In HP laptop with Windows 7, there is a touch buttons to enable and disable audio and wifi. Now they are disable and touch buttons doestno work. No missing drivers in device manager, but they dont works because touch is broken
I recently updated my NVIDIA card with audio drivers and now it can make the audio go through my television using HDMI (watching videos). The problem however, is that when I go into the Sound settings and change the default to the NVIDIA "device", I need to reboot windows to activate the change. I have tried going into the mixer and the sound setting and I can't figure out a way to change the active audio device without having to reboot (or even just log out and log back in).
After installing Windows7 Ultimate x64 on a EEE PC Asus 1215B Seashell serie, the button which toggle wifi did not work anymore, like any other keyboard function keys (less importante now). When I log on I receive a message in a popup windows which says: You must install ATK0100 driver! I had installed the P4GX before noticed the problem. I've tried to install the driver downloaded from asus support site but I receive an error message in a pop-up windows, without any clue about what the problem is. Nothing is registered in Device manager, nothing is found in Registry, no file related to atk* in system32driverstorefilerepository. It's not possible remove nor reinstall, cause nothing bad remains after my failed installations. I've tried many times, with Troubleshoot Compatibility and Run as administrator (my regular user is also an admin). After executing the driver app, one command prompt appears showing the log of the installation process, and all of sudden disappear. No control about it. It's only possible to read the upper case word FAILURE before the window close. No log is found. It works when I restore the machine to Windows 7 Starter that comes from factory. I dont know how to get the drivers inside the hidden partition.
I only learnt about this a couple of weeks ago!If you want to make the Aero Peek button at the far right of your Taskbar into a plain and simple Show Desktop button:Simply right-click the Aero Peek button and un-check the "Peek at desktop" option. Et Voila!! That's it!
recently I used a software AVG PC Tuneup and it has never been a problem for me until a couple of days ago when I decided to install it on my DELL. Now, I went to system advisory and did a system scan on recommended settings, I pressed 'fix selected' and my Wifi was disabled, I tried everything. I can't get my wifi to work without plugging in my modem directly ot my pc. I noticed my wifi radio was disabled, so I pressed the F2 button but nothing worked. I am trying to re enable my wifi radio / wireless radio connection button but it won't work.
My program intel my wifi utility tells me my wifi is disabled but I can't enable it.
System information Manufacturer: Dell PC Model: Inspiron N5010 System Type: 64-bit Windows 7 Professional Screen Caps
Ok so when ever i hold w button and pressing up button its not scrolling or not moving up i mean i play fifa 11 and fifa online i have w as sprint i cant sprint up.
When i press my left mouse button it should trigger another button on the keyboard, and as long as left mouse button is pressed they key on the keyboard stays pressed (virtually of course).
I installed all the drivers available from the Gigabyte website for some reason the wifi function simply does not work. Also, the screen plugged into the 7950 works fine but the other screen connected into the motherboard gets the message "no signal detected".
I know about trick of renaming regedit.exe to regedit.com from the command line. But that works only when the .com association is NOT broken.What do I do when BOTH are broken?
I have a compaq cq56-115dx latop, and looking for some input on a problem I have. I attempted to upgrage my ram from 2 gb to 5gb. The 4 gb chip went in ok on the bottom slot, however, when placing second 1 gb chip, I accidentally broke the levers. Since it was now broken I decided, to see what would happen if I gently replaced cover, to hold chip in place, ad screwed cover on firmly. Turned on laptop, and all is working fine, including all 5 gb memory is available. My question is should I leave it the way it is, or should I have it fixed properly. FYI the cover over the chip is vented.
I was talking to some friends over skype when i needed to log out and my mic was fine there were no problems with it. i logged out and when i logged back in and called a friend up on skype he could not hear me talking the only thing he could hear was a loud static noise. i went to configure the settings but it said i tried everything and it would still make the noise. i tried plugging in a brand new mic that has never been used before i took it out of the packaging and plugged it in and still the same problem.
I recently tested windows 7, 6801 only because you cant get the beta in 64 bit yet. Anyway. I use 2 260 gtx and under windows 7 games play much better than in vista BUT they would only run properly when sli was disabled. SLI mode in windows 7 for me was totally broken. The computer would freeze and not recover. The only way was to reset the computer. I hope it is only a driver issue since they do not make graphics drivers for 7 yet but geeze that really sucks. Is anyone else using sli in 7? I used 64 bit.
So the SATA connector on my old 64GB SSD snapped off, now it's become a crap shoot just trying to get the bios to recognize it. I've already accepted I'll need to RMA this one, and even bought a bigger replacement for it.to the nature of my OS install I am a bit confused as to how I should go about reinstalling windows. I'd put the main OS files (and drivers) on the SSD, while storing the users folders and everything else on my larger HD. Now however I am left with just my windows 7 install disc, and a 1TB harddrive I know has my user folders on it.How should I go about installing it? Is there an easy way to simply use the already established folders and the like, instead of manually moving/deleting the old ones?
I have - A Laptop with Windows 7 UltimateA Linksys Wireless Router with ports which are all Ethernet ports (i.e. no USB ports).A Tata Photon Plus (which is basically a Wireless USB Modem)I have been trying to setup a wireless network to have my handheld devices connect to the internet.I have - Connected the Ethernet port of my laptop to one of the Ethernet Ports of my Wireless Router.I have connected my Wireless USB Modem to my laptop (as my Router does not have a USM port).My Questions While I have been able to setup the Wireless Network, the Network shows "No Internet Access". Can someone help me with how to bring in Internet to the Wireless Network? I am sorry but I don't have enough networking acumen which would enable me to do this without assistance.
i have a samsung galaxy ace. my laptop is accessing internet through wifi from my friend's building. So can i access internet in my samsung galaxy through wifi from my laptop? if yes..how?
I was playing total war shogun 2 on windows 7. Diagonal lines started shooting out of the characters, square block patterns start flashing all over the place. The graphics got progressevley worse and worse so i took in. They tested the graphics card and it was fine so they restarted the computer and then windows crashed. They reinstalled windows 7 and i started putting everything back together.
I just put total war back on my computer and started playing and its started again. I restarted my computer and all that came back was a blinking undersscore. Luckily i shutdown and it started normally but the graphics are still messed up.
i have been attempting to open some .exe files but keep on getting the message 'not a vaild win32 application'. A scan with Super Anti spyware shows the following - System Broken File Association HKCR\.exe. I am assuming that something is wrong with the .exe link. I have checked the list of defaults and noticed that the .exe default was missing. I have also tried some fixes which appear to attempt to change the registry, but these have not worked. Do i need to manually change some registry content?
what caused the problem: inserting a usb mouse ive been using for half a year. i got a bsod and now the D partition is broken. already tried re-installing C with a new windows, but no luck.How can i try to get the data out of D if thats possible? i already ran some kind of live CD, but it couldnt access the D partition...i need something strong, and if its not possible to get any data, whats a good formatting app?
i moved into a new house last week and when i turned on my pc i noticed how there was a 3/4 inch black gap between where the screen displayed colour and the end of the screen. I have installed the newest graphics drivers on my sapphire radeon 4850HD but it doesn't seem to change.. There are no new important windows updates, which i thought it would've fixed it in the first place. anyone have any idea?
Intel G45 WDDM drivers are highly unstable and give consistant BSODs in media center. This includes the drivers that ship with Windows 7 RC (7100). Any ideas where/when we can get some more stable/better drivers?
i have 2 hard drives, one running xp, one running windows 7.
up until recently they have been working fine together, but i think i had/have a virus and it trashed my XP drive (crashes right after desktop loads) which is no worry to me.
my worry is every time i try to boot into windows 7, i recieve the "BOOTMGR IS MISSING - CNTRL ALT DLT TO RESTART" error.
i have tried a bunch of things like attempting to move the bootmgr file from the XP drive to the windows one, and trying to create the bootmgr on the Windows 7 drive, but no luck.
so my question is how can i get windows 7 to boot indepentantly from my messed up XP drive, casue the boot files are on the xp one.
I installed a retail version of W 7 on a Fujitsu which broke 6 months ago and cannot be restarted. Now I cannot activate the installation on my replacement computer and the support is less than useful, always referring back to an automated system. I transferred the HD from the old computer to the new but cannot see a way to uninstall the windows 7 from that disc. Trying help by telephone was impossible because of excruciating bad connection.
Wifes Dell with XP blew up mother board and corrupted boot files. Placed drive as slave in my machine. Drive works fine, can access all needed stuff, can't boot it. I can access Favorites, Address book files from Outlook express, photos. I copied all the important things also to a seperate folder on a My book USB drive. Can I install the My book to her new computer running 7 ultimate 32 bit and just drag and drop or copy to the favorites file while in the explorer pane? She was running IE7. Also how can I put all of her address book from Outlook Express into Outlook 2010?
Yesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.For one thing, I can't log into MySQL.I can't install/uninstall any programs. - Solved.I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security CenterI can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information - Solved.or System Properties - Solved.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my taskbar shows my internet as offline even though its working and I can't open pictures - Solved.I also cannot run SFC / Scannow - Solved.or run Windows Update - Solved.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop - Solved.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it. - Solved.Edit 1: My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my firefox plugin process.