"Unable To Continue" Error When Attempting To Synchronize Time

Jul 16, 2012

I recently cleaned my computer case (took it all apart and vacuumed it out). When I plugged everything back in and tried to boot up, all of my BIOS settings had cleared and I had to re-enter/set them again. I found this odd, but maybe the CMOS battery is failing or dead. A few days later I realize my time is off by about 15 minutes (roughly, the amount of time the PC was unplugged as I was cleaning it). However, when I left click on the time in the bottom right, "Change date and time settings", select the Internet Time tab, and click on Change Settings, I get the following error:Unable to Continue You do not have permission to perform this task. Please contact your computer administrator for help.Unfortunately, I have the only account on this machine, I am the admin, and this is not a domain machine (it's a home PC). I have no clue how or why this error has come about but it's rather annoying. I went into my BIOS and manually set the time to make it accurate and hopefully fix the issue but I still get the error. To further complicate things, when I look in the list of Services, there is no Windows Time service. When I run "w32tm /config /update" from an elevated command prompt, I get the error "The specified service does not exist as an installed service."I ran an SFC /scannow check and it found/repaired a corrupt file (mfds.dll) but that doesn't sound like it's related.

View 2 Replies


ADVERTISEMENT

Getting C Program File/winzip Driver Updater/lang.ing Saying Unable To Continue

Oct 14, 2012

Geting c program file/winzip driver updater/lang.ing saying unable to continue

View 1 Replies View Related

Error When Attempting To Get WEI

Mar 18, 2009

After I upgrade installed 7057 on top of 7000, I got the following error message when attempting to have the system rated for WEI: Could not measure storage performance.

The disk cannot be accurately assessed while write caching is disabled. Before re-running the Disk assessment, check the Device Manager option to enable write caching.

I attempted to get the write caching enabled, but error message said "Windows could not change the write-caching setting for this device."

Any remedy?

View 9 Replies View Related

Receive Error Message When Attempting To Download

Feb 18, 2012

Receive error message when attempting to download

View 1 Replies View Related

Getting The Error Message Microsoft.NET Framework 2.0 Is Required To Continue

Feb 14, 2012

I have had the 5600 for about 2 years and still have not been able to use it without problems. I need to scan documents and keep getting the error message Microsoft.NET Framework 2.0 is required to continue.

View 2 Replies View Related

Keep Getting An Error Message Microsoft.NET Framework 2.0 Required To Continue

Feb 14, 2012

I am trying to scan a document on the Lexmark 5600 and keep getting an error message Microsoft.NET Framework 2.0 required to continue. I have tried to download but after several unsuccessful attempts have given up.

View 3 Replies View Related

Get An Error Code 8007371B When Attempting To Install Update

Aug 10, 2011

Get an error code 8007371B when attempting to install this update. Tried the Microsoft FIXIT in both Simple and Advanced Mode. No luck! Also tried downloading the update and installing manually with no success!

View 9 Replies View Related

Memory Management Error When Attempting To Install Windows 7 64-bit?

Jun 3, 2010

I am trying to use all the 4 GB of RAM that I have for my computer so I decided to "upgrade" to 64-bit. The only problem is that when I boot from the installation CD I get a memory management error. I know that my CPU is 64-bit capable as well as my video card. As for everything else I am not sure of. What is a way to fix this problem because I desperately need to upgrade to 64-bit.

View 3 Replies View Related

Version Not Compatible Error When Attempting To Launch Winword.exe?

Jan 10, 2012

System/software Info: On a fairly new Toshiba labtop. Windows 7 Home Premium Addition (64-bit). Microsoft Office 2010. All worked.Issue:Now when I attempt to open word documents or even word, itself, I receive the following error:"The version of this file is not compatible with the version of Windows you're running.Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.- Antivirus run was clear.- I'm able to launch other 2010 programs/files (like Excel, Powerpoint) without issue.- Confirmed file associations appear to be normal.- Attmepted to launch word in safe mode -- same error

View 1 Replies View Related

Attempting To Reinstall .NET Framework Fatal Error (0x80070643)?

Nov 8, 2011

A couple of my programs/games would not launch giving me a similiar error. After some research I believed it was a problem with .NET, well now I can't reinstall it. I've tried numerous things that have been mentioned on this forum. I'm going to copy and paste the error log that Framework gives me.[CODE]

View 1 Replies View Related

Windows 7 - I / O Error When Attempting To Format 250GB Drive

Dec 10, 2011

I have a 250gb drive that has not been formatted. I have an old H45 Tech enclosure from 10+ years ago, and had placed it in there to prep for NAS, as the NAS was not recognizing it either. Because I could not get it to read in the h45 box-- I was able to get it to format 128gb's of it, but I wanted the whole thing formatted to use all 238...gb of the drive, so, I bought a dynex 3.5" disc enclosure, it just arrived today, and while it read, and installed on my laptop, it would not allow me to format it. In going into storage mgmt, it said that it was not allocated, and asked me to select an option-- mbr, or as a secondary.

