Bluetooth Not Allowing Playback?

Jan 15, 2013

So I can't seem to get my audio from the computer to playback on my bluetooth headset. I'm using ventrilo, and it doesn't allow me to select bluetooth as my output device. It seemed to pair to it alright... btw it's a motorola c305 and I'm using Windows 7 x64.

View 4 Replies


ADVERTISEMENT

Bluetooth Headset Won't Show Up In Playback Devices?

Dec 15, 2012

I recently bought a new Bluetooth headset. I paired it with my computer, and got everything working fine. The next day, when I resume my computer from hibernation, I find that it's not immediately working. I check the Playback Devices in Sound, and it shows up as "Disconnected". I right click, and attempt to reconnect. Nothing happens. I go to my Bluetooth Devices and remove the device. I pair it again successfully. I go back to Playback Devices, and it still won't connect, so I restart my computer completely, and it still doesn't work. I try reinstalling the driver for the headset, and it reinstalled fine, but now it won't even show up at all in Playback Devices, despite it being paired fine, and showing up in my Bluetooth Devices.

Though I don't think it matters, the headset is a Kinivo BTH220 Bluetooth Stereo Headphone, exact specifications can be found here: Amazon.com: Kinivo BTH220 Bluetooth Stereo Headphone - Supports Wireless Music Streaming and Hands-Free calling: Cell Phones & Accessories

View 1 Replies View Related

Bluetooth Streaming Sound Playback Error

Jun 1, 2009

I have recently begun using Windows 7. Previously I was using Vista Home Premium.

I have a Belkin Bluetooth adapter F8T016 and used to stream music to a bluetooth speaker.

Since installing Windows 7 I cannot stream the music. Initially my Broadcom driver would not connect to the speaker. I therefore installed the Anycom Bluetooth USB2 Vista driver as suggested in this thread:

Belkin F8T016 Mini-USB Bluetooth Dongle

Now my laptop and speaker connect properly (I can see it is connected in the bluetooth property settings and physically through the 'connected' LED on the speaker.

My problem now is that the device will not playback sound. When I try to perform the 'test' in the audio device properties I get the message "Error: Cannot perform test sound".

View 1 Replies View Related

Bluetooth Headset Pairs But Won't Connect, Not Avail As Playback Device

Dec 3, 2010

My setup:

Windows 7 64bit Prof (on a suped up PC)
Asus BT211 - BT 2.1 + EDR (full A2DP support with latest Windows 7 64bit drivers - Broadcom Bluetooth 2.1 +EDR driver version 6.3.5.430 (4/8/10)
Sony DR-BT101 Headphones - (Microsoft says they're compatible)

PROBLEM:All BT devices successfully installed and appear to be working. I can even find the A2DP device if I show all hidden devices in Device Manager. The headset pairs with no problems, Remote, Headset, Handsfree Telephony, and Audio Sink Services are available under device properties. However, non of the headphone services are available under "Playback Devices" or "Recording Devices".When I right-click on the Bluetooth system tray icon and select "Open Settings" then click on the "Audio" tab I can see all of the active services from my headset. All services show "disconnected" below them. When I right-click on a service (with the headphones on and in connectible mode - steady flashing blue) I can select "Connect" (the only place in Windows 7 I've found the connect function). When I try to connect, it shows "Connecting" for a minute or two then goes back to "Disconnected". The headset never appears to respond.SO... basically it appears everything should be working, but for some reason it isn't. I can PAIR but I can't CONNECT. I can install services but I can't actually use any of them.

I've tried everything, there must be something I'm missing. Others have said they got these headphones working with Windows 7, many have also had problems not just with these headphones, but a whole range of BT devices and connecting to Windows 7.I also have a Logitech BT MX5000 keyboard and mouse combo and they work fine.... well, when they're not lagging out or dropping out, they work fine.

