Windows 7 Fresh Install - No Internet / Network Connection?
Jul 8, 2011
Ok, I'm going to give a small amount of back story here as it may be relevant to the current problem. Yesterday I formatted my Win XP PC and tried to install Windows 7 on it. 3/4 of the way through the installation my PC would restart, and upon loading back into windows I would receive this error message:�The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click to restart the computer, and then restart the installatioThere were a number of possible fixes to this problem detailed hereI eventually got the installation to complete properly by removing my Sound Card and my Network Card.Ok, now onto the current problem. As stated, I have a new, clean install of Windows 7 32 which seems unable to connect to our BT Home Hub router. I have an ethernet connection to the router (lights: check, and cables are secure etc) and also a Wireless Network Card which may or may not be in a functioning state. By which I mean, I have had problems with it in the past but I can't remember exactly what is wrong with it. However, as I did with my XP install I want to connect via the ethernet cable.
In the Network and Sharing Center there are no networks listed.I have attempted to update the drivers for my MB and the Network Card, neither of which seemed to do anything.If I try to ping google or anywhere else it fails.This could end up being a very simple issue, but I'm completely new to Windows 7 (and skipped Vista) so I don't really no where to go from here, and am kind of burned out after spending 8 hours yesterday just installing windows.My PC specs:Custom BuiltOS: Windows 732bitMOBO: ASUS M2N4-SLICPU: AMD Dual Core 3 GHzGfx Card: GeForce GTS 250Network Card: Realtek 8185
I just got an Acer Predator. I transferred settings from XP using Windows Easy Transfer. The Internet connection was working perfectly. I installed Comodo Firewall, Avira AntiVir and ThreatFire. Then it could not connect. I plug the Ethernet cable into the XP computer and it connects no problem.I tried a system restore and it didn't fix it. I am running a thorough AviraAntiVir scan now on the Windows 7 system. I don't want to assume it is a virus, but the system was unprotected until I got the three security applications installed. I did also see some Comodo warnings and I approved going ahead because the security apps were installing at the time.
I recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.
I have a problem connecting to the internet from my laptop. This is a screenshot of my Device Manager. [URL]
Don't worry, no viruses or anything. The diagnostic tools and built-in problem solving tools do nothing, as usual. If anyone could link me to a website to update it And it has to be specifically for my device since it cannot update through the internet.
I just did a clean install of windows 7 on my computer and I don't have any drivers, I need to go onto the internet for that, but it's telling me I cant get on the internet because I dont have some driver. What do I do?
Got a new SSD and just put win 7 pro on it, However I cannot get it to connect to the internet it says to install the driver I tried to do the windows update to auto update my drivers but can not connect to the internet to even try.
How would I find out what network card I have, could I just load it to a flash drive an do it that way?
If it makes a difference it is a wired connection.
Family member got a new laptop for Christmas and asked if I could clean it up. So I just went about freshly installing Windows 7 in order to rid of the ridiculous bloatware. Well, same OS installed fresh and the computer won't detect anything from the USB ports, the ethernet port or the wifi adapter.
I stupidly tried to upgrade to Windows 8 on a Windows 7 Gigabyte slate S1080. It didn't work and now when I try to reinstall Windows 7, network and USB are not detected. The windows 7 installation is trying to find the device drivers but as there is no CD ROM and the USB is not detected, I can't go any further
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
I was dealing with a BSOD problem which I was helped with greatly over in the BSOD section. It basically led me to doing a fresh install of windows 7, and I have not had a BSOD since. But since I have done a fresh install, When I wake my desktop up from sleep mode, it takes about a minute to a minute and a half for it to connect to my network. Before I did the fresh install. I would wake my computer up, and my internet connection would be ready right away. My wireless adapter is TL-WN851ND. I have turned off the power save feature on my adapter, and also turned off the power save feature that windows has, and its still doing this, and I really cant figure out why. Its really not a HUGE deal, as long as it connects, but I am an extremely impatient person when it comes to things like this.
So, we have a network of about one terabyte of storage on it. It is normally connected to my laptop, a desktop and our Playstation 3. Obviously it connects via internet with our wireless router and such but for some reason it won't connect to my laptop? I have everything except a few programs on the network (Everything from my documents to my pictures to my other programs are stored on the network)...thus not being able to access it is a HUGE difficulty
ACER Eee PC running Win7 with all windows updates. The problem is the machine running Windows 7 Home Premium intermittently loses "internet access". Where the bars are full, but the ! shows and there is no connectivity. The other Win7 machine is set to automatically install updates and is running fine, although it seemed as though I was restoring it every week or so to get connectivity.Back to the point, the machine in question is Win7 and all available updates are installed.Bonjour service is "stopped" (but it runs fine on the other Win7 machine), TCP/IP was reset, Winsock is reset, registry/temp files cleaned via CCleaner. Zone Alarm Free and AVG are running, but they were running this morning, yesterday and a while ago when it lost connectivity again. One time I went to bed annoyed ready to set the %^&* thing on fire, but in the morning it was working fine!
