I use robocopy for copying files and directories. It marks all the new destination folders with the timestamp of the date the copy was done, so I lose the original timestamp. I use it in a batch so that I can create logs. I'm familiar with XCOPY but it doesn't suffice for what I need. Is there a good utility that can copy sets of files & or folders as in a batch file for frequent copy, or even a windows app?
View 5 Replies
which software is needed to copy video from DCR-HC36
View 1 Replies View RelatedOur office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies View RelatedThe application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies View RelatedI tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies View RelatedAnd now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies View RelatedI was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
View 9 Replies View RelatedI have one internal drive with 1 TB. The data there is very important to me , so I bought External removable drive for backup. Now, I want to copy the data from one drive to the second drive but I have to be sure I have a perfect copy of the data. The data is mostly songs movies and documents. I'm using windows 7.
My question is this:
1.If I'll transfer the data through windows 7 by copy and paste, I could be sure i have a perfect copy? 2.There are tools for comparison Between the original data to the data that was copied?
I'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies View RelatedI'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies View RelatedWhat is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies View RelatedI'm trying to be a good Windows 7 citizen and give the built in backup chance instead of installing Acronis or Macrium or the sort.
I'm running this on my Dell D830 laptop with a 500gb internal drive in it which only has about 130gb used. I'm trying to run the back to a 250gb internal drive in the drive bay.
It fails every time with the error that there is not enough disk space to back up.
I also tried backing this up to an external 750GB drive but I received the same error.
Any ideas?
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
I have installed windows 7 evaluation copy build 7201 and i want to find out if i will be able to upgrade it to the original copy and how? Any suggestions?
View 3 Replies View RelatedI was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.
View 14 Replies View RelatedAfter my last near disaster I need to get off my butt and backup this pc. I was using Acronis but the earlier version of it was a lot easier. I don't know if I need to backup sector by sector and that's what I didn't understand.Is there something that will work the same and would work on boot up, either starting with a separate disk or with the boot up option on the backup disk?
View 7 Replies View RelatedChanged a motherboard on a desktop, while in BIOS, I was not allowed to change the Service tag. The Cx's Driver & Utility Disk was unreadable by the system.know if there is a downloadable program, I can put a flash drive to make part of my tech tool bag?
View 2 Replies View Relatedi'm having a problem with Win 7 (x64), i can't install the driver utility for my remote controller. Win 7 does recognize the usb receiver as ASUS DH REMOTE, but when i install driver from Vista x64 the setup fails to install acpi driver (i need the program to configure the device ). i've tried run as administrator and same happens. so if anyone has some exp. about it.
My MB ( Asus P5W DH DELUXE )
I want to make triple sure that a certain drive is good.What's the best utility to use to confirm or otherwise...??My baseline assumption is to pull the mftr's own bootable utility disc and use that.
View 6 Replies View RelatedI saw several of threads saying that, updating your BIOS in the Asus P8Z68-V PRO, would stabilize your system and have better effectivity and such things. If you direct to this page (Link), and scroll down a little, choose Windows 7 64-bit (as it's my system), and click + on the BIOS utility. Would it be the best idea? Is there any danger in doing it?
View 6 Replies View RelatedI have Win 7 Ultimate. I recently bought a usb turbotenna to catch wifi. It worked fine with the Ralink software. Ralink worked in conjunction with wzc as I set it up that way while installing the software. After a few days, I had what I thought was trouble so I uninstalled the Ralink software. I then plugged in the usb adapter and let windows load it's own drivers. Few days after that, I reinstalled the Ralink software and opted to "Use wzc as configuration utility" instead of using Ralink's. Ever since then, while I can still see and log on to networks using windows, the Ralink utility now shows NO networks. It now shows, "NIC or driver not ready". After several uninstall/reinstall, Windows will not relinquish it's primary control. I want to go back to Ralink showing networks and letting me connect through it's site survey.
Would uninstalling the Broadcom wireless connection be the solution? How do I get it to once again be secondary?
Along with the two new Phenom processors, Advanced Micro Devices today releases an updated version of its Overdrive software. Ready to use with Microsoft® Windows® 7
View 1 Replies View RelatedI just installed a AMD Phenom II x4 925 processor. I have Speedfan 4.40, is that good enough? I have it on a Arctic Silver 5 with an Arctic Cooling Freezer 64 Pro 92mm heat sink and I want to monitor the temperatures as I run Prim95.
View 4 Replies View RelatedI have the original WoW MMO Gaming Mouse, and used it in OSX. A handy utility called USB Overdrive lets me map all of the mouse's buttons (there are like 11) to keys on the keyboard.I tried using the mouse's native Windows software to do the same in Windows 7, but find no option to map mouse buttons to keys. So I'm looking for something simple that mimics what USB Overdrive can do.I tried a utility called X-Mouse, but it doesn't recognize all the mouse buttons.Are there any other utilities I could look at?
View 6 Replies View RelatedThe Windows 7 Backup Utility is vastly improved compared to both the Windows Vista and Windows XP backup utilities. The tutorials below will show you how to use this great new version of the Windows Backup Utility.
View 0 Replies View RelatedI've installed windows seven just before Christmas,and it served me well till middle of February,when "I had to explore it a bit more".And of course,I have deleted something and there was no way to boot win 7 up again.It booted correctly,but after"starting windowws" everything stopped.I tried to fix it,but no,and even worse,I was kind of short with space on C partition(cos me idiot,of course,made it just 30 gigs),and have turned off system restore.
Just for the record how smart I am,I made win 7(beta OS ?!?) my primary and only OS.
I had to save my files and didn't reformat C partition right away cos I planned to reformat it after I take the ownership and back up my documents.
So,I have installed windows seven again on E partition,which is now,after reassaining letters,C partition.And literally,now I'm having dual boot,both windows seven,one is working and one not.I have backed up my files a long time ago from now,but still didn't format that partition,and today I decided to do it.
And here is what I don't know.
When I created my C partition for Windows 7 first time,I got an extra 200Mb partition,but when I've installed Windows 7 second time on that "E"partition,I didn't have to make that 200Mb extra partition.
And now I wonder should I merge that 200Mbs with another partition and format them together,or do I have to leave it where it is?
I'm not sure,and I don't even know if another win 7 installation is using that 200Mb partition or not?
What should I do?
And one more thing,I have deleted windows folder from ex "C" partition couple weeks ago.
I have just done a clean install from vista to win 7 using a upgrade version of win 7 hp, following the tutorial off this site, but when doing the install it didn't ask me for the product key or if i wanted to activate win 7, any one else had this happen, do i need to do anything. When i look at system page it shows a product key that doesn't match the one in the box & there is a button that asks if i want to change the product key, it also states i have 30 days to activate win 7.
View 7 Replies View RelatedI am seeing a utility that will let me enter the command that I use in XP and then tell me what the corresponding comand or sequence of comands are in Windows 7. What I am finding is I am spending many hours locating the correct set of sequences to do something which is very straightforward in XP and do the same thing in Windows 7. I end up going onto the web and have to search for the command and the information necessary to accomplish a task. An example of this is creating an ODBC connection. In XP it exists as an option in the Control Panel/Administrative Tools/Data SOurces ODBC. In Windows 7 now its buried in Windows System32/odbcad32. I am not seeing any real advantage of using Windows 7 other than running in 64bit mode. It seems that the order of where things/commands are located and what commands are called is many times changed as well.
View 2 Replies View RelatedFor some reason my LifeFrame program is no longer available. Any reliable website to download the program from? I tried looking on the ASUS website but.. no luck. And there is another website that comes up when I search in Google, but it looks suspicious.
View 1 Replies View Related
