i have windows 7 ultimate 32-bit in my hp pavilion laptop. Almost 1 years ago i used the frontech tv tuner card through hp media to see worldcup 11. Afterthat whenever i gonna connect it with my lapi and open hp media, it shows no tv tuner card detected. I also downloaded all supporting software from hp official website and installed it. but the result is same.
View 2 Repliesi just bought a Lan Cable to make a network between my desktop and laptop so i can make a file transfer between them, and play games over lan
My Desktop has Windows 7 32x-Bit
My Laptop has Windows 7 64x-Bit
i plug it in both of them and i putted these IPs:
Desktop:
192.168.1.1
255.255.255.0
192.168.1.2
via TCP/Ip v4
Laptop:
192.168.1.2
255.255.255.0
192.168.1.1
they identified each other
but my laptop give me a yellow "!" mark and it can't access my desktop and didn't have a internet too..
what software i need to connect my laptop through ethernet cable
View 1 Replies View Relatedwhen i connect a rgb cable to my tv and laptop there is no sound
View 1 Replies View RelatedWhen I connect my HDMI cable to my laptop and the TV my PC screen goes black. When i take out the cable it becomes OK
View 2 Replies View RelatedConnect pc to laptop using ethernet cable 7 wants to scan laptops
View 2 Replies View RelatedCan I connect a data cable from a laptop to desktop with more memory and transfer information from laptop to desktop.
View 1 Replies View RelatedI have a large screen TV that I need to run PowerPoint presentations on, and maybe video. The IT department set up Cat5 from the PC to the TV, but I cannot get anything from the PC to display.
I am trying this on two different computers. One is XP Pro, and the other is Windows 7 Pro. I would prefer the XP machine, but will sacrifice the Windows 7 machine to this if I have to.
Both the PC and the TV show connectivity at the ports, but there is no display on the TV. Multiple Monitors do NOT show in either machine.
I have Windows 7 Pro (RTM) installed on a DELL Precision M65 laptop.
My LAN interface reports "Cable unplugged" although the cable is inserted and working.
I have no network connection through this interface.
the onboard NIC is a Broadcom NetXtreme 57xx Gigabit adapter and the driver reports it is working correctly.
If i try to install the latest driver from Broadcom, Windows says I already have the latest driver installed!
Any Suggestions?
I want to setup my IP Camera, and of course I need to do it via ethernet cable. So, when I put the IP e.g. "192.168.1.102", my Laptop doesn't even load or kept loading.This case happens when I'm using Win 7 Home Basic, but with a Win XP laptop works great.
View 2 Replies View Relatedmy system cannot detect camera through firewire
View 1 Replies View RelatedI am not sure this thread is already created or not but I have Windows 7 in my HP g60-550CA Model. I am not able to connect my PC to TV with VGA to S-Video Cable.
When I attach my cable my pc doesn't detect in my PC
New computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedI recently reinstalled windows and on a new hard drive and now it says my ethernet controller needs to be update. Without it i cannot use the internet without connecting to wifi, how do i update it?
View 1 Replies View Relatedi want to connect 2 pc using crossover cableplease give me a guide to how to do thatmy main point is gaming but also sharingi want to know how to connect them to be able to play multiplayer games using lan
View 3 Replies View RelatedMy problem is i cannot connect my laptop using wireless network connection list. but i can if i connect through cable. i had trobleshoot da problem (router & acces point do match to wireless.)
View 2 Replies View RelatedMy windows home server has decided to stop communicating with the client machines.The connector software won't connect (reinstalling makes no difference), remote desktop times out, manually shutting down (by pressing the power button) and restarting also fails to correct the problem.I can ping the server (average response time 3ms)The Home Server machine is headless and although there is a connector the only monitor I have doesn't fit the connector.I susoect that the internal battery may have gone flat and may be the servers clock is out of sync with the client machine (but even when the server is asleep its still connected to the mains).
Someone has said that I can connect a laptop to the sever via an ethernet cable but the only instructions I can find say that I have to set the IP address on both machines to be the same - Is this correct or is there another way of connecting?
I have a Gigabyte 870-UD3 motherboard and I also have two hard drives, One is a TB and the other is 500GBs, The TB one is the primary one at the minute and I was wondering does it matter what way my hard drives are connected to the motherboard? Will one slot make it slower or faster?
View 5 Replies View RelatedI need to connect a printer via crossover cable to a Windows 7/64 laptop. The printer has a USB port, but it is defective. I created a xover cable. How do I set up this printer (HP Deskjet 6940) using the xover cable connected to the ethernet port on the laptop?I found this thread, but as the last post indicates, it lacks the details needed to do the job. Installing printer via Ethernet Cable I connected the printer to the laptop with the xover cable, ran through the printer wizard to install the HP6940 drivers as per the Windows 7 printer installation routine, but nothing will print. I tried the MS FixIt routine and still no printing. All I see is an error - printing for this printer when I open up active printers.
