I was told that I need to have my event log cleaned up (those that show crtiical error more than anything else) so that it would not fill up and cause a computer crash? I have never heard this before for a home computer.
View 1 RepliesI was told that I need to have my event log cleaned up (those that show crtiical error more than anything else) so that it would not fill up and cause a computer crash? I have never heard this before for a home computer.
View 6 Replies View RelatedI looked at my specific manufacturers toolbox to see details about the drive and I noticed that it has already accumulated over 5 billion writes so far. This thing is a little over a week old. So then I'm looking at my event logs and I'm thinking that every single one of these entries is a small write here and there and EVERYWHERE and it just never stops!! Then I tried to move the logs to my D: drive by modifying the settings within Group Policy Editor (gpedit.msc) and the major ones did move there, but then there are over a hundred different other log categories under windows and there were no group policy settings for those. I was inspired to start this thread by another thread regarding clearing all those log files with a simple bat file. That conversation is here http://forums.cnet.com/7723-19411_102-378338/delete-all-event-logs-at-once-in-windows-7/ They came up with a .bat file that does clean them all out with one swoop. I am not good with those things and I was hoping that modifying something small would enable those certain files ending in .evtx to be moved to a new location and registered within Windows. Otherwise it's a huge amount of time going through each one to change the location from within the Event Viewer.
View 3 Replies View RelatedS13013E started the discussion (thx) in "Delete all event logs at once in Windows 7". [URL]
View 3 Replies View RelatedI have a PC I assembled last June. After I loaded it up with my applications and connected my devices I began getting device disconnect sounds as well as a few device connect sounds. I've been troubleshooting by disconnecting all devices then adding devices back one at a time to try to find the culprit. I'm not getting consistent or convincing results so far, but will keep working on that approach.
A Web search on the subject returns lots of results where users are experiencing these sounds. Answers are sparse. And antagonizing! I have not found any hints as to how to extract from the system what is actually happening. What I am looking for is if anybody knows where in the system I can find a log that records device connect/disconnect events associated with these sounds.
CASE Cooler Master HAF 912 RC-912-KKN1 Mid Tower
MOTHERBOARD ASUS P8P67 Deluxe LGA (P67 B3 Rev)
CPU Intel BX80623I72600K Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
[Code].....
I have looked all over the internet and these forums for an answer before I posted this. I can find little pieces of help here and there but not fully what I need. I need help writing code in a batch file that will allow me to automatically save the event viewer logs to a certain location with a certain file name and then clear the log out of event viewer.
1. I have 6 logs, Application/Security/System/DNS Server/Microsoft Office Diagnostics/Microsoft Office Sessions
2. I would like these logs to be saved with the building name that the servers are located in, also including the date that it was cleared and which log it was
3. Example of saved log name: "Bldg 248 16Nov12 Application" (date can also be in 20121116 format)
4. Logs need to save to My Documents Folder
I have looked all over the internet and these forums for an answer before I posted this. I can find little pieces ofre and there but not fully what I need. batch file that will allow me to automatically save the event viewer logs to a certain location with a certain file name and then clear the log out of event viewer.1. I have 6 logs, Application/Security/System/DNS erver/Microsoft Office Diagnostics/Microsoft Office Sessions2. I would like these logs to be saved with the building name that the servers are located in, also including the date that it was cleared and which log it was3. Example of saved log name: "Bldg 248 16Nov12 Application" (date can also be in 20121116 format)
4. Logs need to save to My Documents Folder
I've been having issues with two of my games, Hearts of Iron II and Civilization V.earts of Iron will play for a couple 'days' or a couple months before crashing. While Civ V could play for a while or crash instantly depending on what I select. I checked the Event logs for these crashes to get these[CODE]Now I've run some tests on my memory and it seems everything is physically.I ran some registry fixes that claimed to fix things, but didn't resolve anything. I uninstalled and re-installed the video driver.I've tried uninstalling and then re installing the games themselves. It should probably be noted I just recently installed a harddrive and this problem has only been since then. My current suspicion is that something is messing with my CPU usage and these two strategy games are burning through the memory for some reason
View 9 Replies View Relatedevery mouse drag event will make the app is running crash. (For example: when you IE, I select a line of text, or some time I click the mouse and drag). Everything just can fix when I restart, and I will meet again at some time?
View 3 Replies View Relatedi was playing f1 2011 and then it suddenly froze. i had to press alt+f4 to close the game. looked at the event viewer and there was event id 1000. then i again started the game. it again froze after some time. the same error message. today i have been playing since morning and everything is working fine.
here are the error details.
Faulting application name: F1_2011.exe, version: 1.0.0.0, time stamp: 0x4e5821b5
Faulting module name: F1_2011.exe, version: 1.0.0.0, time stamp: 0x4e5821b5
Exception code: 0xc0000005
[Code].....
I've got a new PC, Windows 7 Home Premium x64. I have installed Adobe CS6 on it. Illustrator crashes at least once/day, and Microsoft Outlook 2003 crashes a few times/week also. Both list Event ID 1000.I have uninstalled and re-installed both with no luck. There is seemingly no pattern to the crashes, sometimes occur while printing, saving, importing objects and sometimes while that program is sitting in the background.
Here is the error log for two of the crashes: Faulting application name: Illustrator.exe, version: 16.0.2.682, time stamp: 0x5056c659 Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e Exception code: 0xc0000374 Fault offset: 0x00000000000c40f2 Faulting process id: 0x1530 Faulting application start time: 0x01cdd496cc31692a Faulting application path: C:Program FilesAdobeAdobe Illustrator CS6 (64 Bit)Support FilesContentsWindowsIllustrator.exe Faulting module path:
C:WindowsSYSTEM32
tdll.dll Report Id: 5296a8dc-40ad-11e2-81f0-e06995e36c7a
[code]....
