouse 1. Some times when I am browsing the net and i have to scroll, and generally every time I move my mouse fast, it automatically presses the wheel. It is getting really annoying and I dont know how to stop it. I changed the mouse with another,and I had the same problem.I dont know what to do.I believe its a virus but pc didnt find anything with avast.
View 2 Replies View RelatedI'd like to have 2 mouse pointers locked inside 2 different windows and also have my keyboard inputs being active on both windows at the same time.Imagine 2 notepads open with the size of half screen each, and have 2 mouse pointers controlled at same time by the same mouse for each of the windows and typing in both notepads at the same time.whats the program called?
View 2 Replies View RelatedI have a TT esports theron its a nice mouse but for some reason it no longer reads it as such. Whenever i plug it in it reads it as HID-compliant mouse. Which doesnt allow me to use the program and set the extra button commands. How can i go about fixing this?
View 1 Replies View RelatedI just recently upgrade my system's OS from Win XP to Win 7 but I'm facing some problems with my Win 7. Whenever I boot up my system without my GPU installed, it boots up just fine. But as soon as I install my GPU i.e., GT 240, Windows 7 doesn't respond after "Starting Windows" screen or simply fails to boot. I also faced the similar problem while installing my Windows 7. I resolved that one by removing my GPU while installation.
View 9 Replies View RelatedI have a Medion Laptop and it froze so I forced it off. Now when i load it in any mode (safe mode freezes after avg file) It will go to a black screen or a 0xc0000009 I/O error message.I've run it in start up repair and there aren't any system restore points available and start up repair took 17 hours before i decided to turn it off! What is going on!? My hardware doesn't make any strange sounds and my bios recognises my Hard Drive.Luckily, there's nothing important on the laptop so i don't mind if we have to reset it to factory settings as i have the Windows 7 installation disc as well!
View 8 Replies View RelatedI have a Dell Inspiron E1505 with Windows 7 (32bit) and it's not booting. I tried safe mode with and without networking as well as the startup repair and system restore options.Startup Repair basically said that it couldn't repair this computer automatically and this: [code] System Restore said that it couldn't access a file and something about anti-virus as well as "An unspecified error occurred duing System Restore. (0x 80070005)"..Seems like my only bet is to do something with Command Prompt... but I seriously don't have the slightest clue as to what.
View 7 Replies View RelatedBooting with windows 7 and xp SP3. I tried installing 7 first and then XP and it only booted xp! So i tried in reverse putting XP then 7. BUT THEN ONLY 7 BOOTED ! I cant get the option of which id like to boot i have 2 sata harddrives.. I just cant seem to make it work any help?
View 1 Replies View RelatedMy CPU was working finw with windows XP. it has only 512+128 mb ram..I just want to test if Windows 7 works on my PC.I instered Windows 7 and during installation when it rebooted the initial screens where Pentium 4 ht comes becomes blue.after that its hanging there
i opened PC and removed the CPU battery and tried, result was same
i removed RAM and installed again. same result
i removed all the datacard to dvd,hdd, and floopy same result.
No new softrware, no new hardware, I have not made any changes to it at all. I turned it on yesterday and after the Dell logo, it went to a black screen with a blinking cursor on top left.I turned it on and off a few times with no change. I finally got into the diagnostic screen (F8)and it did a thorough scan of all hardware. It came up clean. I shut it off and turned it back on again and Windows finally came up. I then did a scan of all windows files and that came up clean. After that I did a system restore and didnt have anymore issues with Win 7 booting up. Then about 45 mins ago I turned on the laptop and AGAIN the black screen came up with the blinking. I have no clue what else to check. I could call the place where I bought it from and Im sure their crack team would most likely find the problem only after giving up the laptop for 2 weeks which is what i was trying to avoid.
View 1 Replies View RelatedI burned the .iso windows 7 file onto a Sony DVD using Active@ ISO at 4x burn speed. Everything went fine with the burn and then i put my dvd burner (HL-DT-ST DVD+-RW GSA-H31N) as the first in my bios and then restart, but then it doesn't boot...
I don't think the DVD is the problem as i put it into my mac and it shows the 2.36GB that the windows 7 .iso file is supposed to be. But interesting enough it doesn't show in vista and every time i click on the dvd the computer freezes up.
Also i tried a dvd earlier and it booted up but it didn't work (i didn't realize that the dvd was only 702mb...)
Any help? Suggestions?
Everything was working fine till last night.When i switched on the laptop today the system started rebooting infinite times.whatever i enter the system keeps on rebooting.No use with startup repair,it stalls the entire system on clicking.Unable to boot from CD too.
View 1 Replies View RelatedSo just to get this out there, i already know that it is caused by a hardware problem. The reason why is because this started happening after i replaced my case and psu. [URL]And just to let everyone know, i dont have the repairs disks that came with my computer and i dont have a recovery image.
View 3 Replies View Relatedit happened after i upgraded my Mobo and CPU, i booted my PC up and it got to the windows 7 logo and midway through that little animation it froze and rebooted, that is as far as it gets,i have tried a system repair, a system restore to an earlier point, i tried a MBR fix, nothing has worked
View 9 Replies View RelatedIt freezes just before the splash screen on normal boot.when i try to repair it the monitor goes black, but computer is still running.safe mode had the same problem as startup repairI've tried reseating the connectors to the hard drive, reconnecting all the power cables, using a different power supply and continuesly rebooting but nothing makes a difference.
View 5 Replies View RelatedI try to boot frome a DVD but doesn't want to boot, and any key i use doesn't work.It's infinite boot.after and after.And any key ai try doesn't work. Work just ctrl+alt+esc and i enter in red screen (grub4dos.etc with options with "windows with SLIC loader...etc). I don't know how to boot frome here. The common methot to boot doesn't work to me. I just want to reinstal windows 7 profesional again to never have this problem again.
View 1 Replies View Relatedsomehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot withwindows 7. but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are shwoing dynamic.and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
windows 7 is not booting up to get to the desktop. It gets to the stage where it displays a blue screen with windows 7 Professional at the bottom and begins to flicker after every few seconds
View 2 Replies View Related