View 9 Replies View RelatedHow to restore my internet connection with cable for my Toshiba e205 computer running win 7
View 1 Replies View RelatedSo I bought a crossover cable just to connect two laptops. Like, a network. Mine is running on windows 7 and the other laptop is running on Vista. So I configured both laptops to be in the same workgroup (left the homegroup in Windows 7) and configured both NIC's to have an IP in the same class - one of them is 10.1.1.1 and the other one is 10.1.1.2 and subnet masks are the same 255.255.255.0. Now, I should be able to ping each of the laptops. But it pings only from Vista (10.1.1.2) to Windows 7 (10.1.1.1) and not the other way.
Network window in Windows 7 shows some computers in the different network, but in the same building, but does not show the laptop connected with the crossover cable. Network window in win vista does not show any computers. Both computers have some shared folders (for users Guest and Everyone).
I would really like to know what am I doing wrong, and how do I connect these two computers so I could easily transfer some files?
i want to transfer files, remote desktop, lan gaming....actualy lan gaming works fine without doing anything just connecting the cablebut how do i transfer files and remote desktop....what software do i need???
View 2 Replies View Relatedhow I have a computer that has Internet through wairles intrnet card that is located in the housing care now how to send it to laptop via lan card which is integrated on the computer and slobdna the laptop has a LAN card operating system is Windows XP spc 3rd
View 1 Replies View RelatedI have an hdmi to dvi 6 ft cable; how do i use this cable to connect my gateway pc nv54 to my sony bravia tv??
View 1 Replies View Relatedhow to connect a projector to a computer using a vga cable
View 1 Replies View Relatedhow to connect a projector to a computer using a vga cable
View 1 Replies View RelatedMy girlfriends parents have bought a new compaq laptop with windows 7. Connected up to the internet by cable & wireless no problem. Yesterday couldn't do either and found it nearly impossible to get into the routers settings to check them. Kept saying limited access. I've tried various things to no avail. Then I noticed that my iphone could connect to the router, so I ruled out a router problem. I brought the laptop home and it wouldn't connect to our router, so I'm presuming it's a settings problem. But now I'm stuck!
View 14 Replies View RelatedI have a LaserJetprinter with a bad USB port, and I want to connect it directly to my laptop using the ethernet port. Since there is no internet at this location, I have been using the USB port.If I connect the printer directly to my laptop what type of cable do I use (crossover?) and what kind of port settings do I use (TCP/IP?) and how do I set this up correctly?
View 4 Replies View Relatedconnect HP psc 2210 printer on HP Pavilion Slimline under Windows 7
View 4 Replies View RelatedMy laptop suddenly stopped being able to connect to the network in my house and for that obviously it doesn't have any internet. It doesn't work either by connecting a cable or trying to use the wireless, here are the detaills for each case: When I connect the cable, the laptop detects it, but doesn't detect any network, it doesn't seem to even be trying. I checked on the network adapters, and it clearly says "enabled" when connected and when disconnected it changes to "No network cable plugged in". When I try to connect to my network, it always ends up saying "Limited access", when I tried troubleshooting, it said that there may be an error with the network drivers, I tried the fix there, and then it says that there must be an error with the network adapters.
Here's what I have tried so far:
-Reinstalling the devices and drivers, when I check them in device manager, it says that both the wireless and network driver are working properly.
-I tried resetting the router.
-Tried resetting the bios of the computer to it's factory ones.
- Tried resetting IPv4 and IPV6, along with the IP/TCP using the command prompt, still no go.
When I try to ipconfig /release or ipconfig /renew, I get an error saying the next thing: "An error ocurred while releasing interface Loopback Pseudo-Interface 1: they System cannot find the file specified. The operation failed as no adapter is in the state permissible for this operation."
Here is my info when using ipconfig /all:
Host name... : Jorge -NB
Primary Dns Suffix : Empty
Node Type : Hybrid
IP Routing Enabled: No
Wins Proxy Enabled: No
Tunnel adapter teredo tunneling pseudo-interface:
Media state: Media disconnected
Connection-specific DNS suffix: empty
Description: Teredo Tunneling Pseudo-interface
Physical Adress: 00-00-00-00-00-00-00-E0
DHCP Enabled: No
Autoconfiguration enabled: Yes
What is the name of the cable that will connect into the small (male) part of this connector ? On this page they mention a Molex Adapter, when I search for Molex Adapter I don't find a female connect with a power adapter.
View 1 Replies View Related