WMPlayer 11 Vid Playback Freezes
Mar 3, 2011
I've been having a bit of an issue running HD content. Recently, I've been running many 1080p .mkv video files in Windows Media Player 11 with the help of the K-Lite codec pack. Last night though, one particular video was playing normally up until a certain point, when suddenly the video froze for a couple of seconds, followed by it speeding up to catch up with itself. All the while, the audio track continued as normal. Any reason why this may have happened? It's been stumping me all night. Is there perhaps, another, more superior media player I should be using? (Media Player Classic and VLC both gave me inferior performance, by the way)
View 2 Replies
ADVERTISEMENT
Nov 14, 2009
since I changed from Win XP to Win 7 I encounter freezing during playback of DVD's. I tested several DVD's and the problem occurs with both WMP and PowerDVD 6 as well as PowerDVD 9. The only difference between PowerDVD 6 and WMP is that the former freezes every 5 minutes for approximately 5 seconds whereas WMP freezes every 2 to 3 minutes for 10 minutes. So, the latter is useless at all.
My graphics card driver is up to date. I deactivated hardware acceleration in PowerDVD. I would be grateful for further suggestions as I would like to keep Win 7.
View 8 Replies
View Related
Jan 20, 2013
So my computer started freezing randomly during video playback and just gets stuck with the sound also looping at a millisecond interval... Anyway I can repeat this error if I play any video full screen for a long enough time period. I did some research on this problem and found that it could be the RAM OR PSU... I used memTEST see if it could possibly be my RAM, But unfortunately do not know how to interpret the errors it gives out correctly, the results are attached. Someone please tell me what I should do if my results read as errors or not.
[code]....
View 2 Replies
View Related
Jun 25, 2011
I am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.
The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.
View 7 Replies
View Related
Jan 10, 2011
let me get you caught up to speed. I have a reasonably-sized digital movie, music, and tv show collection I corral with iTunes. To date I have 145 TV shows covering almost 90GB (mixed SD and HD), 1000 songs covering 8.2GB (From 256kbps AAC to 320kbps MP3 to Apple Loss-less), and 29 movies covering about 50GB (all SD), totaling around 150GB, give or take, I didn't have a machine capable of managing my HD content effectively. I was limited on HDD space as well as processing power. I am the type of person that wants to have ALL of my audio-visual media (minus pictures) in one place. In my case, iTunes. I've decided it's time to re-encode the containers for all of my HD movies to an MPEG4-type container to allow iTunes to even acknowledge it's presence. Since the release of Handbrake 0.9.5, I've been able to encode right of the disk to a file, even mix down audio tracks to AC3, etc. etc. My point here is I have one movie, Hancock, 1080P, around 4GB with audio, encoded H.264/MPEG4 @ ~4500kbps, imports into iTunes just fine. BUT, when playing, it either plays slow (say, 80% of real time) or freezes altogether around 10 seconds in. iTunes freezes when I try to give it a file over 4GB... sort of... It acts as though it's frozen... It even freezes the window I dragged the file out of (drag and dropping into iTunes) so I can't even see my desktop. Windows isn't frozen. I can still move on with life and do other things just fine. iTunes is supposedly chugging away using one of my cores according to my task manager.
View 3 Replies
View Related
Apr 9, 2012
Periodically I check my CPU usage especially is the system seems to be slowing down.Whether it is an hour or a day, wmplayer.exe mysteriously appears and consumes a tremendous amount of CPU time. Windows Media Player is neither on my desktop nor my taskbar and I almost never use it. I prefer using VLC Media PlayerWhen I terminate the processwmplayer.exeusing the Task Manager, it stops temporarily, about 5 seconds, and then suddenly reappears and takes over the computer again by consuming most of the CPU timeThe only way I can remove it is to restart my computer.I believe the computer is free of viruses and other infections. I use Norton 360 for anti-virus and periodically perform complete scans with both Malwarebytes Anti-Malware and Super Anti-Spyware Free
View 2 Replies
View Related
Aug 5, 2012
wmplayer is built into my Windows 7-64 Pro. If I have reason to suspect that functionality issues may be due to a possible corruption of Media Player, what must I do to force an update?
View 4 Replies
View Related
Aug 17, 2011
I have Realtek sound drivers configured with my windows 7 ultimate 32 bit and music is great, but when attempting to watch video program, there's no sound and I was looking for information or configuration set up.
View 7 Replies
View Related
Jan 27, 2009
I've had issues with WMP not exiting properly and having to kill the process by hand, but this takes it to a new low. I exit, and i started to notice that firefox stopped working - frozen. I discovered that it was because the media player process was running in the background and was taking up so much processing power that firefox was lagging.I've tried ending the process, ending the process tree, disabling the WMP network service, restarting. I don't want to reinstall because i don't think it would do much good. I don't think it's a codec issue either, that usually just keeps the process running - but it doesn't make the process start up straight away again.
View 9 Replies
View Related
Jan 1, 2010
okay so I'm new to Windows 7 and this PC
- Windows 7 Home Premium 64-Bit
- Intel i7 Core, Gigabyte motherboard, 4GB of DDR3 Ram
- graphics card ATI Radeon HD 4600 Series, using DVI connection with my Samsung SyncMaster 2233SW monitor
I have downloaded and installed DviX codecs, K-Lite Codec pack and updated the latest drivers straight from ATI's website for my graphics card and system.
The problem I am having is when inserting a DVD (store bought, Region 1). I have already right clicked on my DVD Drive (D: )and changed it's Region play back to Region 1 (this was my first hurdle).
Using Windows Media Player that came with Windows 7 (11 or 12?) I attempt to play this DVD, and it says playing, but I cannot access any DVD menus, title screens or whatever. No sound or anything is happening, only a black screen. Seems to recognize it as Play-list 1 (D: ), but I can't get it to play, right click on the drive in Windows Media Player, play is grayed out. Tried using Windows Media Player Classic and DviX player as well, and I cannot get a DVD to play.
In Windows Explorer, it shows TS Video Files and TS Audio Files, as if I was burning it or something. (I don't know if this is how Windows 7 shows all DVD's)
Tried the one HD video that comes with Windows Media Player, some 30 seconds of nature, and it plays fine, so I can play video.
Oh and I popped in a music CD and it plays fine as well.
View 7 Replies
View Related
Jan 25, 2009
I get no video either in Media Center or Media Player. I do get the audio however. Right now I'm using VLC for my dvd playback. I like the zoom in Media Center though.
Anyone ever had this problem. I'm using 64-bit windows 7.
View 9 Replies
View Related
Nov 15, 2011
not using Windows DVD Maker or nero as of right now im using nero but it always loads when i boot up and there are tons of stuff thats not needed only thing i use it for is to burn data to dvds mainly avi to watch on my tv using my dvd player Windows DVD Maker takes to much of the time on the dvd only 150 min. per a dvd when i use nero im able to burn 3-4 videos to a dvd is there a way to change the time into gbs in Windows DVD Maker are is there a software that would just do the job im looking to do im going to try imgburn and see how the playback is with that
View 6 Replies
View Related
Sep 11, 2012
windows updated some keyboard drivers or something before i turned off and removed my graphics card to try sort out the heat sink. Anyway, since then my pc has been unable to detect any of the audio ports attached to the motherboard. I've tried various suggestions on other threads but none have worked hence my first post.I understand for any help ill likely need to give more information and ill happily provide such details.
View 5 Replies
View Related
Oct 12, 2012
My only way of watching my blu-rays is on my computer. I've been using PowerDVD 11 Ultra for a while without significant problems. I recently noticed, however, that it was stopping playback during movies, simply pausing and then crashing. I decided to reinstall in the hope of getting smooth playback. After doing so, I had a new problem: all blu-ray video was now very light, forcing all darks to be gray, instead. I should note that I have a Radeon 5770 card and Catalyst's video settings are disabled to allow the player to function without interference (Catalyst 12.6). Despite that, however, PDVD still just gives me gray blacks. I tried downloading TotalMedia Theater and WinDVD trial versions to find a program that works right. To my shock and horror, I have the exact same problem with them, too. What is wrong with the blu-ray playback that has caused programs to play incorrectly? I am convinced that the problem is not related to my computer. One moment, everything was fine. The next moment, everything was bugged. Please note that all other video looks perfect, whether it be DVD, video files, or online videos with my Catalyst settings applied to them.Does anyone have any ideas as to what is going on? Does Blu-Ray software actually work right on computers? I noticed that the Cyberlink forums have plenty of people talking about this same issue happening with PDVD12. Considering that I had the exact problem with the other two programs, I think this goes beyond software developers.