In looking at the notes, it said that the secondaries are only good for larger than 2tb drives. So, I selected the mbr, and got a message stating there is an i/o error in attempting to format it. Now, in plugging it in to check the message for specifics, it won't even recognize it, so now I can't even get to tell you the specific message. The pins are set to read cable select. I'm running Win7 Ultimate on a GW-M285 convertible, 500gb drive, 4gb ram.

View 2 Replies View Related

Error Occurred While Wizard Attempting To Change Password

Oct 8, 2012

When attempting to reset a password using a USB, after a new password is put in, it says "an error had occurred while the Wizard was attempting to change the password.

View 1 Replies View Related

Error 0x80070241 - File Is Corrupted Or Missing And Installation Cannot Continue

Oct 22, 2009

I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.

When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.

I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)

Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.

View 7 Replies View Related

IE 9 Installation Via Windows 7 Updates Error - Close Programs And Continue

Aug 25, 2011

I was trying to install the automatic win7 updates and in the 'important' update was ie9. I clicked on 'install updates' and windows started installing ie9. After a couple of seconds I got this window saying:: "Some files that need to be updated are currently being used by these programs. Please save your work, close the programs and then continue. If you can't close, setup can do it for you."

HP advisor
HpqToaster Module
Java UpdateScheduler
Microsoft Security Client User Interface
nokia launch application
quick launch buttons
windows desktop gadgets
windows explorer"

That's the list of programs that need to be closed. Obvious, I cancelled. Why do I need to close almost everything for installing a browser?

View 9 Replies View Related

An Unexpected Error Has Occurred. The Trouble Shooting Wizard Can't Continue.

Apr 30, 2012

I have a yellow triangle on my laptop that says I need to troubleshoot it. When I open the devices and printers and click on troubleshoot laptop I keep getting the error message 0x80070057. It says "An error occurred while troubleshooting:"An unexpected error has occurred. The trouble shooting wizard can't continue.

View 3 Replies View Related

How To Synchronize Two Computers' Favorites

Apr 22, 2011

i have two laptops, one for home use and the other one is for outside as the second one is lighter.i add new favorite quite often, so how can i make them synchronize the favorites automatically?

View 6 Replies View Related

How To Synchronize PC Clock Every 5 Minutes

May 31, 2012

My PC clock is drifting and I need to have it in synch with real time. Otherwise, I go 2 or 3 second off after 1 hour

Any know automatic tool to be run in the background?

View 3 Replies View Related

Attempting To Create A Backup System Image / Not Enough Space Error

Mar 18, 2012

I'm belatedly trying to create my first system recovery backup, on a system which I first installed Windows back in November 2011.I have a 1TB drive with a 214GB partition that I set up for a backup. I manually store all my media and pictures to both a separate partition on the drive, in the cloud, and on a separate external HDD, so all I really want to back up is the system image.This is the newbie sounding question to confirm my suspicions: The system drive I'm trying to back up is definitely bigger than the partition I've set aside for recovery. My C drive is a 473GB partition, and I'm using maybe a bit more than half of that currently. If this is the case, is there a way to reallocate un-used disk space from my other partitions to make the recovery partition larger, or should I be biting the bullet and shelling out for a 500GB external to cover my system recovery needs?

View 3 Replies View Related

Error Occurred While Attempting To Read Boot Configuration Data

Jan 13, 2013

I'm getting this every time I boot up my computer. It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: BootBCD
Status: 0xc0000001
Info: An error occurred while attempting to read the boot configuration data.

It simply takes me to the same screen when I hold "F8". So I cannot get the "Repair your computer." Option. I do not have the windows installation disc. Also, all I can do is basically start up my computer and it takes me to that screen every time.

View 1 Replies View Related

An Error Occurred While Attempting To Read The Boot Configuration Data

Jan 27, 2011

im getting that message upon startup. Im running windows 7.It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.I can't press F8 to access safe mode etc, nothing will happen.Pressing F12 to boot from CD just does the same thing as putting the CD in normally.

View 1 Replies View Related

An Error Occurred While Attempting To Read The Boot Configuration Data

Jan 13, 2013

I'm getting this every time I boot up my computer.It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc an restart your computer.

2. Choose your language settings, and then click "Next."

3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: BootBCD
Status: 0xc000000
1Info: An error occurred while attempting to read the boot configuration data.

[code]....

View 5 Replies View Related

An Error Occurred While Attempting To Read The Boot Configuration Data

Apr 20, 2012

I have built my own computer and I have a ASUS P9X79 Pro motherboard, an Asus GT440 graphics card and a Corsair 120gb SSD. I'm trying to get win 7 to install on this brand new SSD. No other drives connected. The BIOS which has been flashed and is up to date finds both the DVD drive and the SSD. I've set boot priority to the DVD drive and I keep getting this MSG below. My SSD is brand new and this would be new install........ Windows failed to start. A recent hardware or software change might be the cause. o

File:EFIMicrosoftBootBCD
STATUS: 0xc0000178
Info: An error occurred while attempting to read the boot configuration data.

View 2 Replies View Related

An Error Occurred While Attempting To Read The Boot Configuration Data - 0xc0000001

Aug 7, 2010

I'm getting this error after a forced shut down. I'm told to insert installation disk and repair but I don't get this option, I'm just returned to the same error message. I have tried restarting and loading windows from the installation disc. I'm told that windows is loading and the windows logo appears but after a while it goes to a black screen with only the mouse cursor showing.

File: ootBCD

Status: 0xc0000001

Info: an errr occurred while attempting to read the boot configuration data

View 5 Replies View Related

Windows 7 Won't Load - Error Occurred While Attempting To Read Boot Configuration Data

Feb 11, 2011

I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:

"An error occurred while attempting to read the boot configuration data"

Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.

View 8 Replies View Related

"an Unexpected Error Has Occurred.The Trouble Shooting Wizard Can't Continue"

Mar 15, 2011

I was unable to go on the internet for some reason.So i tired to use a trouble shooter.Then at one point it says "an unexpected error has occurred.The trouble shooting wizard can't continue"

View 4 Replies View Related

Installation Error: Setup Cannot Continue Due To A Corrupted Installation File

Sep 13, 2009

I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:

"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."

Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?

I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.

View 9 Replies View Related

"FATAL ERROR: Failed To Locate Necessary Table(s) To Make Adjustments. Press Any Key To Continue Booting"

Jan 27, 2012

I decided to install Windows7 Home Premium on my HP dc5000 SFF. it installed fine but every time it reboots, I get an error that says..."FATAL ERROR: Failed to locate necessary table(s) to make adjustments. Press any key to continue booting"This only happens when using the "restart" mode. if I use "shut down" and let the computer turn completely off, it will start with no errors!

View 8 Replies View Related

"An Error Occurred While Attempting To Read The Boot Configuration"

Aug 7, 2012

So this morning my computer was working and I went downstairs to grab something, came upstairs to find that it was off. When i turned it back on my computer ressponded with the "An error occured while attempting to read the boot configuration" problem. I popped in my installation disc to see if maybe I can repair it or even if all else failed just reformat and reinstall. Well when I get windows won't even reconize my operating system or the SSD/HDD that I have in there. I've wandered through the forums trying to find a solution and I can't seem to find a solution. Bios detects both SDD/HDD in Bios configuration but when I go to windows repair/install it doesn't even recognize them as being there. I've tried unplugging all other drives except the SSD (the SSD being the one with windows installed on it).

File: BootBCD
Status 0x0000001
Info: An error occured while attempting to read the boot configuation.

I'm running Windows 7 professional - Service Pack 1 My drives are:

Adata SSD S510 120gb
Western Digital Caviar Green WD10EARX 1TB

View 11 Replies View Related

"an Error Had Occurred While The Wizard Was Attempting To Change The Password"

Oct 8, 2012

when attempting to reset a password using a USB, after a new password is put in, it says "an error had occurred while the Wizard was attempting to change the password.

View 10 Replies View Related

Gave A Hell 3M Error One Time And The Other Time It Gave 9 Passes And 0 Errors?

Mar 9, 2012

they usally happens in the first couple of boots everyday (heard it is called cold boot error)and lately it happened with me while playing hardcore gamesI tried reinstalling win many times and formating the whole HDD but no use.I think the problem is related to my ram cuz sometimes when I rmove them and put them in the motherboard again the problem is solved for some time and sometimes nothing happens at all, and when I run memtest86 it gave me a hell 3M error one time and the other time it gave me 9 passes and 0 errors have win 7 pro x86 full retail versionI bought this computer more than 4 years ago, II had my motherboard fixed before and changed some ICs in it (I think over restarting the computer due to BSoDs caused it)

View 8 Replies View Related

Unable To Update Internet Time?

Jan 23, 2012

I am trying to update my computer's clock by synchronizing with an internet time source, but keep getting "Unable to continue - you do not have permission to perform this task. Contact computer administrator for help"!! As I am the only user, presume I am therefore the administrator, and have never had any trouble previously?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved