I noticed that my current resolution is set automatically by Windows 7 to the max on a 22'' screen which is 1680*1050 at that high resolution everything is super sharp and crisp.. But if i try to go a little lower, even by one step, the text and the objects seem a little bit less sharp. For example if I go to the 1280*1024 resolution, like I am used to while running windows XP, the sharpness fades a little bit..
I just update my Video card driver
here are my spec:
E6600 overclocked to 3.4Ghz
ATI 4890
4GB (currently using 3.2GB on a 32-bit system)
Asus P5N32-SLI Motherboard
When i am playing a fullscreen game that i cant run at 1920x1080p (my native screen resolution) I turn it to 1280x720p but it makes the picture too wide and really big annoying black borders at the top and bottom. And by "too wide' i mean most of the gui is forced off the screen. I want to know how i can make it fill the screen. I assume that this is even possible because my console makes the picture fit the screen( on the same moniter) at lower resolutions such as 1280x720p.
After recently switching to Windows 7 from xp after doing a reformatting on my hard drive, text and pictures look blurry and hard to read. I have gotten all the drivers for my monitor and video card as well. My current resolution is 1680x1050 and is the native resolution for my monitor. I honestly have no idea what happened since I've never had these problems on xp before.
I have no idea why but in some applications like Chrome, Audacity and Installer wizards, the text is blurry. It's not blurry in any other applications that I've come across yet. I've gone through the personalisation thing in Control Panel with the Display settings, and got to the point where now only select applications and icons are blurry, is there a way to fix this in these applications?
Blurry text and icons in Audacity: Blurry icons in Paint: Blurry installer wizard text:
I am typing away whether it be an email forum reply or in note book and not noticed I've had caps on, I've done this a few times. Is there an easy way to highlight text and swap between upper and lower case?
So I bought a new graphics card, XFX 6870 2gb, and now WLMM is blurry and doesnt display correctly and crashes when saving movies. Photobucket link [URL]
I read that certain amd/ati cards don't mesh well with wlmm? Is there a workaround on this? Just bought fraps and want to make videos but with the problems im having i may just have to buy a movie maker
im listing my specs here because when i preview my post i dont see my pc specs that i filled in when i registered.
Windows 7 home x64 sp1 and all current updates phenom II x4 940 dfi lanparty dk 790fx ocz 8gb 1066 ddr2 radeonHD 6870 2gb asus ve276 1920x1080 27in lcd creative x-fi 320gb wd caviar hdd antec 650 watt tri-power antec df-85 case
Ok this is wierd I have a client using Office 2007 pro and some of her docs that she recently updated and the problem is when she prints the docs text that she deleted is printing over the top of new text she inserted into the doc.
Now when you have said doc open in WORD the deleted text is not there in any view and does NOT show in "print preview".
I opened said doc with WORDPAD and the deleted text shows up at the bottom so its still in the word doc somewhere imbedded so it prints over the top of the actual text in the doc.
Recently I wanted to check out WinXP. I installed it and it ran pretty good. But Since I use Dx 10 for some of my gaming I decided Re-install 7. When I returned to 7 I noticed WEI giving me a lower score then what I used to have. I used to have a 4.2 Aero / 5.4 Gaming graphics. Now its showing at best a 3.8 Aero / 5.3 Gaming graphics score. I say at best because first going into Windows after the re-install it showed 3.7 Aero / 5.2 Gaming. And at the 2nd day in use 3.8 Aero / 5.3 Gaming. I did everything normal as always, installed DX update, Java, Flash, Visual C+. So maybe it just needs time to improve itself or maybe I'm missing something I don't know. The Graphics Driver is up to date and is setup as it always was when I had the high score. I know Windows 7 Improves Performance over time with superfetch so I'll continue to monitor it.
I have a project where I need to search a large amount of text files on my home PC. I recently upgraded from Windows XP to Windows 7. My research indicated this feature was available in Windows 7.
If you do a search in Windows XP, you get a bunch of fields. You can pick to search for text INSIDE the particular sub folder structure.
I have found this feature in Windows 7, but it is different. I have tried using wild cards but it does not seem to work properly.
