I'm wondering if it's normal for Windows 7 Professional, Service Pack 1, to take up 51 GBs of space after just being installed.Here's my background,I just installed a copy of Windows 7 Professional to my SSD.I was running Windows 7 Home Premium on the same SSD before, but decided to upgrade to Pro because I got more RAM But, for some really lame reasons, I ended up having an issue and reformatted and re-install the Pro version 3 times today. I reformatted by installing Windows 7 Pro from the disk and "deleting" the SSD partition when selecting a location to install.It works now and appears stable.However, Windows 7 Pro is now consuming almost 51 GBs of my 60 GB SSD.I'm assuming my reformatting went bad somewhere? Selecting all of the files on the drive also says that there's only 12.9 GBs of data.
I was wondering how many Gigs is Windows 7 ultimate?Not how many ram and memory it takes up on the disk, but stand alone, how many gigs is the cd itself
I have a videoediting software that I am runing on 32 bit Windows 7 with 4 Gb RAM, the company that makes the software suggests to set the Virtual Memory/PageFile Size to double the RAM amount.I looked and mine is set to auto, I have many drives and all say none and are grayed out under paging file size for each drive. Which drive should I double the paging file ? the drive the software is installed on ? what about all my other drives, once I take it off auto they will not be managed. Should I set them all to double the RAM and if so how will it affect my system?
I have read some data that says that Windows Seven has problems with mixed sizes of memory modules. In my system I have three 2 Gig modules and one 1 Gig module. Can this cause any problems. The memory came preinstalled in my system so I assume it is of same type and manufacturer. Still trying to chase a problem with desktop heap allocation failure at boot up.
When I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
I am running out of space on my system drive (120GB SSD with < 6GB remaining). It happened in only 12 months. I'd like to know where all that space went, which files are using it. So I'm looking for a way to rank files by size regardless of their folder location, largest-to-smallest, ideally without a full scan of the disk if there are internal indexes that have this info.
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100 os: win 7, processor: i7 2.8 ram: 16gb (max it will take) video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
Since upgrading to Windows 7 Home Premium I can no longer use any of the HP Printing software that came with the HP 5280 All In One Printer which I had set up with custom paper sizes to print large panorama photo's,eg 420mm x 210mm.I know the printer is capable of printing photo's this size as I have printed many panoramic photo's in this and similar sizes when I was running XP.I have set some custom sizes in Print Server Properties and the settings are being saved there but they do not appear in any paper size lists in Windows or in the HP printer preferences.This is the procedure I'm following.1) Click start menu,then Control Panel,and finally View Devices And Printers.2) Click printer in the list(HP 5280),then click Print Server Properties.3) Click Create New Form,type a custom paper name in the Form Name text box and enter the desired paper size under Paper Size.Click the Save Form button,and the new form is present in the paper list
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
Ive just took delivery of a custom built pc with a 90gig ssd drive as the boot drive and it seems like windows has took up almost half 40 gig plus, now i know it should be around 25gig so how do i find out what taking up all that space.
I have just installed Windows 7 Ultimate 64 bit CZ + all updates including service pack Installation was done on empty (formated by installation) 60 GB SSD
Result - used 37,8 GB, free 21,6 GB (out of 59,5 GB) - data provided by explorer
Installation started less then 24 hours ago, finished about one hour ago (including sleeping, downloading and installation took about half of this time)
Installed - on C drive
1) Windows 7 Ultimate 64bit CZ - what was given by installation disc
2) ati catalyst driver center
3) all windows updates - including service pack (before installation of service pack free space was more then 25 GB...)
4) Internet explorer 9
5) Adobe reader and flash player
6) Firefox 5, total commander, winamp, daemon tool, kmplayer, pidgin - all this sw was installed on separated disc drive D (but created some files in profile etc...)
Now I am going to continue installation with MS Office 2010 (on disc D:-) .... I am not surprised because, I formated and reinstalled Windows becuase I run out of disc space on C drive before this installation after 2 years... (there were some other application up to 10 GB on C drive, the rest - 50 GB was used totally by windows.....)
How long I will survive with Windows 7 and ONLY 60 GB system disc???
Yes, this is an old issue but I wanted to summarize a few points, and open it for further discussion:
(1) Optionally displaying size of all folders has been a top-requested feature for years
(2) Windows 7 Explorer does not have this, although hovering the mouse pointer over the folder will show individual folder size.
(3) The Mac Finder displays folder size, although it's not enabled by default.
(4) In XP, Windows add-on tools like FolderSize and TreeSize Pro would add a column to Windows Explorer showing folder size. Unfortunately the underlying API IColumnProvider was removed starting with Vista, so these tools don't work in either Vista or Windows 7.
There are various arguments why Explorer can't display folder size, such as it would burden a network drive, it would be too slow, wouldn't handle junctions correctly, etc.
These arguments break down because it has already been done: the feature has already been implemented on both Mac and Windows 3rd party tools. We can see ourselves how well or poorly it works. In general it works pretty well on local drives on contemporary hardware.
Re network drives, it's easy to programmatically discriminate between network and local drives. One solution is only enable folder sizes for local drives. As on the Mac, another solution is don't enable it by default. Many users won't turn it on, so this lessens the impact.
There are more sophisticated future solutions possible to optimize folder size query of a network server. E.g, the server maintains folder size info and reports it to the client, but these aren't needed as a 1st step. The lack of these don't preclude folder size working on local drives today. Proof of this is Mac and 3rd party XP tools work fine on local drives right now.
With this in mind and considering Microsoft spent 6 billion dollars on Vista and several billion more on Windows 7, why wasn't folder size a basic feature of the Windows 7 explorer?
i have a new nvidia video card that allows me 3 monitors - however the first two are 'spanned' giving me a work area of 3840 x 1080 (which is perfect for my video editing), HOWEVER:when clicking the maximize symbol in the upper right hand corner the application window will spread across both monitors.is it possible, or is there any software, that will allow me to set the size of a maximized window?i also get all windows messages opening in the center of the two screens, very annoying and sometimes hard to read.
I am currently attempting to have folder sizes shown in lists. I have 'display file size info' checked in Folder Tips check box, to no avail. How can I get Win 7 to display the size of each folder, as it does with file sizes?
I just built a new PC with a 120GB SSD and installed Windows 7 Ultimate. The Windows folder size on this machine is about 22.5GB, which seems kind of large to me. I have Windows 7 Pro on a laptop and the Windows folder size is around 12GB. Is there some things I can safely remove from the Ultimate install to free up some room. I'm already using about 2/3 of my new SSD and I need to load a few more applications.
I just installed x64 on my 64GB SSD and was shocked to see that I only had 24GB free after the x64 installation! I thought that x64 was only supposed to be 20GB or so? I did a clean custom installation (double installation method) using an upgrade disk and made sure to format the drive before installing. I just wanted to verify that x64 does indeed take this amount of space (35GB).