View 7 Replies View Related

Windows 7 Not Allowing To Use USB

Sep 7, 2011

I had Windows 7 installed on my 64x HP PC and all was fine. But yesterday morning I got my old P4 out of the closet and decided to wipe 7 and install Windows Server 08 with my old P4 as the client running XP. Then I was offered another PC that is significantly better than this P4 so I put Win 7 back on the HP with intentions of replacing the P4 with the new AMD box.These "things" are device recognizancian. First, there are camera card readers built into the front of the HP box. They showed in "Computer". But they are not there now.Second, I have a USB HD. I store all of my data on it. When I plug it in now the computer makes those beeps as it does when it recognizes a new USB device but it won't show up in "Computer" either.

View 2 Replies View Related

Not Allowing Deletion?

Jan 12, 2013

so i reinstall my os and backed up all of my c drive and an additional hdd when i restored them on the new hdd i try to delete the old c folder and it says i dont have permission but im the only user on this computer and it will not allow me to delete this folder at all i tried to go in and allow myself full access but yet can not delete this folder can anyone give me some insight on this and a way to get rid of this restored c

View 17 Replies View Related

Allowing Program To Keep Pc Awake

Jan 2, 2012

i have a ftp server that goes to sleep after 2 minuets of inactivity, cool it will save me on my electricity bill, i send a magic packet to wake it when i need it, hears the issue, filezilla server will not keep it awake when somebody is logged into it, so when im out and about, i can wake it up, just into it with filezilla client but it then will sleep after two minuets because apparently it doesn't realize i am logged into it. how do i allow this program to keep the pc awake, i have a feeling that if there is a way then it will keep it awake forever considering the server end is always running when the PC is on, id like to set it to stay on if somebody is logged in.

View 1 Replies View Related

New Mobo Only Allowing Half Of Ram?

Nov 27, 2012

recently i bought a new mobo and CPU. now that everything is installed its telling me i have 16GB of ram installed, but only 8GB are usable.... here is my new processor, AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor here is the new mobo..ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS?G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory its the same type of ram i have now.. i'm noticing that on the mobo, unlike my old mobo, the slots are different ----alternating---- colors.. where my old board the colors were paired together.... should i be placing the ram in a certain way?

View 1 Replies View Related

Constant Request For Allowing Cookies?

Dec 24, 2011

I am using W7, home premium on 1 year old HP desktop computer.Recently, I was having trouble accessing videos from you tube, email and other sites. I had been using adobe flash player 9 and I was told to upgrade adobe flash and to get version 11. I installed version 11 but it would not play until I lowered my privacy settings from medium high to medium per instructions on Adobe. The flash player worked after that except now I am constantly getting the following message everytime I launch IE 9 and every time I go to a web site. The error message is always similar to this -"Privacy Alert The website (AZh).com has requested to save a file on your computer called a cookie. Do you want to allow?Allow or block"I am currently getting this message many times a day. No matter if I select block or allow, they keep coming back. This happens on all sites and often is unrelated to the site I am visiting.

View 3 Replies View Related

Browser Not Allowing Access To Certain Urls?

Sep 14, 2011

I have a problem in that certain urls are not allowed. Receive msg that "Internet Explorer cannot display ..."There is also a problem in a web page from letsplaychess.com in that the chess board does not display. I have un/reinstalled my AV (KIS 2012) and uninstalled IE9. Both IE8 & 9 have same problem. Other computers running Vista and XP do not have these problems.

View 1 Replies View Related

Allowing User Access To Programs

Nov 13, 2009

Okay okay, I know typical forum etiquette and hate being that new guy that just logs in to ask a simple question, but today I'm that guy. I tried searching and couldn't find an answer and something this simple should easily be found at least on Microsoft's page.

I just want to know the best way to allow programs to be accessed and/or denied access by various user accounts.

Example: I currently have Photoshop Elements installed on my computer and the only way I could find to give access to the others users (household media center) was to copy a short cut and paste it on that users desktop. Then I had to install it on each individual user account. I had to do the same for Firefox and Napster. Is there a better way to do this??

I am currently having issues with Napster running correctly and I have a feeling it's because of the way that added this to each user's account.