The other day I bought a new HDD, and decided to do a clean install of Windows 7 for it. After getting it all installed and installing all the drivers and Windows updates, I decided to watch a movie. I then realized that the audio volume was (as a ballpark guess) 20-30% quieter than I was used to. I rebooted and loaded up the old Windows install, since I still have it, and started up the movie and the volume was back to the level that I was used to.Reinstalled drivers; From motherboard website, from Realtek website, and even went over and backed up the drivers on my old install to reinstall on the new drive.Checked all audio panel settings, made sure everything was turned up and set the same as my old install. Made sure it wasn't an issue with the media player program I was using; Reinstalled it and made sure the settings were the same as my old install. [code]
I could use a larger resolution than my display on XP and it would just scroll, now i have windows 7, i can't seem to be able to. Most of the resolutions are gone even after unselecting only display modes for this monitor, and when i select the 1080 veritcal one it squashes it to the monitor size, because it automatically changes the display to 'display image to full size panel' instead of centered timings and leaves the option greyed out. I'm using Catalyst Control Center, what can i do to get a scrollable desktop once again?
All of the sudden, when I want to copy and paste something in the same document, the formatted text (whether that be a certain font or bold) does not transfer over to the pasted text. For instance, if I wanted to copy the following bolded word word and then paste it anywhere else in the document, I now get this: word (without the bold). This applies to other cutting and pasting problems: this applies to other fonts and formatting (bold, my Greek font, etc).One more example: before today, if I wanted to cut a text out of my New Testament Greek program right in the middle of a paragraph, the Greek font (or whatever font) would paste normally no matter what font the target MS Word text was in.
I just got a brand new computer last night, but the monitor looks very washed out, and blurry. I have researched the matter, but have found no solutions, and I really don't want to have to take it back. I ran a display quality test, and it found two errors, but didn't explain how to fix them... "Visual effects settings aren't optimized for best performance" "current video card driver isn't compatible with the wddm" My exact computer is this one... AX1430-UD30P | Product Model My exact monitor is this one... Amazon.com: Acer S230HL 23" Class Widescreen LED Monitor: Computers & Accessories?
I just installed Windows 7 Professional Version on my computer, it is a high-powered desktop with good specs. My graphics card is a 1GB HD Radeon 4850. I used to have Windows Vista 64bit and it displayed with a clear screen. However, after my upgrade, now the screen is all blurry and messed up. I downloaded ATI CCC and installed the new drivers and STILL, the computer screen is so blurry.
I was really looking forward to this upgrade to Windows 7, but I feel almost forced to revert to Vista because after looking at the screen for about 5 minutes, i get the worst headache ever and my eyes strain awfully.
I use 1920 x 1080 resolution and an HDMI cable, the recommended setting. If I go down to the lower resolution like 1720 x 1000 (not sure if thats exactly what it is) it is more clear, but I lose space and I feel it is still not as clear as it was on vista.
I just got my PC back after 3 1/2 weeks of a nightmare involving the motherboard going bad and taking two processors with it.While troubleshooting/fixing it, the PC was hooked up to a 1024x768 monitor (mine is 1280x960), and so the desktop icons rearranged.Although a small hassle in the relative scheme of things, I was not looking forward to repositioning the icons when I hooked the PC up to my monitor.But lo and behold, when I did, all the icons were in the correct place.
Currently I am sitting in front of a Windows 7 (Home) where the WinExplorer shows at the bottom an additional bar for each fodler/file.Its NOt the status bar but a second one.How do I disable/hide it permanently ?
had a look and cant find similar issue anywhere. Basically i have a dell inspiron 1520 with x3100 i had to reformat windows 7.Everything is fine except i can noticably tell my games are slower than before. I ran the WEI and gaming graphics is reported at 3.1The gaming score of WEI before i reformatted was 3.5. I have the latest windows 7 x3100 drivers from intel.com since the dell site supports vista x32 only. i have latest chipset drivers.
I just recently got a wireless adapter and installed it and the drivers but i am maxing out at 3mbps on every speed test site. when i boot into Ubuntu with the same computer and same wireless card i get up to 9mbps.
i have a compaq persario sr1630nx i just remove the graphics card i had on it do to a malfunction. and i plugged in my monitor to the original input and it looks all blurry?
I can watch a video online, as in through a browser and it looks great. But when I play back a video locally from my hard drive it is all blurry and not sharp.I have VLC media player installed. Maybe this has messed with codecs or something?It plays crappy in both VLC and media player in windows 7.How can I get my videos look right again?
How do you reassign COM ports in Windows 7? I have several 30 x USB pic programmers and they are in the 70s, 80s and 90s and I know there is nothing else on the system. My programming software can cope with up to 33 x Com ports so I need to reassign to use ports in that range. how i get in and reassign them?
I recently purchased and Xbox and Halo Reach. I had it running on 50hz mode and the picture was nice, clean and crisp. When i tried to play Halo a message popped up saying it only supports 60hz mode. I changed it and the picture quality is so much worse, it looks quite blurry. Why is this and is there any way to make it look nice on 60hz? I'm using an LCD HD TV but running through the scart.