The Device For Universal Serial Bus (usb) Controller Is Not Intalled?
Nov 16, 2011
As some of you know I recently built my first computer and have limited experience with everything. I just noticed I have been getting this error and cannot find a fix.The device for Universal Serial Bus (usb) controller is not intalled. Install the latest driver for the device.I went to the Intel website to try and find a fix but got confussed becasue am not sure what my chipset is? I intalled one program but it didn't fix the problem.
I recently purchased a Logitech USB headset, and it worked fine for the first few days I had it. I noticed, however, about two days after the purchase that it failed to work. My USB mouse worked fine, however, so I figured it was the headset. I discarded the headset and continued using the built-in microphone. Later, however, when I had to restart my system in order to install an update, my mouse stopped working as well (they work fine on other computers). I looked to see what the problem was in the Device Manager, and my Universal Serial Bus driver was apparently damaged.
As well as my Standard Enhanced PCI to USB Host Controller and my Standard OpenHCD USB Host Controller. I attempted to uninstall, reboot my system, and then let Windows automatically reinstall the drivers, but they always fail to do so in the middle of the installation process. I then attempted to do a system restore the day before both the Windows update and then before the problems with the USB headset, but the problem persisted. If all else fails, I might have to reformat, but I do not want to have to result to that extreme since I cannot salvage anything of value onto an external hard drive.
The PCI to USB Controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The OpenHCD USB controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The Universal Serial Bus USB Controller has the error: The Drivers for this device are not installed (Code 28). The system cannot find the file specified. To find a driver for this device, click Update Driver.
I currently run on an HP Pavilion dv7 Notebook PC and run Windows 7 Home Premium Service Pack 1 (64-bit)...
just done a clean install retail Windows 7 Home Premium OS and have not been able to locate driver for the above. I used the disc which came with the computer for drivers etc and managed to install everything that was showing driver needed except for this. I have not used any USB devices as yet so is totally clean.
I mave managed to get USB Storage Devices to work, but things like usb printers are not working. The problems will be described in the following images. The Devices give the error 28 (no driver). Here are some pics- [URL]. I cant find any such driver. No system restore
When I enter device manager I see the Universal Serial Bus (USB) Controller with an orange explanation mark next to it. I need to get drivers for it where can I get them from (windows could not get any). Also im on my newly buily gaming pc on windows professional 64 bit.
I am running Win 7 service pack 1 [code] Device Manager says that drivers are not installed for the Universal serial bus controller. message reads:' The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element.' Windows cannot find any drivers when I get it to check for them.
Driver update program says new driver available 1.0. Any issues regarding updating this driver. No problems needed. Dell Inspirion laptop Win 7 Home Prem. 64bit 4gb ram
my driver updater asked me to update this driver (standard AHCI 1.0 serial ATA controller)..but i cannot do it using the software coz my internet connection is slow.So,i want to download it manually.Where can i get this driver?
upgraded my O/S from windows professional XP 64-bit with a clean install of windows 7 Professional x-64. The motherboard is an Intel D972XBX2, and the PC that it is installed in works just fine. The devices connected to the on-board SATA connectors include a 500GB Hitachi HDD and a Lite-on DVD-ROM drive, and I do not have any problems with these. However, indications in Device Manager are that no driver has been installed for the serial ATA controller, and this is a big puzzle that has me stumped. I am unable to find any compatible driver from either the Intel driver download center, or microsoft windows update, for this component and I am unable to get any assistance from Intel Tech Support. This is simply because the D975XBX2 mother board is no longer made by them. I've had this PC for almost four years, and all hardware passed the Microsoft windows 7 hardware compatibility test which convinced me to follow through with the upgrade to this operating system.
I had a problem with the computer after a storm it turns to not have internet. After I checked and saw I could'n connect to internet through the modem with a broadband connection. Than checked Device Manager and there was not a network controller and everything was in order no question marks or yellow rectangles. Than tried to re install windows 7. After I tried to install the realtek driver for me LAN it show up the message The RealTek Network Adapter/Controller was not found.
I've been having an issue with the xbox 360 wired controller since I built my new pc. When I plug it in via usb the device is not recognized by windows and no matter what I try it simply will not work.
Things I have tried: downloaded chipset drivers downloaded Software Downloads: Xbox 360 Controller for Windows tried the whole leaving the computer and all usb devices unplugged and off for a good few hours. ininstalled all the usb controllers and rebooted tried it in all usb ports, 3.0 and 2.0 searching for hours on google tried enabling/disabling usb legacy support in the bios tried running microsoft fixit thing (whatever that is) tried updating the drivers manually through the device manager but windows insists that the device is up to date. tried uninstalling and removing ethernet cable to try and force me to choose drivers. windows is fully updated I even bought a new controller thinking the last one was broken. The controller powers up when you plug it in, you can clearly see the green lights around the guide button flash but then nothing happens.
I had an "unknown device" show up in devices and printers a couple days ago. It was also listed in device manager and said it was a USB controller. Everything worked and I've not added any new hardware. I have 2 partitions both with Windows 7 and the error showed in both. I've found that others were having the same issue, some needed drivers, some said cables needed replaced. Before I got serious with the troubleshooting, I read up a little and found a forum that said you should shut down then disconnect the power cord, wait a couple minutes then power up. Sometimes the motherboard needs to reboot and the devices will be reloaded or reassigned as they should be. It worked for me, it was an easy fix to an annoying problem.
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
I have downloaded all drivers for my new HP1000-1136TU lap top. what are these two drivers for and how do I find them?PCI Device Driver & PCI Simple Communication Controller?
"Windows reports that the "A80CGSO8 IDE Controller" device is not working properly." how can i fix this problem..?? can u state where i can download the driver bcoz it also state "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"..
beside mass storage controller in device manager. when right clicked>properties tells me the device is "unknown" and there is no driver installed for it. I've a Toshiba satellite running windows8. can someone suggest a link for an appropriate driver download?
I am using acer aspire 7220 laptop with Win7 OS. I found a red cross near my volume icon and I see "No audion output installed" message. Also, When I checked in my device manager there is no sound, video and game controller. I see only three devices which are marked with yellow symbo. I have looke several forums regarding this issue but none solved the problem