I'm not exactly a N00B, but I'm dying for an explanation or a fix other than restoring every time "internet access" isn't available. Mind you, this house is full of nerds...Android phone, two iPhones, Lubuntu, Win7 Basic, Wii...all wireless and a wired Vonage that all works great.I was a member of That Computer Guy forums for a couple of years and learned a lot from the moderators and know how much work you guys do to give us this free service.
I seem to have a situation where my wireless connection does not include my local network, so I cannot see or connect to any local computers on my network but I can connect to the Internet just fine wirelessly. Of course, if I wire into the Ethernet port I can see the local computers. I know I should be able to access the local computers wirelessly but I cannot seem to find the "switch" to combine local and Internet access.
I have installed Win 7 - Build 7100. It worked for 2 hours and since then all I get is the network icon in the bottom right with the yellow triangle. It states unidentified network - no internet access. It is a NVIDIA Network controller on a ASUS Striker II Extreme board.
Hi, I have a strange problem. I installed Windows 7 on my office laptop and it works fine. When I then take my laptop home and connect it to my wireless network at home. I can't surf as expected. What happens is that the laptop connects to the wireless network without problem, however when I start browse the web, i get something like "Website cannot open, check your Internet connection" 99 times of 100. But there is no problem with the connection to the wireless network. Any ideas?
I have recently gone from a satellite broadband connection which I had set up through a home network, to using a Sierra Wireless Aircard 753S on the Australian Telstra 3G network. Under my previous set up (Satellite internet through a Netgear Wireless G router - WGR614) I have a desktop with Win 7 Pro and dual booting with Linux Mint 12, a Dell laptop with Win 7 , XBox 360, a Digital TV Tuner (DXTreme) and a Samsung LCD TV Series 6 with wifi connectivity all connected in a network. I also have an ASUS Transformer Prime TF201 that I would like to include in teh home network.Now I have internet through a hotspot Sierra wireless aircard (meaning the desktop and laptops connect direct to it) can I still have a home network running on all the equipment, not to access the interenet but for file sharing etc or is this something that could have conflicts etc and at the same time have internet access through teh aircard.Since going to the aircard and no internet access on the network, the LAN is not longer working, so am wondering not only if there could be conflicts but also if I should reset up the network from scratch again.I'm thinking along these lines because it appears I am unable to use the aircard with a router to have a network that way.
I've had a wifi network set up at my house for several months now, and no problems. If I couldn't connect. I always just unplugged the router for 10 seconds and was able to connect. Suddenly today, I can't connect to the internet, but my wifi network appears to be fine. It says I have excellent signal strength and that I'm connected but I can't connect to the internet. When I go to the program that came with the router and hit "repair".
It says that I am connected to the network, but that my internet connection is broken...??? I tried using another device to see if I could connect with internet, my ipod touch and it also said that I was connected to the wifi network...yet it could not connect with the internet. It never had a popup that said anything, it acted like it was trying to connect but just never did.
I have 3 computers running Windows 7 Ultimate x64.
I connect them to a hub and set a workgroup name. Everything is working fine. All of them are able to see each other and access their shared drives.
However, once I unplug internet line (all computers still connect to the same hub), computer cannot see each other and cannot access shared drives anymore. Also, workgroup name is changed to 'Unidentified Network'.
What should I do to connect to a network without internet connection?
My desktop has recently been upgraded to Windows 7 Ultimate from XP. I set up a home group at another location, then returned the desktop to my normal connection. The wireless card I used was a D-Link that is XP compatible only, and I found this out after attempting to install, then I checked on it later. I deleted the driver, and tried a Netgear WT111G USB wireless card. Install failed, and I went online to look for a compatible driver.
I downloaded a driver, installed it, and the wireless card was detected, but could not connect to the internet. Uninstalled the driver, and tried plugging into Ethernet, and cannot find my home connection. Can only get into network settings (home,work,public).
Has any one here heard about this problem after creating a homegroup? Trying to troubleshoot, but it's a specific problem I'm not familiar with as of yet.
The faulty drivers are no longer on the PC, but it's still unable to find a direct wired connection.
My home network loses internet connection when Windows 7 is active.
I have three machines with XP, one Apple and my current laptop with Windows 7 all connecting to the internet through the same router. After about 5 to 10 minutes of Windows 7 running I lose internet for the entire network. I have been able to replicate this problem six times consecutively. The router will indicate that the internet connection is active, but it is not. If I reboot my laptop to XP I must also restart the router to regain the internet connection to the entire network. Also, all computers see the network as active and running properly even when there is no internet.
Windows 7 machine is a Dell Precision M6300 fully updated with necessary updates and drivers from windows update.
Router is a Westell VesaLink Model: 327W this a standard issue wireless router from Verizon DSL
I am looking for ways how to disable the internet connection without interfering the LAN/Network. So i found the solution by putting the wrong default gateway and DNS. But when you check on the automatic obtain IP address and DNS, internet can be accessed again. And when i used and administrator to limit the user's privilege, there are certain programs that are disabled. how can i totally remove internet access?
My brothers advent modena laptop stopped working and it turned out it was a hard drive issue. I replaced the hard drive and reinstalled windows 7 32bit. I had to download a iso file from [URL] as he wasn't give a installation disc. The install went fine except when it was finished there was no internet connection available. I tried to troubleshoot but couldn't find any network drivers.
However, I am unable to understand exactly what to do. I had to install Windows 7 Professional from the Home Edition and after the final reboot no internet connection was available. I am pretty inexperienced in computers and am unable to following the instructions posted prior.
I had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
M wireless is flaky to say the least. Realtek 8185 adapter connects sometimes to the interwnt but is painfully slow. Drops connection all the time. My network name changes intermittently between "xxxxxx" and "xxxxxx 2", my network switches between home and public.
I'm trying to share an Internet connection via bluetooth.
The host: HP 8740w laptop running Windows 7 Enterprise x64 Connected to the Internet via Local Area Connection (wired) The client: Asus Transformer tablet
I have a bluetooth PAN setup and the devices are communicating properly. They both have IPs in the 192.168.44.x range, can ping each other, and I can use a Remote Desktop client on the tablet to control the PC.
The last piece I'm missing is giving the tablet access to the PCs Internet connection. I go into Network and Sharing Center, click Change Adapter Settings, and open the properties of Local Area Connection. On the Sharing tab, I check Allow other network users to connect through this computer's Internet connection. I then click the Home Network Connection dropdown, and Bluetooth Network Adapter is not listed. I see others, including my wireless card, VMware virtual adapters, VPN adapters, etc..
I've looked at the Bluetooth Network Adapter's properties, and it doesn't seem to be missing any protocols that the other adapters have. It's enabled, connected, and working fine locally. Is there a registry hack or something that I have to do to make it show up in the ICS list?
The wireless is one I share with my roommates and is fast. The wired NIC connects to a router which has slower internet. The reason I connect to the wired router is so my PC can talk to a linux machine, which I use for some data downloading/analysis.I want to disable internet from the wired connection but keep the ability to talk to other machines on the wired network. I just changed the IPv4 settings and deleted the DNS server information. Is this the best way to do so? I want the wireless to provide internet.
I have a hp compaq laptop and am able to use the wireless internet connection..however I also have a Dell Inspiron notebook, a few days ago I lost internet connection on the dell but the HP was still connected. I have contacted my internet provider and they say there are no connection problems and all is fine. They think the problem is on the dell unit. I have tried disabling and enabling the Lan and wireless network connection. The system recognizes the wireless router but wont connect to it why and what can I do.
For the last 3 months my internet keeps dropping in and out, sometimes for a long period of time. But it always shows full bars in the wireless network connection on our computers. I have been on the phone to the internet company for hours and hours (each time speaking to a different person-so no help there) and they can't figure out what is wrong.
They sent me a new modem which worked for 10 mintues and then was dropping in and out again. The same issue is happening on my roommate's computer too, and I am able to access other wireless networks in other locations too with no trouble. So not an issue with our computers.
I have recently been having difficulties with connecting with my wireless connection. We have a in-home router that is connected to two computer's downstairs by cable. I however own a Acer, Windows 7 laptop that I mainly use upstairs and I get a Excellent signal strength.I have connected to my Home wireless connection before with no problem but recently the connection keeps coming up as ~Identifying... No Internet Access.Also when I have had connection to this network prior to this problem the connection is under Home. But when I try to connect to the same network it comes up as Public or just keeps Identifying. I have the connection set to Connect Automatically.Also the yellow triangle with the exclamation point almost always pops up immediately when I reboot my system or after I Disconnect and Connect the network again. I have tried Disabling and Enabling the network in the adapter settings and this does not work either. In the manage wireless networks tab, I have repeatedly deleted the connection and reentered the security password and again put it as automatically connect but it still comes up as Identifying. I have seen many people with this same problem and have tried many of the suggestions to no avail.It is rather bizarre because my connection will be in this Identifying state for a while and randomly connect properly and I have no idea what makes it go off and on so erratically. I just had it working again for a few days and it is again acting up.