My current system was upgraded to windows 7 32bit from vista 32bit (I bought the windows 7 home premium upgrade disc when it was first released). I am going to build a complete new system. Can I install windows 7 64bit from the same windows 7 disc? Or do I have to buy a new windows 7 disc? Is there a way around buying a whole new disc?
View 1 Replies View RelatedI'm not sure if I turned it off or not the other day and for some reason my security logs are inconclusive. Are there any other ways to find out when it was turned on, and when it was turned off?
View 2 Replies View RelatedAfter I leave the computer for a while, the moniter shuts off for a second, and displays the login screen.
The computer used to stay logged in all the time, so i'm not sure what happened...
Got a new home build Core I5 3rd gen at 4.4GB 8gb RAM, 120 SSD with the OS, 2GB HDD for anything else, ATI 7970. Win 7 home 64 bit. When I play games, I can play for a while, then I get Game name has stopped working, or a BSOD?
View 1 Replies View RelatedI have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.
View 1 Replies View RelatedBasically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies View RelatedCan anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
So my computer randomly freezes up and when I boot up there are no log entries of the event. There are however always 3 log entries but I don't believe they are related to the actual problem. The 3 that are always there are: 6008, 7026 and 41. Now when I say it freezes I mean it literally freezes up. I do not get any blue screen or black screen or any errors it literally freezes as if I took a screenshot of my desktop and was looking at it. I can not use my mouse or keyboard I can not hear anyone in a skype call or anything it is FROZEN. The only way I am able to reboot it is by holding the power button which thus gives me the error code 41 above.
View 6 Replies View RelatedRecenlty I used to have a full memory dump when I used my other drive as a cache. I got this from an old crash report in event viewer on my win 7 pro,I made it the mini dump on my C drive for the last few weeks as im using an SSD. Though for a while I had no page file at all and noticed it wouldnt save a memory.dmp, so I gave C: 100-500 megs again as it keeps crashing. My old memory dump still on C drive from a month or so ago is 480 megs, so I cant upload that.
[code]...
I would like to know if there is a way to play a sound when the computer is locked and/or unlocked, similar to the way a sound normally plays during log on/log off. There's no obvious way in the Sounds options window.
View 2 Replies View Relatedi thought was a hardware issue but its not everytime i put my computer to sleep it wakes up after an hour or so, i have disabled all network adapters from waking up the computer i have disabled all programs and my mouse from waking up the pc i have checked over and over on the task scheduler to see if anything wakes the the computer up from sleep and have yet to find anything .
now the strange part is here when i click on the cmd and type in powercfg lastwake nothing shows up like it wont tell me what woke up my computer
but when i go to to event viewer the same program keeps loging on my pc no matter what itll look something like this logoff, then logon logon Special logon and then it will turn on i will past the information from the even viewer below
logoff
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
[Code].....
Problem:
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
I have noticed that my event viewer log is showing successful logins when my computer is off. Is this normal? Does the system ever "log itself in" while its off?
View 5 Replies View RelatedI have built a computer almost exactly to the one that they had built for Jeff on Tested.com. Everything seemed to install fine and run smoothly. Recently, I have been getting BSODs and they seem to be somewhat random. Usually when I am watching movies/streaming online/listening to music in Zune or iTunes. I don't really understand why this is happening. I have been looking around the internet and many people say that memory could be the problem but I have tested it with the windows memory test tool, all results have come back with no errors. I for some reason cannot Memtest to run.
View 5 Replies View RelatedI want to build an inexpensive but not junk computer. AMD was suggested to me and it sounds good but I have no source of information except from you folks.Could you help me find an inexpensive motherboard for this CPU? On board audio and video would be ideal and USB 3.0 and maximum of 8Gb of memory is a must. What confuses me is that the CPU calls itself AM3 but when I do a search I only find AM3+. I'm not a computer dummy but I'm not up on AMD.
View 9 Replies View RelatedI'm looking for help in building a new Windows 7 HTPC. What components are you using? All I would like to do with mine is be able to use MCE and record HD, playback movies, maybe bluray (I own a stand alone for that)...No games just home theater.
View 5 Replies View Relatedi just build a computer but it does not have sound. it only works when i plug in earphone. and the ad audio driver is latest.
View 7 Replies View RelatedThis has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM
[Code].....
Dell XPS 9100 with Windows 7 pro X64. Dell support is no help, they just keep saying it is a software issue because their boot diagnostic doesnt show any problems. It quite often makes me do a system restore before i can get back into windows after it happens. Event log says Critical type, Kernel Error. System is less then 6 months old. I have had this problem for 3 of those months for a total of about 8 times.
View 9 Replies View RelatedI just built a new computer for my inlaws and had several BSODs with different bccodes (1, 1a, a). I formatted and reinstalled the OS, updates, as well as clean installs of all recent drivers downloaded from the manufacturer websites. I have had several BSODs after this and I am worried that it may be related to the memory I have installed.
I ran a full disk scan, as well as SeaTools short and long tests. These were all passed with no errors. Also, I have updated the bios to the most recent, reseated ram, unplugged/replugged all sata and power cables inside. Specs are as follows:
Windows 7 Home Premium x64
CPU: AMD Phenom II 555 3.2Ghz Quad Core
Motherboard: Asus M4A785-M onboard sound, video, wired lan
Memory: G.Skill 4GB DDR2-800 (2x2gb) F2-6400CL5D-4GBNT
HDD: Seagate Barracuda 320gb SATA2