View 1 Replies View Related

Does Windows 7 Allowing Same Names 2 Documents Folders

Sep 21, 2009

i opened %userprofile% folder and found that there are 2 My Documents folders.Does windows 7 allowing same names now ?Both are exact same name, copy name paste to other has no effect as if they were named differently but not.This making me confused where user data is stored.Is this normal ?And why folders are being created when i removed them ? Folders like my pictures/videos/music ? i dont use media player/dont upload pictures or recording vides so WTF is up with that ?

View 5 Replies View Related

Allowing A User To Have Admin Rights On Their Own System?

Oct 6, 2011

I was kind of thrown into the issue of allowing a user to have admin rights on their own system, eg., download various programs like Firefox, Adobe stuff, and before I go in to muddle things up, I must ask how to do this.....

View 1 Replies View Related

Current Security Settings Not Allowing To Open

Oct 10, 2012

I ran Combofix without any problems and removed multiple items.I started my McAfee to run behind it this morning and it ran extremely slow.I ended up stopping it and attempted to go back to run combofix again tonight and even tried a few other downloads.I keep getting a message that my current security settings will not allow.I have already did a temporary shut down of McAfee to make sure that it was not interferring.I know that I still have atleast some sort of problem because the google search is still acting up.

View 1 Replies View Related

Windows 7 Not Allowing Client Side Web Launch?

Jul 14, 2012

Ive been having an issue for several weeks now where windows will not allow programs to launch web based items, ie: Acrobat opening links in Pdf's, Any program trying to open help tabs or 'about' pages, Loader screens for games not allowing to open website links for accounts, forums, downloads etc...At the same time I noticed my menu's in all programs also changed the manner in which they opened- they cascade to the farthest left alignment instead of classic right side orientation- this applies to the desktop right click as well.At first I ignored these as they were only annoying and I thought they would resolve themselves thru future updates- not the case.

View 1 Replies View Related

Allowing Limited Users Admin Priviliges?

Aug 15, 2012

When I am on a limited user and I try to set permissions of its folders I need to provide the admin password to proceed, why?

Now the problem with User Account Control. When I click on advanced sharing, or try to do any activity that requires admin priviliges, User Account Control window pops up, you know, that window asks for the password and it somehow blocks the desktop and anything else so I cant take a picture of it.

Anyway after I provide the admin's password, the pop up closes but the process hangs/freezes does not respond for eternity.

If it is an app, it does not run. If it is a folder, the explorer thread(is it thread?) related to that folder is not responding for eternity and it is stuck, hangs. however you want to call it.

View 8 Replies View Related

Swap File Not Allowing Drive To Sleep?

Jan 1, 2012

What do with the the swap file on my SSD. It's a new OCZ Agility 3 with updated firmware. I also have an older Crucial SSD where I'd like to implement the same strategy.I'm debating putting my swap file on the HD to get it off the SSD but I'd like the hard drives to spin down when not in use. One box will be a media center PC that will be always on and having hard drives constantly spinning seems like overkill.If I put a swap file on the HD, will that drive ever go into sleep mode? I'm guessing no. Right now, I'm leaning towards small swap file on the SSDs say (512 to 2048). It'll also be easier to deal with if I ever decided to swap out or rearrange the HDS.

View 1 Replies View Related

USB Keyboard Not Allowing Number Keys To Function?

Aug 11, 2011

keyboard keys 1, 2, 3,...0 & shift to get characters above them display wrong characters - the ALL display the same, & it's always the last other key typed...Dell inspiron 530 core 2 quad 6600. what caused this: had vista 32 bit home premium, upgraded to 7 home premium. it takes ONLY usb keyboards - tried 2 diff ones that work perfectly on my 2 other desktops. what's even more weird, go into ease of access center & put onscreen keyboard up, IT WORKS FINE! in addition, i accessed it through team viewer from my laptop, TYPES THE #'s FINE! i'm very knowledgeable with PC's as i refurb for resale - tried re-installing drivers, triple checked language & regional settings.

View 11 Replies View Related

Allowing All Users To Use Profile On Windows 7 Machine?

