I am trying to run windows7 upgrade advisor on a four year old hp laptop dv5250us and keep getting ran into unexpected error please reinstall and try again but keep get same error no matter what I do.
View 6 RepliesRunning XP Pro, i7 920 , 4 gig of memory, Gig MB, GTX 9800 Video, Lan Cable connection with remote connection for printer only = going to upgrade to Win 7, however, I can't run Win 7 Advisor - after download on Windows site, I try to run and it says I am not connected to Internet.
Could it be my router is outdated for Win7?
Any suggestions = Thanks for the assist!
Anyone shed any light on why Windows7 UpgradeAdvisor.exe wont run, when I click RUN - nothing happens. PC using Vista Home Premium 32 bit.
View 9 Replies View RelatedI've downloaded and installed the advisor, but it won't start. And no error message at all. The privacy link works though.
My PC is an Acer 8920G - a year old. .NET 3.5sp1 plus all other MS updates. OS is Vista Home Premium.
Have rebooted, reinstalled, downloaded again - no different. Also checked the Event log - nothing other than saying the install was successful.
The animation for the Start check button works. Then nothing.
Any ideas?
Anyone cast any light on why I have problems running W7UA on both my laptop and desktop running Vista 32 bit?
It worked fine on an older PC running XP pro after downloading microsoft NET thingy!
The three are all networked together - has that anything to do with it?
I click the setup.exe it asks if I want to run and I click Run and nothing!!
Microsoft released the final version of Windows 7 Upgrade Advisor today. This is a essential utility that can help you prepare for a smooth upgrade to Windows 7. Brief Description
Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, and installed programs for known compatibility issues, gives you guidance on how to resolve potential issues found, and recommends what to do before you upgrade.
Overview:-
Before you begin: Be sure to plug in and turn on any USB devices or other devices, such as printers, external hard disks, and scanners, that you regularly use with the PC you're checking.
The Windows 7 Upgrade Advisor scans your PC for potential compatibility issues and lets you know about your Windows 7 upgrade options. Within minutes, you'll get a report that tells you if your PC meets the system requirements, if any known compatibility issues with your hardware, devices, and installed programs are found, and gives guidance on what to do to before installing Windows 7 on your PC.
You can download it here:-
http://www.microsoft.com/downloads/details.aspx?FamilyID=1b544e90-7659-4bd9-9e51-2497c146af15&displayLang=en
How to Use Windows 7 Upgrade Advisor ?
View 0 Replies View RelatedOk, I'm wanting to go from Vista 32-bit to 7 64-bit. I ran the upgrade adviser and it said my Linksys wireless adapter needed action taken. I went to linksys website, but only found the 32-bit driver, and I'm guessing that won't work on 64-bit, right? I have the WMP54G ver 4.1 if anyone can help me out.
View 1 Replies View RelatedI cannot get Windows 7 Upgrade Advisor to work on two computers running Vista Home Premium (32 bit) one a laptop and one a desktop. It ran fine on my old PC running XP pro. What could it be?
View 2 Replies View RelatedI was wondering if i should uninstall these programs. I don't use them at all and I probably won't ever use them.
View 2 Replies View Relatedi cant get Windows 7 Home Premium upgrade to show up on my grandmas computer we have call microsoft and no 1 could speak english and we couldnt understand them but they said u need to return the disc but i kno it works on mine i installed it but when i pop it in to her computer it dosnt show up and when i go to My Computer on XP.
it seems like nothings in there i hit open and it says please put a dvd in the CD rom and iv restarted the computer and tryed from there but theres no option to hit install cd and we have tryed everything i could think of even microsoft people said to do some stuff and she has a old old old dell computer it aint really ld but it aint new and i kno every other DVD or Cd works with the PC.
After following this guide, I went ahead and download the latest version of my display driver.
I've got the ATI Radeon HD 3870 just FYI.
When I opened the download and tried to install it, at about 1% of the installation my computer just immediately failed and restarted. I've tried it twice, and it's done the exact same thing both times. Is it that I don't need the upgrade or something? I've made sure to download the exact same driver as the one I have (x32 Radeon 3870).
I cannot install SP1, I keep getting error code 80073712 error. I've done the update readiness tool successfully, sfcscan with unrepairable errors, manual SP1 install. Nothing has worked, so I'm trying to do a inplace upgrade to hopefully replace missing/corrupted files but I get the 0x8030002F error when I start the Win7 disk.Booting from the disk results in it telling me that to do an upgrade I have to boot from Windows.
View 6 Replies View RelatedWhat happened: At the very end of installing RC Windows 7, I got a "failed to upgrade" message, and then it said my system would automatically revert back to Vista, which it did (thankfully).
I have already uninstalled Windows OneCare (virus protection). However, when Windows 7 was installing, my Spyware Doctor opened up and I had to click "yes" on it for the Spyware Doctor box to go away. Do you think that could have caused the upgrade to fail? I had turned off Spyware Doctor, but I'm thinking I should uninstall it before trying Windows 7 again. What do you all think?
I've recently upgraded my desktop from windows vista to windows 7(today in fact) and when it got done installing and my system re-booted, whenever i right clicked on any windows explorer related windows, or the desktop itself, It stopped responding and it had to restart windows explorer. I've restarted several times and even �sfc /scannow� doesn�t give anything.
View 5 Replies View RelatedProblem reports where making the rounds shortly after the final release of the Windows 7 operating system. It is not unusual that some users report problems when installing a new operating system or upgrading their old OS to a new one. Windows 7 in this regard did not get a lot of bad press except for a problem that got reported quite frequently by Windows Vista users who tried to perform an upgrade to Windows 7. These Windows Vista users were experiencing an error at exactly 62% of the update.
Windows performed an automatic rollback to Windows Vista at this point leaving the user puzzled and confused. Some users even experienced an endless reboot problem which would initiate the upgrade process again only to fail again at 62%.
Microsoft has released a Fix-It solution for the problem that the Vista to Windows 7 upgrade hangs at 62%. Fix-It solutions are one-click solutions that will correct a problem that was experienced by the user before. In this case the Vista user needs to click on the Fix-It button on the Microsoft support website after the upgrade failed at 62% to fix the issue and initiate the upgrade again.
Experienced users can also fix the problem manually by following the steps detailed at the very same support page:To resolve this problem yourself, follow these steps:
1. Restart the computer. Then, your computer will roll back to Windows Vista.
2. Click Start, right-click Computer, and then click Properties.
3. On the Advanced tab, click Environment Variables.
4. Under System variables, click New.
5. Type MIG_UPGRADE_IGNORE_PLUGINS in the Variable name field.
6. Type IphlpsvcMigPlugin.dll in the Variable value field.
7. Click OK three times to close the dialog boxes.
8. Start the upgrade installation again.
Hopefully this fix will help those that have been having issues with the upgrade process.
I got a original windows 7 ultimate CD and during the upgrade it gives below error code
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570
How do i complete to installation.
have just bought a refurbished toshiba Satelite laptop from Curry's and after a few days it starting coming up with an 'error occurred during upgrade' message. It appears several times during the day. The laptop seems to be running okay otherwise, but it is annoying when it keeps popping up. I am running windows 7.
View 13 Replies View RelatedI have 2 computers on a home network (both were running Win XP Pro). Obtained Win 7 Upgrade disk fom Microsoft and installed Win 7 on Machine 1. OK! Now trying to install Win 7 on Machine 2.
Placed disk into DVD-CD drive and drive seems to run. Start/my computer/cd drive shows disk is in drive. Right click/explore. Disk contents appear.
Disk runs but machine hangs up. Nothing happens. Placed disk in cd drive of machine 1 and it performs as it should.
I have updated the driver for disk drive. Other disks which I have tried in the cd drive seem to operate correctly.
Motherboard is a MSI MS-7309 1.0
Processor - AMD 2.60 HZ Athlon 64
Memory 4GB
CD Rom- Compaq DVD-Rom SD-M1612
I really want to install Windows 7 on this machine so both machines appear the same.
I have an Acer Aspire M5100 Desktop that was running Vista 32 bit. I tried to upgrade to Windows 7 and am now stuck. I think it is either a problem with BIOS or with an incompatible graphics driver. After the upgrade process (I did not do a clean install), when the computer rebooted for the last time, the screen went black and it it did not advance past a certain point. The error message read, cannot boot from CD.
Since then, when I turn on my computer, the screen goes to black. That's it. If I push delete, I can access BIOS. Even when the boot priority is the CD Rom, nothing happens. I cannot access a GUI to make changes to drivers, etc. With all of the known incompatibilities this computer has with Windows 7, it probably would be best to return to Vista. Ideally, without a clean install because of all the software and files on the computer. But I understand a clean install might be necessary.
How do I use my Vista recovery CD when there is no GUI accessible? Can I do this through the BIOS menu? I am not good with command prompt coding, so if that is mandatory. Unfortunately, I do not know the exact computer specs, again because there is no GUI. The best I can do is this Acer website: Acer Support: Aspire M5100 Specifications.
I have an error code 0x80070241 while trying to upgrade from xp pro to windows 7?
View 2 Replies View RelatedSince installing the latest Windows Update (Critical Update) I am unable to re-boot.The computer posts and gets to the windows screen and when about to load up into explorer I get the following error message in a Box. "The application was unable to start correctly (0xc0000022). Click OK to close the applciation. The actual application is explorer.exe. Application error. If I click on OK the screen goes blank. (Black screen) Hitting CTR ALT Del gives me the options but when hitting on Start Task Manager I receive the same error this time the applciaton being Task Manager with the same error code as above. I am able to start up in Safe Mode and have tried to both use the built in Startup Repair (which is unable to fix the problem) and also have tried to go back to a previous version via System Restore without any luck. The same errors appear each time.
View 2 Replies View RelatedI am having blue screen errors on my vista home software. It came pre installed when pc was purchased. Packard Bell sent me a Windows 7 a long while ago, but I did not install it. If I install it now, will I have to reinstall all the other programs on the pc and will it resolve the blue screen error if it is software based?
View 1 Replies View RelatedI have XP Pro64 bitand I am trying to upgrade to Win7 64 bit, While it is unwrapping files there is a point where it needs to reboot. When it does it comes up with the error saying it cant find a bootable device or something in that effect. I removed the win7 dvd and hit the restart on the computer. Install continues. It completes but when I try to put all of the data back in I cant open up my user name (Documents and Settings ) folder has a lock on it. I finally gave up and I am reinstalling XP Pro64 bit again as I type.
I will try to upgrade again.
Can anyone explain why when it reboots it wont just continue to install with the disk in the Drive?
Why there is a lock on the folder and wont let me access the files?
i downloaded windows 7 rc from microsoft yesterday and installed it on my computer as an upgrade to vista.
everything worked fine, until i tried to activate that thing, it gave me the error 80072efd, i tried many of the online things to try and fix it and yet it still gives me the error, only when i try to activate and when i try to do windows update. My key is legit, straight from microsoft.
My internet on the computer works fine.
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies View RelatedI ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies View RelatedCustomer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
I purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "