Formatting A System Partition
Dec 1, 2009
So basically, I decided that I would get windows 7 and get a new hard disk to install it on, as my original is getting a little on the old side.
Installing the new hard disk was smooth, as was formatting it and installing windows 7 on it. However, I foolishly forgot to unplug (C:) which is the disk with Vista on it (which is the only other OS). This of course is the system disk, and so my Windows 7 disk (M:) is now reliant upon it to boot. This means I cannot format (C:).... I tried repairing the windows 7 installation (without (C:) plugged in) using the windows 7 disk, however it just told me what I already knew, and didn't repair it.
Is there anyway I can make (M:) a system disk, and therefore format (C:)? (Preferably without having to reinstall Windows 7)
View 5 Replies
ADVERTISEMENT
Oct 7, 2009
Just yesterday Windows 7 got infected with some kind of bug that cause it to lag, crashed programs and was apparently capable of piggybacking off USB sticks- as my eeePC could tell you. I've reinstalled a new copy of Windows 7 on a different partition of the same HDD but now I can't seem to format the old partition in either Windows Disk Management or EASEUS Partition Master. I checked the status of the disk and I think it might be because that partition is classed as Primary or System or something.
Does anybody have any programs or advice that can help?
View 4 Replies
View Related
Dec 14, 2012
my has one partition. can I partitioned without formatting?
View 2 Replies
View Related
Jan 21, 2012
Ive got a dell xps 8300 that came with a recovery partition on the hard drive. Its taking up about 19 gigs of space and is not needed as I use recovery software on my machine. I want to format this partition and merge it with the rest of the C: drive. How do I go about this. I have tried right clicking on the partition but the format choice is greyed out
View 9 Replies
View Related
Dec 1, 2009
So I installed XP, and can't log on to Windows 7 atm. I understand why now. However, if I just format the XP partition, will I be able to log onto Windows 7 again?
View 5 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jan 26, 2011
I'm in a bit of a pickle here. My CD drive won't allow me to boot from CDs anymore, for whatever reason. I have 2 partitions on my hard drive and I'm wondering if it's possible to format the main partition by copying the windows setup files to my secondary and then somehow running them from there, whilst wiping the main one. I really don't want to reinstall without formatting, but right now I have no other option.
View 1 Replies
View Related
Nov 15, 2012
I have a Sony Vaio with two partitions, a main one that 412 GB and another one that is 39GB. The operating system is on the main partition (412GB) but I have been having a lot of problems with it so I want to install a new Windows 7 Home Premium version.
The problem is that I do not have an external hard disk drive and cannot afford one right now. I have the Windows 7 DVD that came with the computer (Home Premium 64-bit) and I also created a USB drive off of it, and will probably be using the USB since it's much faster and smoother.
Anyway, my question is how do i install Windows 7 to the main partition (400GB one) without having to format it? I am aware that I can probably install a new version of Windows in the same partition and then the old Windows will be moved to a folder called Windows (old) but in the past I have struggled with deleting that folder and it created more problems than anything
View 2 Replies
View Related
Jan 6, 2012
I re-installed Windows 7 on a fresh partition this morning after I started experiencing some glitches. Got the new partition up and running with a fresh version of Win 7, but now I'm unable to delete / format the previous partition it was on. When I select format drive, after warning me all files will be lost, it says Windows is unable to complete the format. If I try and manually delete all the files, it tells me I need permission from "Trusted Installer" to make changes to certain folders.
View 12 Replies
View Related
May 6, 2009
I have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
View 9 Replies
View Related
Sep 5, 2011
if a partition drive is formatted by mistake how the data can be restored...
View 2 Replies
View Related
Jan 22, 2010
Would anything happen to my other partition when i format win XP to win 7 in C: drive/partition?
Okay it goes like this, I have Win XP SP3 installed with two partitions, C: and E: (<----supposed to be D: ). I intend to install Win 7 Ultimate on my computer from XP SP3 and install it in C: where the current OS is at. My question is, will my E: partition prevail still? Will the reformatting touch E:?
The reason is because there is where i want to put my backups and later migrate it.
View 6 Replies
View Related
Aug 6, 2011
I bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive
2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
View 14 Replies
View Related
Jan 18, 2013
I have laptop with with following specs; Dell N5110core i74 Gb DDR3 ram500GB Hard isk2769mb GraphicsWhen I bought,it has only single disk drive "C" with registered Window 7 HomePremium,now I want to make partitions without format
View 4 Replies
View Related
Sep 3, 2011
partition windows 7 home user without formatting the data?
View 3 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Apr 30, 2012
I noticed when I went about doing a fresh install of Windows 7 on the HDD that shipped with my laptop, and using the partitioning and formatting options included in the installation routine, that when I'd do a format, the formatting would complete very rapidly. From this, I deduce that the installation routine does not perform a low-level format.Perhaps, from this I should conclude that a low-level format is completely unnecessary. Yet, I seem to remember reading somewhere online, at some point in time (note: this might have been back in the Win'95 days) that it's better to do a low-level format; to flip all the bits to zero.
View 8 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Jun 28, 2012
Through a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
View 9 Replies
View Related
Jun 30, 2012
I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
View 9 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Jul 24, 2011
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies
View Related
Apr 10, 2012
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
Oct 19, 2011
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
View 2 Replies
View Related
Jul 2, 2010
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies
View Related
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
View Related
Jan 29, 2013
I have WinXP installed on C: and Windows 7 installed on D:. As you can see in the attached image, C: is marked as a system partition but in fact I'd like to delete it and leave only D: with Windows 7 on it. However I can't delete it because it says it's a system partition soooo... how do I do this? Is setting the C: as inactive in command prompt (and D: as active) enough? Or can I just merge these 2 partition into one? I tried EaseUS but it says that boot or system partitions cannot be modified/merged.
View 8 Replies
View Related
Dec 30, 2009
I just installed Windows 7 Ultimate 64-bit and saw that the users private and public data are still saved in the C:Users of the system partition.
So, I'm looking for a specific guide for Windows 7 that separates the system partition from the users private and public data, saved in another partition on the same disk. In addition, private data created during the creation of new accounts (including the Administrator account) must be saved directly in the other partition.
In other words, in the C:Users directory, the All Users, Default and Default User directories must only remain and its must to be fully functional.
View 9 Replies
View Related
Jan 6, 2010
I'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
E: Healthy, Primary Partition
D: Healthy, system, primary partition
C: healthy, boot, page file, active, crash dump, primary partition
View 6 Replies
View Related
Oct 26, 2010
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
View 1 Replies
View Related