Sep 28, 2012

I want the pc to be set up so that all users can use the profile that is on the machine. I know how its done in xp but now windows 7

View 4 Replies View Related

Allowing Fullscreen Applications To Overlap Taskbar Under Windows 7?

Jan 30, 2012

I need to allow full screen Windows applications overlapping task bar under Windows 7. The "auto hide" is not the option due to user requirements. One possible solution is to change the code of those applications to allow them overlapping task bar, but it will imply a lot of work as we have many of them already running at customer's side. The best would be just to remove programmatically the "topmost" style of task bar window, but my code failed to do that with the error 0x00000005 "Access denied".

View 3 Replies View Related

Drives Not Allowing Disc Write - No Data Recorded

Aug 25, 2012

I have tried these discs on two computers (they're Sony DVD-RW's) and brand new, I open them and put them in the disc tray, I press "burn" and it either pretends to write on one computer and then says error after 3minutes (no data is recorded) or it doesn't detect the disc it keeps saying "Please insert a Disc"? I've tried literally everything and I doubt it could be the disc's because they're brand new. The windows fix it centre program identifies an issue but cannot fix it?

View 5 Replies View Related

Allowing A Limited User Access To An Admin Folder?

Aug 14, 2012

2. When I am on a limited user and I try to access an admin folder or directory, or run application as admin I am asked to enter the admin's password. for folders I just click on the folder and it opens a window that asks for the admin's password, for apps I click run as admin. The problem is that after I enter the password and proceed, It hangs

View 2 Replies View Related

Network Stopped Allowing Printer And File Sharing

Dec 31, 2009

I have a home network (Workgroup) that includes an XP-Pro Desktop (PC1), an XP-Pro laptop (PC2), an XP-Home Netbook (PC3), a MAC Leopard laptop (MAC), and Win 7-Pro Desktop (PC4). The network also includes a NAS, a TCP-IP connected printer and a MAC-attached printer.

I am using a Linksys WRT54GS router connected to a cable modem to connect the PC4, the MAC, the NAS, a Viewsonic VS10407 Wireless Access Point, and a Netgear RP614 ver4 router configured as a switch access point.

The PC1 and the TCP-IP printer are hard-wired to the switch access point, and PC2 and PC3 are connected via WIFI.

I had all of the computers save the netbook on a Workgroup and all computers could be seen from all except the MAC. I was able to print on either printer from every machine.

I then added several applications including Adobe Acrobat Standard, ScanSnap Manager, ScanSnap Organizer, MS Office Pro 2007, Thunderbird Mail, etc. and I added any number of Windows updates, Norton Internet Security updates, etc.

I also installed a Fujitsu ScanSnap S1500 Document scanner and I setup the XP-Home Netbook.

Somewhere along the way my Workgroup network went astray. I can still print on both printers from each computer but I cannot see the various computers and I get an error message:

"Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

The list of servers for this workgroup is not currently available."

I have not been able to determine what went wrong and I am hoping to get some expert assistance here.

View 1 Replies View Related

Windows 7 Ultimate Setup At Home Allowing A VPN Connections

Feb 26, 2012

I have a windows 7 ultimate setup at home allowing a VPN connections via ptppp using the incoming setup.I set up the Client which is my iPad 2 and the connection goes through fine authenticating and then connected internally within the network and externally outside the network. Everything seems work prefectly.The client(iPad 2) loses internet browsing capability if I turn On the option to send all traffic however if the send all traffic is off then everything works fine. It's only my assumption that the reason why the internet works when the send all traffic is Off via my iPad 2 to the windows 7 machine is because it created a split tunnel which allows me to use the Internet without problems.My goal is to be able to turn On Send All traffic and it works. Having all data passthrough the windows machine

View 2 Replies View Related

Outlook 2010 Not Allowing Links To Files On Internal Network

Mar 8, 2012

I'm the net admin for a small network. One of my users has a problem that has just started today, apparently. When emailed a link to a file on the internal network, from another user on this same network, clicking on the link simply gives an error about it not being allowed. (This operation has been cancelled due to restrictions in effect on this computer. contact your system administrator.)

