I am using a Gparted boot CD (on my other computer) to create a new partition to install Windows 7. It has an option where you select a file system for your new partition, and I'm not entirely sure what this means.
The partition for my Windows XP installation uses a "ntfs" file system, so should I use that or leave it "unformatted"?
So after 0 signs of problems I restart the computer and get the bsod after windows loads everytime. I decided to order a new hdd and i'm going to install 7000 on it so I can download 7100 on it next week. I decided to try putting windows on a seperate partition but I have a couple questions and concerns. First, is there a way to seperate the file system (program files, documents, etc.) so that I can install into these places. Because I'd still like to have the start menu programs and also, many programs just automatically install things into my documents automatically and I don't want anything other than drivers and system files on the partition so it doesn't become fragmented. Is there any way these issues can be addressed?
View 4 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedThrough a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
View 9 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedSuddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedSo I found a post on this forum with a similar problem. I'm trying to move a file that is larger than 4GB in size from my main hard drive to an external, and getting the error message in the title. The consensus on the other post was that the hard drive must have been a FAT format, and that too fix the problem either split up the file or reformat the hard drive as NTFS.Well, by all accounts, my computer is telling me that my external hard drive is ALREADY formatted as NTFS, but I'm still getting this error. I would prefer not to split up the file, but other than that, what are my options?
View 2 Replies View Relatedi have this problem when i try to move any file to another folder or partition
View 9 Replies View RelatedIn an attempt to move my paging file from my C: Partition , due to my unfamiliararity with the process , I've now got this file on both my C: drive and the new desired Partiton.Is it OK now to simply delete this file from the C: Partition , thus leaving me with only one paging file on this other Partition ?My reason for using this process is an attempt to reduce the size of an Image File of my C: Partition .
View 9 Replies View RelatedIs it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
View 4 Replies View RelatedI have WinXP installed on C: and Windows 7 installed on D:. As you can see in the attached image, C: is marked as a system partition but in fact I'd like to delete it and leave only D: with Windows 7 on it. However I can't delete it because it says it's a system partition soooo... how do I do this? Is setting the C: as inactive in command prompt (and D: as active) enough? Or can I just merge these 2 partition into one? I tried EaseUS but it says that boot or system partitions cannot be modified/merged.
View 8 Replies View RelatedI just installed Windows 7 Ultimate 64-bit and saw that the users private and public data are still saved in the C:Users of the system partition.
So, I'm looking for a specific guide for Windows 7 that separates the system partition from the users private and public data, saved in another partition on the same disk. In addition, private data created during the creation of new accounts (including the Administrator account) must be saved directly in the other partition.
In other words, in the C:Users directory, the All Users, Default and Default User directories must only remain and its must to be fully functional.
I'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
E: Healthy, Primary Partition
D: Healthy, system, primary partition
C: healthy, boot, page file, active, crash dump, primary partition
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
I have recently installed a 64bit version of Windows 7 on my computer without removing the old one(32bit). The reason for not removing the old one was that my DVD writer broke so I had to install the 64bit version while still using the 32bit version. I borrowed a friend's memory stick, put the window 7 disc's contents on the USB. I then made it into an image and mounted it. The installation was perfectly fine, got new drivers and all, but when I tried to format(or delete) the C partition on which I have my 32bit windows installed it displayed the following error message http://puu.sh/1YRwa I then stopped the old OS from booting, but I'm stuck here. I still can not format the partition, as it's still a system partition.
View 5 Replies View RelatedI reinstalled windows 7 today, When i got to the part where i have to format my SSD it wouldn't let me so i clicked "New" Then started the install.Once installed, I go to disk management and i see "100mb EFI System Partition" Now, Before i re installed windows i had just 100mb Windows Reservered, Why do i have this EFI thing instead? When i started up my PC Before it would take about 16 seconds, Now it's around 2-3 Seconds more.why it installed this partition and can i remove it?
View 1 Replies View Relatedi have a netbook with 160gb.
Xp is pre installed on this machine.
I made a new partition of 25gb to install Windows 7 on (from a usb-stick).
The installation screen starts up oke, but when i start the install and select the 25gb partition i get the message that it's not a system partition.
So now my question, how do i make it a system partition?
http://i49.tinypic.com/2w7i9ft.png
I want to be able to safely remove the D: partition in the image linked above. I can tell that I will need to change the Z: partition into the System partition to do so, but I cannot find out how.
So basically, I decided that I would get windows 7 and get a new hard disk to install it on, as my original is getting a little on the old side.
Installing the new hard disk was smooth, as was formatting it and installing windows 7 on it. However, I foolishly forgot to unplug (C:) which is the disk with Vista on it (which is the only other OS). This of course is the system disk, and so my Windows 7 disk (M:) is now reliant upon it to boot. This means I cannot format (C:).... I tried repairing the windows 7 installation (without (C:) plugged in) using the windows 7 disk, however it just told me what I already knew, and didn't repair it.
Is there anyway I can make (M:) a system disk, and therefore format (C:)? (Preferably without having to reinstall Windows 7)
Right now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies View RelatedAbout 8 months ago, I built a computer for myself;SINGLE Hard drive, 1 T;1 Partition..Windows 7 Home Premium service pack 1..The BIOS identifies the HDD..Last week, the computer worked properly, with regular shut down.3 or 4 days later, when the PC was turned on, it booted through the Windows 7 splash screen, but the log on screen did not appear.After a spontaneous reboot, the Windows 7 repair utility informed me that the situation could not be fixed. I selected advanced options and tried 2 different restore points from about a week before the last happy event. [code]
View 10 Replies View RelatedI have installed Windows 7 on my D: drive. I have placed a NEW installation on my C: drive besides it.See the attached image.I ONLY use the W7 on the C: drive now, so I want to delete my D: partition completely (416GB).HOWEVER, I see that it is labeled: "System, Active, Primary Partition".Can I just format this drive and will my PC still boot or do I have to take particular steps?
View 3 Replies View RelatedAs far as I know Win7 introduces a new Bootmanager system.At old WinXP times the bootmanager was put into the first bootable partition on the first hard disc.This partition could contain the actual Windows XP itself in addition.From Win7 times on Bootmanager should be installed in a separate (only 100 MB small) additional primary partition.When booting the system at first this Bootmanager "meta" partition is called which in turn calls the actual Windows 7 OS partition.Ok, currently I prepared three partition on my hard disc:
- 40 GB for Win7
- 100 MB for Bootmanager
- 500 GB for data
When I installed now recently 64bit Win 7 Pro everything was put on the first 40 GB partition.The installation procedure did not ask where to put the Bootmanager. Where is it? Is Bootmanager only created/established when a SECOND OS is installed on the hard disc?
