Utility To Map Mouse Buttons?
Dec 7, 2011
I have the original WoW MMO Gaming Mouse, and used it in OSX. A handy utility called USB Overdrive lets me map all of the mouse's buttons (there are like 11) to keys on the keyboard.I tried using the mouse's native Windows software to do the same in Windows 7, but find no option to map mouse buttons to keys. So I'm looking for something simple that mimics what USB Overdrive can do.I tried a utility called X-Mouse, but it doesn't recognize all the mouse buttons.Are there any other utilities I could look at?
View 6 Replies
ADVERTISEMENT
Oct 25, 2009
Ok, i have windows virtual PC with xp installed inside of it. I use it for work. works great no complaints. Except I had to disable Integration features in order for it to allow my Secure VPN to connect. Now my 4th and 5th mouse buttons do not work. Is there a way to make them work w/o enabling my integrated features OR is there a way to make my secure VPN work without having to disable integrated features?
View 5 Replies
View Related
Dec 16, 2009
When I assign one of the mouse buttons to "Close" or to a keystroke combination (Ctrl-F4, Alt-F4, Ctrl-W etc.), after using the mouse buttons the Ctrl (or Alt) key behaves erratically as if it were stuck on the keyboard.
This is not a hardware fault of the keyboard, I tried different types and makes. I have Vista64 but I read on various forums people have this on Win7 as well, both 32 and 64. Worst of all it happens both with Microsoft Explorer (MiniMouse in my case) with Intellipoint and Logitech VX Revoution and their Setpoint. (Newest versions were installed). Other people report it with further mice.
Nothing is turned on regarding Accessibility and Sticky keys. As to date I found no evasion to this frustrating issue except not assigning mouse buttons the way I want. Is there some merciful soul out here who will share a solution ? Logitech know of this but their newer versions did not solve this, same goes for MS.
View 2 Replies
View Related
Jan 4, 2012
I have a five button mouse that I use with Autocad. Two of the buttons were programmed to toggle the snap mode, and toggle the ortho mode. (F3 and F8 buttons on the keyboard). Both buttons are absolutely necessary to those who use Autocad. These two buttons don't work in Windows 7 64. They did work previously under Win xp 32.Is there a way to program the buttons in Autocad? If I upgrade to Win 7 Pro 64, and run autocad in the Win xp virtual mode, do you think the two mouse buttons will function as they did before I switched to Win 764?
View 10 Replies
View Related
Sep 7, 2012
Logitech Performance Mouse MX, extra buttons for previous / next page. Since yesterday evening these buttons are useless, instead of bringing me to next or previous page they both cause browser to jump two pages.An example: I open Seven Forums home page, click News, click first thread in News. After reading it I press back button which should bring me back to News main page but instead browser jumps two pages back to SF home page. Same action when Forward / Next button is pressed, browser jumps two pages forward.All browsers, all sites. Logitech Setpoint drivers uninstalled and reinstalled, laptop rebooted. Issue remains
View 5 Replies
View Related
Nov 5, 2011
having migrated from XP to W7 (never experienced Vista). Quite frequently I encounter a problem with the mouse, in which it fails to (a) bring the auto-hidden taskbar into view, and (b) properly select functions normally controlled by button clicks. Problem arises once or twice a day on average.As background info, the computer is in use pretty well all day everyday, mainly for work. I work freelance at home as an electronic designer. Being technical, I understand computers to a fair degree, from both hardware and software PoV, though I don't design things that work directly in conjunction with computers. I'm mainly concerned with embedded systems, both hardware and low-level software, and I don't write programs for running on computers (programming skill is confined to assembly language and embedded C).As a typical example, I suddenly find I can't bring the taskbar into view by moving the mouse cursor to the bottom of the screen, in order to switch from a Word document I've been working on to find another document in Windows Explorer. So I use Alt-tab to switch to Explorer. But if I now open a new document (eg a pdf), I then have to use Alt-tab to return to the Word document.However usually that isn't all that goes wrong, as I now find that clicking on something in the word document toolbar (eg to go from 'Home' tab in MS Word to the 'Insert' tab) doesn't work. All that happens is that Word goes out of keyboard 'focus' - the blue background to the toolbar goes grey, and I can't type anything. I then have to use Alt-tab to re-select MS Word (cycling through all the open windows) to bring MS Word back into focus. Since I can't use the mouse for selecting, I have to press Alt, then tab or arrow key to step through all the toolbar buttons and options till the one I want is selected, then press Enter on the keyboard. In other words, I'm reduced to keyboard-only mode.
Sometimes I can get out of this situation by closing one or more windows I don't currently need (by Alt-tabbing to bring up a window, then pressing Alt-F4 to close it). In extreme cases this won't cure the problem, and it remains in keyboard-only mode even with only one application open. The only thing I can do then is to close everything, switch off and reboot - even Restart is not enough, I actually have to switch off and on again.Has anyone else observed this behaviour with W7 or is it just my computer? I don't think it's a problem with the mouse itself: the cursor always moves around the screen normally, and I do get a response by clicking on a button. It's just that the response is wrong, it simply takes the whole application window out of focus so clicking no longer does anything in that window.
View 1 Replies
View Related
Jan 25, 2012
my Synaptics touchpad mouse has had a mind of its own. It has been clicking and opening files without me pressing the mouse buttons or tapping the touchpad,scrolling by itself, highlighting and moving the files on my desktop and in my computer, etc.I have tried everything from physically cleaning the Touchpad thoroughly, updating the Synaptics driver time and time again only to find no resolution to this issue, I have also uninstalled and reinstalled previous versions of the synaptics drivers that worked before with my laptop only to be confronted with this same problem.I have ran scans on both Uni-blue registry booster and PC Tools Spyware Doctor (which I use as my registry and anti-virus/spyware programs) and of which I update on a daily/weekly basis and yet I have found no traces of what may be causing my mouse to act so crazy.I have also ran the system scan in the command prompt which was suggested earlier in this thread only to find out that everything was running properly and at 100% integrity.
I have an HP dv7-3065dx Entertainment Notebook [pavilion dv7 is the product name on the back] that I purchased from Best buy in 2010. I am running Windows 7 Home Premium 64-bit that was pre-installed onto my laptop. I have been pretty thorough on keeping all of my Microsoft and HP drivers up to date and have only began to experience this problem with my touchpad earlier this month. As far as the programs that I use on a daily basis; I mostly use Mozilla Firefox as a web browser and Microsoft Word for my schoolwork and the GOM media player for watching videos. None of which I have been able to do properly since this issue established itself onto my computer.
View 6 Replies
View Related
Aug 18, 2009
I'm trying to be a good Windows 7 citizen and give the built in backup chance instead of installing Acronis or Macrium or the sort.
I'm running this on my Dell D830 laptop with a 500gb internal drive in it which only has about 130gb used. I'm trying to run the back to a 250gb internal drive in the drive bay.
It fails every time with the error that there is not enough disk space to back up.
I also tried backing this up to an external 750GB drive but I received the same error.
Any ideas?
View 1 Replies
View Related
Mar 3, 2011
I was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.
View 14 Replies
View Related
Sep 24, 2011
After my last near disaster I need to get off my butt and backup this pc. I was using Acronis but the earlier version of it was a lot easier. I don't know if I need to backup sector by sector and that's what I didn't understand.Is there something that will work the same and would work on boot up, either starting with a separate disk or with the boot up option on the backup disk?
View 7 Replies
View Related
Mar 6, 2012
Changed a motherboard on a desktop, while in BIOS, I was not allowed to change the Service tag. The Cx's Driver & Utility Disk was unreadable by the system.know if there is a downloadable program, I can put a flash drive to make part of my tech tool bag?
View 2 Replies
View Related
Sep 8, 2009
i'm having a problem with Win 7 (x64), i can't install the driver utility for my remote controller. Win 7 does recognize the usb receiver as ASUS DH REMOTE, but when i install driver from Vista x64 the setup fails to install acpi driver (i need the program to configure the device ). i've tried run as administrator and same happens. so if anyone has some exp. about it.
My MB ( Asus P5W DH DELUXE )
View 2 Replies
View Related
Jun 10, 2011
I want to make triple sure that a certain drive is good.What's the best utility to use to confirm or otherwise...??My baseline assumption is to pull the mftr's own bootable utility disc and use that.
View 6 Replies
View Related
Oct 27, 2011
I saw several of threads saying that, updating your BIOS in the Asus P8Z68-V PRO, would stabilize your system and have better effectivity and such things. If you direct to this page (Link), and scroll down a little, choose Windows 7 64-bit (as it's my system), and click + on the BIOS utility. Would it be the best idea? Is there any danger in doing it?
View 6 Replies
View Related
Jun 10, 2012
I have Win 7 Ultimate. I recently bought a usb turbotenna to catch wifi. It worked fine with the Ralink software. Ralink worked in conjunction with wzc as I set it up that way while installing the software. After a few days, I had what I thought was trouble so I uninstalled the Ralink software. I then plugged in the usb adapter and let windows load it's own drivers. Few days after that, I reinstalled the Ralink software and opted to "Use wzc as configuration utility" instead of using Ralink's. Ever since then, while I can still see and log on to networks using windows, the Ralink utility now shows NO networks. It now shows, "NIC or driver not ready". After several uninstall/reinstall, Windows will not relinquish it's primary control. I want to go back to Ralink showing networks and letting me connect through it's site survey.
Would uninstalling the Broadcom wireless connection be the solution? How do I get it to once again be secondary?
View 1 Replies
View Related
Apr 23, 2009
Along with the two new Phenom processors, Advanced Micro Devices today releases an updated version of its Overdrive software. Ready to use with Microsoft® Windows® 7
View 1 Replies
View Related
Aug 31, 2010
I just installed a AMD Phenom II x4 925 processor. I have Speedfan 4.40, is that good enough? I have it on a Arctic Silver 5 with an Arctic Cooling Freezer 64 Pro 92mm heat sink and I want to monitor the temperatures as I run Prim95.
View 4 Replies
View Related
Apr 1, 2010
The Windows 7 Backup Utility is vastly improved compared to both the Windows Vista and Windows XP backup utilities. The tutorials below will show you how to use this great new version of the Windows Backup Utility.
View 0 Replies
View Related
Oct 15, 2012
I use robocopy for copying files and directories. It marks all the new destination folders with the timestamp of the date the copy was done, so I lose the original timestamp. I use it in a batch so that I can create logs. I'm familiar with XCOPY but it doesn't suffice for what I need. Is there a good utility that can copy sets of files & or folders as in a batch file for frequent copy, or even a windows app?
View 5 Replies
View Related
Apr 9, 2012
I am seeing a utility that will let me enter the command that I use in XP and then tell me what the corresponding comand or sequence of comands are in Windows 7. What I am finding is I am spending many hours locating the correct set of sequences to do something which is very straightforward in XP and do the same thing in Windows 7. I end up going onto the web and have to search for the command and the information necessary to accomplish a task. An example of this is creating an ODBC connection. In XP it exists as an option in the Control Panel/Administrative Tools/Data SOurces ODBC. In Windows 7 now its buried in Windows System32/odbcad32. I am not seeing any real advantage of using Windows 7 other than running in 64bit mode. It seems that the order of where things/commands are located and what commands are called is many times changed as well.
View 2 Replies
View Related
Apr 25, 2012
For some reason my LifeFrame program is no longer available. Any reliable website to download the program from? I tried looking on the ASUS website but.. no luck. And there is another website that comes up when I search in Google, but it looks suspicious.
View 1 Replies
View Related
Jan 26, 2012
I had Acronis 2011 on my system but removed it. Since then it seems I am unable to use the windows backup utility in any way.. I click on it and nothing..I can do restore etc.My VSS is automatic and started?
View 5 Replies
View Related
Feb 10, 2011
When I ran the Windows Installer Cleanup Utility, 2 items were there I didn't recognize.
1.(All Users) Shasta [7.01.0000.0001]
2. (All Users) SFR [7.01.0000.0003]
bTW I ran the utility to get rid of Macrovision and Cyberlink malware.
View 5 Replies
View Related
Nov 24, 2010
I am using The Easy Transfer utility to make copies of the files I want to keep once I have installed Windows 7 on my WinXP PC and I will be making the file on an internal hard disk drive, which is E: As the My Documents folder has been directed to my D: drive and WinXP is installed on my C: drive, do I have to include My Documents in Easy Transfer or will the clean install onto C: leave my D: and E: drives intact?
View 9 Replies
View Related
Aug 13, 2012
Pavilion dv5 utility drivers windows 7
View 1 Replies
View Related
Aug 27, 2012
I reinstall windows on PB TS44HR. I found almost all drivers, but i couldn't find hotkey driver for this notebook ( windows 7 Ultimate x64). where i can find it? or what's the name of this driver?
View 2 Replies
View Related
Dec 18, 2012
Sound drivers for windows 7 utility?
View 2 Replies
View Related
Apr 27, 2012
New Laptop. Win7 64 ie9 has no min max or X buttons on the top right. Is this a new feature... Checked options, can`t download ie9 as my version is newer. ie8 not compatible. Should I remove ie9, then how can I access the net to reload
View 1 Replies
View Related
Jun 30, 2011
Does anybody know of a utility program like Windirstat that runs in Windows 7 environment?
View 2 Replies
View Related
Nov 11, 2009
I recieved my Sony Vaio Windows 7 disks today, put the first one in and it started doing some install thing for supplement disk (said 1/12) but then froze for ages, so I tried closing it. When I attempted to start the installation again, I now receive this error:"The supplement disk utility has stopped and cannot continue because the main C: drive partition information is not avaliable. Restore your computer to the original factory settings and try using the supplement disk utility again."
View 9 Replies
View Related
Jan 3, 2011
I have chinese crap motherboard that its manufacturers customer service is only one person and gave me 700kb rom file through chat in a very long 2 hours.My problem is I can't find appropriate flashing utility for my bios file (.rom). Please don't mind contacting customer service again. I am very disappointed about it.I have tried russian utility uniflash 1.47 re 09, one ami flashing exe program and one ami flashing .com (ms dos) program. [code]
View 2 Replies
View Related