All users are admins on their own local boxes. This user could perform this function prior to today. There is no problem with the structure of the link, nor with security for the file in question. (I first verified that the user has access to the file, and he does, he can navigate via Windows Explorer to the location, open the file, even has write access to that location)

Even when creating an email, and not using a masked link, but a full UNC path, the 'Crtl click' to go to the location results in the same error.

I tried removing spaces from the file name, same error. I tried typing out a link to a share (not a file), one that has no spaces and I know he has access to, same error.

This represents a significant problem. My users need to be able to send links to internal locations and files, and not attachments (for multiple reasons).

View 6 Replies View Related

How To Change The Screen Resolution In Windows 7 When It Is Not Allowing To Change

Oct 3, 2011

i'm not able to change the resolutions in win 7

View 1 Replies View Related

Bluetooth Driver For Acer Aspire 5253-BZ661 But No Bluetooth Hardware?

Jun 2, 2011

Does anyone knows whether the Acer Aspire 5253-BZ661 laptop has a built-in bluetooth device in it? Reading from articles on the internet, I don't see any information regarding this laptop's particular model having a built-in bluetooth device in it but has a bluetooth driver and suite ready for the download at the acer main site.

View 6 Replies View Related

DVD Playback

Jan 1, 2010

okay so I'm new to Windows 7 and this PC

- Windows 7 Home Premium 64-Bit

- Intel i7 Core, Gigabyte motherboard, 4GB of DDR3 Ram

- graphics card ATI Radeon HD 4600 Series, using DVI connection with my Samsung SyncMaster 2233SW monitor


I have downloaded and installed DviX codecs, K-Lite Codec pack and updated the latest drivers straight from ATI's website for my graphics card and system.


The problem I am having is when inserting a DVD (store bought, Region 1). I have already right clicked on my DVD Drive (D: )and changed it's Region play back to Region 1 (this was my first hurdle).


Using Windows Media Player that came with Windows 7 (11 or 12?) I attempt to play this DVD, and it says playing, but I cannot access any DVD menus, title screens or whatever. No sound or anything is happening, only a black screen. Seems to recognize it as Play-list 1 (D: ), but I can't get it to play, right click on the drive in Windows Media Player, play is grayed out. Tried using Windows Media Player Classic and DviX player as well, and I cannot get a DVD to play.

In Windows Explorer, it shows TS Video Files and TS Audio Files, as if I was burning it or something. (I don't know if this is how Windows 7 shows all DVD's)

Tried the one HD video that comes with Windows Media Player, some 30 seconds of nature, and it plays fine, so I can play video.

Oh and I popped in a music CD and it plays fine as well.

View 7 Replies View Related

No Video On Dvd Playback

Jan 25, 2009

I get no video either in Media Center or Media Player. I do get the audio however. Right now I'm using VLC for my dvd playback. I like the zoom in Media Center though.

Anyone ever had this problem. I'm using 64-bit windows 7.

View 9 Replies View Related

Burn Avi For Dvd Playback?

Nov 15, 2011

not using Windows DVD Maker or nero as of right now im using nero but it always loads when i boot up and there are tons of stuff thats not needed only thing i use it for is to burn data to dvds mainly avi to watch on my tv using my dvd player Windows DVD Maker takes to much of the time on the dvd only 150 min. per a dvd when i use nero im able to burn 3-4 videos to a dvd is there a way to change the time into gbs in Windows DVD Maker are is there a software that would just do the job im looking to do im going to try imgburn and see how the playback is with that

View 6 Replies View Related

DVD Playback Freezes

Nov 14, 2009

since I changed from Win XP to Win 7 I encounter freezing during playback of DVD's. I tested several DVD's and the problem occurs with both WMP and PowerDVD 6 as well as PowerDVD 9. The only difference between PowerDVD 6 and WMP is that the former freezes every 5 minutes for approximately 5 seconds whereas WMP freezes every 2 to 3 minutes for 10 minutes. So, the latter is useless at all.

My graphics card driver is up to date. I deactivated hardware acceleration in PowerDVD. I would be grateful for further suggestions as I would like to keep Win 7.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved