On some foolish whim I (yes, I know) made the mistake of trying to update the BIOS for my Windows 7-bearing Compaq laptop. The update failed and now whenever I simply let it boot it goes to a black screen and makes a loud beeping sound. I can operate Windows normally if I tap escape once and boot from that menu.
I have been running the preview version of IE 10, and would like to go back to IE 9. Is this possible? If so, how? I can't seem to find an obvious way...
After I install Windows 7, to go back to my original OS (Windows XP), do I have to do a complete wipe or is there a roll back feature so I don't have to wipe it clean and start fresh?
I want to take out windows 7. I really like it, but I am finding more and more conflictions with the programs and sites I use each day. Example: Windows 7 does not support Microsoft Office Live where my website is, or World of Warcraft (video card problem). Both work fine on XP. So i decided to revert back. Problem is when I boot up I have three options.
"OLDER VERSION OF WINDOWS", "WINDOWS7" AND "SYSTEM RESTORE". Now system restore and older version of windows brings me to the same page and asks me for an admin password. A password that was never set up. We never put a password on this computer. I just tried clicking enter to bypass the nonexsistant password but that didnt work. After 3 attempts it boots me.
How do I roll back?
I also have the Pavilion Slimline by HP which doesnt require a disk and key to reformat the computer, its built in.
I am tired of reinstalling Windows every time due to viruses and slow down on PC.
I read some where that there are softwares called 'disc imaging software' or something that can restore windows back to the way it was when it was installed (Freshly installed windows) .
The other day I was experiencing some issues with my ATI 4350. I updated to the new 9.2 driver when it became available and didnt have any issues. I went to play my Test Drive game and i lost the sound and also game would freeze. I decided to roll back the driver to see if it would fix the prob and BAM! I got a BSOD! very unexpected! First time I utilized the driver roll back option in Windows 7. I was wondering if this is a known issue? Anyone else experience this?
I know my hardware is in good shape so I decided to do a system restore and all seems fine now when I play Test Drive.
I want to ask if I rolled back to previous version of a device driver will this cause corruption or damage to the laptop as after I have updated to a recent version there seems to be some issues and I want to roll back?
Repair company ****ed up my PC, they changed booting sequence and switch off BIOS booting screen. Now when I want to reinstall my system (because of serious virus) my PC doesn't accept booting win DVD and I can't see any port messages. Can't acces BIOS. I tried taping 'delete' , 'F2' , 'TAB' , 'F8' non of it works. Maybe it works because when I tried taping them I couldn't see anything on screen 'no signal to monitor' and system didn't start at all. It takes 15 minutes to start system now without touching anything.It's new computer connected to plasma screen via HDMI. Whole spec is ni my profile.
It's a dell insprinon 1510...my wife's and was doing a download...BIO's when it shut itself off and now won't even come back on when I press the power button. I called Dell and they say...since my warranty expired 4 days earlier it was of couse, not covered and am wondering if it's the motherboard or something else?
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
I accidentally deleted some important files/folders which caused the whole downloaded videos/games get lost in a few minutes,i didnt even notice that it was deleting.I tried system restore but it didnt work,is there any other way to get your systems time back up for 2-3 days back?
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
I have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
i want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance i have bios ver 1.20 can i use the last bios update 1.70 ? or i have to download all the previous updates first what i mean is the update cumulative?
New system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
how do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
Just thought I would mention this as it is the second machine I have bolloxed now due to doing a bios upgrade.
A while ago I did a bios upgrade on a desktop machine and after doing it got a BSOD and windows would not boot. Had to format and do a fresh install to get over it.
This time round I did a bios upgrade on my laptop so that I could put a T9500 processor into it and got the same problem.
Bit of a pig this one though as I have 3 weeks of non backed up emails I will lose amongst other things.
It seems that if you do a bios upgrade windows 7 see's it as a different machine and just errors out without trying to load. There seems to be nothing you can do to recover from it.
Only option I have it to install another oppperating system on it and then see if I can downgrade bios. See if that will work.
Just be aware of this as not something that will show to often as not to common to have to upgrade bios. Hope this helps someone.
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
I was updating with sp1 and some other updates and when it rebooted the 2nd time it got stuck on the motherboard logo so when I tried to boot with my Window7 disk "nothing" I can not boot into my BIOS so I guess I should go down and get another motherboard? I just put in a new SSD drive and loaded my Windows from scratch a couple of days ago so I hope I haven't lost 10 hours of work?