I have a problem with the monitor driver, i have a samsung syncmaster 940bw i cannot get the driver to be recognized so i can get the native resolution, for you that dont know this monitor, on any other resolution other than the native the screen shows ALOT of blur what makes viewing of whatever impossible, i have tried using the driver that is for all windows but windows7 (x64) discards the driver and uses the pnp one, even with DriverMax the drivers wont be accepted,
i'm currently using the DVI input with powerstrip (on a radeon 3870) and i got it to force the native 1440 * 900 but on games the resolution wont be forced, because windows wont let the drivers do their thing i guess, i have tried using the vga but the screen gets corrupted, i have the beta Windows 7 ati drivers also, i'm very frustrated by this.
I own a Samsung SyncMaster 913v, and I am missing its driver for Windows 7 but , when I check the website for download, it's only available for Windows XP, does it means I won't be able to find a suitable driver for it?
Does anyone know where I can download the drivers adn the magic tune software for this monitor Samsung Sync Master T240 LCD? Or do they know if samsung are going to write drivers for windows 7?
i just purchased this monitor, and to keep this simple, windows 7 doesnt recognise my monitor as a samsung. it just says generic pnp, but wont let me go above a resolution of 1280 x 720. the native resolution on this monitor is 2048 x 1152. i have a BFG GTX 280 video card so thats no issue there. all my drivers are up to date, and i also tried forcing a driver thats pre loaded with windows, but nothing works. anyone have any ideas?
EDIT: also tried forcing a custom rez through NVIDIA CP- no go.
My monitor: Samsung Syncmaster 933SN won't display at it's native resolution which is 1360 x 768. It will only display at 1024 x 768 which only takes up 2/3rd's of the screen real estate!
I have the most updated driver for the monitor, 3.0.0.0 from Samsung, which says it works on XP, and VISTA 32/64, but for some reason Windows 7 isn't recognizing the native resolution. It was recognized easily on Windows Xp when I bought it a few months ago, so what can I do?
I have a HIS ATI Radeon HD 4770 graphics card and a Samsung SyncMaster 2243NW monitor (native resolution of 1680x1050 @ 60 Hz) and I can't choose resolutions higher than 1600x1200.
I've installed the latest ATI driver but I can't find a Windows 7 driver for my monitor... Any solutions?
I have an old HP Pavilion t730m desktop pc. It has an onboard Intel 82865 G Graphics Controller, with a 19" Samsung SyncMaster 943NW lcd monitor and 2.0 GB Ram and Pentium 4. Currently it is running on Windows Vista Ultimate without Aero Effects, but everything else is working perfectly.
I would like to upgrade to Windows 7, as a matter of fact I've done it twice now, but whenever I do it I have monitor resolution problems, either I'm stuck with an 800X600 resolution or other options but not the current resolution of 1440x900 that looks great. So I have restored my backup of the Vista installation.
Sometimes when I change the monitor resolution, I get an incomplete screen display and a black bar on the right end of the monitor.
I would really like to upgrade to Windows 7 since my computer seems to run better than with Vista, but the screen resolution is very annoying.
I really hope that you can help me. I installed Windows 7 RC and after install my monitor resolution is set to 800x600. If I try to raise it, I get just one more option and when selecting it, I get a black vertical bar on the right of the monitor with still very bad resolution.
My Display Adapter is listed as Intel (R) 82865 G Graphics Controller (Microsoft Corporation XDDM)
and my Monitor is: SyncMaster 943 NW/943 NWX/ NW 1943/NWX 1943.
Recently, I've got a Samsung SyncMaster 2043NWX monitor. It's an used one, but it did work. My computer is an Acer Aspire M3920 (desktop), a more complete configuration can be found in my profile.
My desktop PC connects to my main monitor, an Acer P196HQV via an HDMI to DVI connnector, and my desktop PC connects to my second monitor, the SyncMaster, via VGA.
The problem is, however, the second monitor doesn't work. Windows 7 does detect a monitor connected via VGA in Control Panel > Appearance and Personalisation > Display > Adjust Screen Resolution, it says in the display box: Code: 2. Display Device on: VGA. In the Device Manager it only detected my Acer monitor, but after I downloaded the SyncMaster driver from the official site of Samsung, it detects the SyncMaster instead of the Acer monitor! This isn't the case in Adjust Screen Resolution.
The SyncMaster shows nothing at all, the blue LED, where I can tell the monitor is turned on from, flickers all the time, but the screen doesn't show anything.
I have tried reinstalling the driver, restarting my computer, installing the newest updates for Windows 7, making the SyncMaster my main monitor, turning off the Acer monitor, but nothing works.
The color that is displayed on my screen does not print out the same. The yellow which should be bright and is bright on the screen comes out as with an orance tint.
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
i changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
I have a brand new Dell XPS8500 running Windows 7 Ultimate x64. When trying to play online games, I keep getting this message:Display driver AMD driver stopped responding and has successfully recovered.The browser (Chrome) freezes up, the screen goes black, the error message pops up, the browser goes completely white and I have to go into task manager and kill it.I tried getting a screen shot but could not.