View 1 Replies
View Related
Oct 9, 2011
when i try and do a windows performance index in windows 7 ultimate it says it cannot rate my computer because it cant do a video playback performance test. I have a toshiba sattelite laptop.
View 3 Replies
View Related
Jun 6, 2009
I am running Windows Seven RC1 32. I also dual boot vista 32, which i do not any issues with.
The issue is I receive a blue screen after 20 or more mins of Flash video playback. I can play games for hours and have no trouble at all. Only watching shows on hulu or anywhere else. Here is the bsod information:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7100.2.0.0.256.1
Locale ID:1033
View 7 Replies
View Related
Sep 10, 2012
I recently desc covered that besides VLC on my laptop all the other video player are not able to work properly (meaning,, Windows Media Player 12, Cyberlink PowerDVD12 and WMPC are able to play only the audio, but not the video, just black screen),, BUT with VLC is no problem playing any video format!! The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now! I have the latest AMD Radeon HD video drivers installed
View 9 Replies
View Related
Nov 19, 2011
I *think* I've managed to figure out that an AMD Radeon HD 6850/70 will work for playing 3D Blu-Rays with TotalMedia Theatre 5, onto a Samsung 6000 series 3D TV with Active Shutter glasses over HDMI 1.4a.
View 2 Replies
View Related
Nov 14, 2009
in Win 7 Ultimate I insert a DVD, and the only options for playback are Windows Media Player and Real Player - with Vista, I used to have an option to play the DVD in Windows Media Center, which is what I want. Is there a way to get this option back?
View 6 Replies
View Related
Mar 17, 2009
In Media Center when playing a DVD about every 5 minutes the video will hang for a second and then go into slow motion and then catch up with the audio.
Its terribly annoying. If you know the answer, please share.
I have a HP 7680n (core 2 duo/2GB ram) with a kworld ATSC tuner and a 256MB Asus (ATI) video card using HDMI out.
View 1 Replies
View Related
May 12, 2009
OS: Windows 7 RC, 64-bit
Video Card: Intel X3100
Watching live sports in Media Center (via HDHR) is a nightmare. The audio is perfect, but the video will be slow motion for a few seconds then really fast to catch up, then slow again, etc.
I have tried the pre-release WDDM 1.1 drivers as well as the most recent Vista drivers from Intel. Both exhibit the same issue. The Vista drivers were slightly better but still difficult to watch.
I did not have this problem in Vista and regular TV shows are fine. Any advice?
View 6 Replies
View Related
Mar 29, 2012
I just bought a new Lenovo Y470. I've had it about two weeks and just recently I started noticing something odd. Everything else on the computer works perfect except for one thing. When I'm playing music from my hard drive, if there is more than one song listed in the playlist (specifically when I'm playing only one album), the media player will play a seemingly random amount of the song and then skip to another song.A couple points about this problem:-This happens in BOTH iTunes and Windows Media Player.-Sometimes it plays 20 or 30 seconds at the beginning of the song and then skips, sometimes it plays all the way through the song till about the last minute and then it skips.-In WMP it skips to the very next song.I have searched around and seen a few people on forums with this problem, and there seems to be no answers. Some even said the problem was also transferred to their iPod.
View 5 Replies
View Related
Nov 19, 2009
I have had problems with continued freezing and crashing during Avi., xvid, divx, and now problems with playback of recorded media. It occurs in Media Center, VLC, WMP, DIVX. I had this same problem with vista home 32 bit and couldn't elicit support since Windows 7 32 bit was coming out soon.
Solutions I have tried:
Reinstalling OS fresh
Latest Drivers from Nvidia 4.0.100.1190 Last upgrade
Upgrade Video card from Nvidia 8800 Onboard Video to 9400 GT card
I have turning off indexing on HD
Turning off certain services and since have reinstalled
Installed very little other than media, (Pics, music)
Please help, I shelled out over a hundred for Vista and I don't want to make the same mistake if Windows 7 is going to have the same problems.
View 2 Replies
View Related
Nov 27, 2009
Some of my .mpg videos periodically stutter during playback on 64-bit Windows 7 if played through WMP 12.0.7600.16415. If played back through VLC 1.0.3 the problem doesn't happen. Problem happens whether in full-screen or windowed mode. The stutter points are consistent and reproducible -- happens at the same place in the video each time. Doesn't happen with all mpg videos, only some.There's nothing else running on the machine. Perfmon shows almost no CPU activity on all cores, and no significant disk or network I/O.Video: EVGA GTX-275, latest nVidia 8.17.11.9562 drivers. CPU: i7-860 @ 3.78Ghz. Disk: WD Velociraptor 300GB SATA. The same mpg videos play fine on a lesser-powered XP machine (2.4Ghz Core 2 Quad Q6600) through WMP 11.0.5721.5268.
View 5 Replies
View Related
Dec 27, 2009
I have a RadioShark (Griffin Technology) that records and allows replay of AM and FM radio programs. I've successfully installed it on my new Dell Inspirion with Windows 7 and it shows up and even lets me set up programs, but I can't hear any playback. The Griffin website says to change my Audio so that the RadioShark is the default but I can't figure out how to do that. I've looked at all possible options on the control panel but nothing seems to work.
View 9 Replies
View Related
Feb 12, 2010
I'm getting no sound from my headphones. Brand new head phones plugged into front panel jack. Its set as default communication device and works fine with skype etc...
I want to watch movies with the audio going through my headphones but the sound still comes out of the laptops speakers.
I tried to set the headphones to Default playback device but it won't allow it.
View 9 Replies
View Related
Jul 1, 2011
I just finished building my first computer and everything seems to work fine. However, when I perform a WEI test I receive the error "Could not measure video playback". I made sure drivers were up to date etc. but still couldn't complete the test. The log file had a line saying "Unable to create D3D device" but games and movies on my hard drive worked fine so I decided it wasn't a big deal.Now, however I have just realized that I am unable to watch streaming flash videos online and think the two may be related. Video loads but upon playing video screen turns green and only audio plays.
View 9 Replies
View Related
Sep 16, 2011
Every time a play a CD my computer slows down. If I change tabs in my browser the song freezes (as well as my PC) and then it comes back. My CD drive, a TSSTcorp CDDVDW SH-S223C SCSI CdRom Device is almost new. I have Windows 7 with an AMD Sempron 2800+ and 3 GB of RAM.
View 8 Replies
View Related
Jan 24, 2012
The title is pretty much what i want, some kind of key to press that will change my playback devices from my speakers to my headphones and vice versa? I tried by doing a macro but that didnt work at all so can i just set a key to change it automatically?
View 1 Replies
View Related
Jan 15, 2013
So I can't seem to get my audio from the computer to playback on my bluetooth headset. I'm using ventrilo, and it doesn't allow me to select bluetooth as my output device. It seemed to pair to it alright... btw it's a motorola c305 and I'm using Windows 7 x64.
View 4 Replies
View Related
Jul 15, 2011
I recently reformatted my computer and reinstalled win 7. Before I reformatted, I had a shortcut pinned to my taskbar that opened my sound recorder and playback controls so I didnt have to go through control panel to access them. just one click on the shortcut and I could access the record and playback tabs. Unfortunately I have forgotten how I did this. I read it somewhere but I didn't make a note of it. Now every time I want to change the way I listen to sound or record sound I have to go through CP to get to them. I know I can pin the control panel to the taskbar and open the controls from there but that means 2 mouse clicks where I used to do it with just the one click. how to put these shortcuts on my taskbar.
View 1 Replies
View Related
