Stuck At Resolution 1920x1080 But Its 1600x1200 For Real
May 15, 2012
have a benq 2420hd 24inch with native resolution of 1920x1080 its setted like that but feels like 1600x1200 and powerstrip information says so also everything is huge on the screen and some text is blurry. have a dvi cable connected .gcard is nvidia geforce 470 gtx i have rolled back drivers ,tried to tweak the dpi,change edid information maybe i do it wrong "powerstrip",scaling the desktop in nvidia do not mutch either im out of clues whats wrong. new cable? [code]
i have recently just formatted and re-installed windows 7, steam and counter strike source and previously i used to run my game at 1920x1080 but since formatting it no longer gives me the option of 1920x1080 in the video settings?
my LG w2243s worked fine on my computer before i upgraded to windows 7 from XP proffessional. now it doesn't recognise it. and wont let me adjust the resolution to the monitors settings, i tried updating the driver, but was told i already have the best driver available. my monitor is not listed in DEVICE MANAGER and when i download the driver from LG, it does nothing when i click it..
I have a new computer and monitor. It worked perfectly and the monitor was installed emmediately without me doing anything. So it all worked perfectly - until one day my SSD broke. So i had to send the SSD back - and got a new one. Great, I thought, now it will all work perfectly again. But, as I have finished everything and be happily in my account, my monitor wont let me set the 1920x1080 setting...its not even listed. OK, I thought, then I will install the driver. So I installed it from the CD delivered together with the monitor when i got it, but theres still no 1920x180 - setting listed. I tried nearly every driver download for my monitor and searched nearly the whole internet for solutions, but it was all the same. as highest the highest two are 1856x1392 and 1920x1440 - which looks horrible. So, the best resolution is 1400x1050 - which is just too wide. My monitor is the Samsung SyncMaster S22A300 LED-Monitor with, as said, 1920x1080 Shall i contact the management?
Every time I try to run a program (fullscreen) with lower resolution than the monitor (1920x1080) it gives screen waiting ... and only comes out if I press alt tab ... how do I fix this? I called the tech support .. and said that it has seven windows drive yet .. anyone know what do I get?
I am using 64-bit Windows 7, an LG W2363D monitor and an Nvidia GTX 560 ti. The monitor is connected using a DVI to DVI cable.I have had this computer for about a month, running fine at 1920x1080 resolution.However suddenly the resolution has dropped down to something very low, I think this was after some updates.Going into control panel or the Nvidia control panel, the computer still says that it is at 1920x1080 but this is obviously not true.It has been stuck at this low resolution for 2 days now.
I did a format on my computer and reinstalled windows 7.they worked well untill they restarted with a high resolution. Yeah exactly. Every time windows update downloads nvidia drivers(gtx460) windows STUCKS at welcome screen. Actually it shows only welcome screen but you can use windows normally(I can hear the sounds and if you press ctrl+alt+delete you can actually restart or shut down) but you only see tha classic windows 7 wallpaper
I have a sony Vaio VGN-SZ4XWN/C and recently installed Windows 7. Installation was fine, however the screen resolution does not go past 1024 x 768. The monitor is wide screen 1280x800 so would have hoped for this option.
I have tried these drivers
NVIDIA DRIVERS 179.48 BETA
and it does not recognise the hardware
and this option from another post, which does not work
Vista drivers and utilities Sony Vaio SZ available | Trevin Chow
I have recently loaded Windows 7 (Home Premium) on to a Dell Dimension 2400 (32 bit). Installation went smoothly but screen resolution is stuck at 480 x 640 which makes the computer practically unworkable. I understand (but am nor sure) that Dell does not support Windows 7 on this machine and the only solution is a new video card.
Pretty much the thread topic..upgraded from XP to 7 today and can't seem to up my resolution. Tried updating the drivers but they all say up to date. Went to HP's site to try and update the drivers but there's no option for Windows 7..just XP and Vista naturally lol but yeah just trying to expand the screen a bit cuz it looks off.
I cant go higher than 1200 1024 i think its. I was able to run in 1600 1200 in Xp on the same monitor. In the settings it even says recommended 1600. When i try this resolution the monitor just switches of so i press escape to get back to one previous. This occurs with any resolution above 1200.
Ive been with this problem since ive had windows 7 [couple months, more] now. I thought that if i buy a newer monitor this might fix it but if i can use 1600 resolution without buying monitor just yet then that would be great.
I know this computer can do it. I've done in Windows 7 and on Ubuntu before.
When I open screen resolution, the highest one displayed is 1600x1200. When I got to my adapter settings and click "List Modes" the highest one shown is 1920x1440, though when that one's clicked, my monitor says "mode not supported"..
I've tried using powerstrip. But when i get to the part where you install the driver, it won't let me install it. i click it over and over and over again, but nothing happens.. no error message or anything, it just won't go...
I've been trying to get this to work for hours. I have some embedded graphics intel chip thing.. i couldn't find an exact name anywhere..
If you have, I would like to have a screenshot of your desktop with the picture below as a desktop background.My intention is to promote virtualization technology and demonstrate graphically how you can run several operating systems on the same machine at the very same time.Here are the instructions:
1. Make sure that your screen mode truly is 1920x1080, (I don't want to have the wallpaper rescaled in the screen shot). Make the following picture temporarily your desktop wallpaper:
2. Open a window and arrange it as the black rectangle in green in the following picture:
This window could be paint, notepad or any software that opens a standard windows 7 window with Aero translucency. I want this window to look like a typical hardware demanding FPS game (such as Crysis 2 och Battlefield 3 or similar) running in windowed mode in Windows 7.
3. Make sure there are no desktop icons covering the green shaded parts of the image above and make sure that the window you have added is active. Press "SHIFT + PrintScreen" to capture the screen.
4. Open Windows Paint or similar software and paste the screenshot by pressing "CTRL-v".
5. Save the picture as 24-bit PNG, BMP or TIFF (NOT JPEG or any image format below 24-bit!), and submit it as is back onto these forums. You can upload it to e.g. "imageshack.us" but make sure you set the "Do not resize" (!) option.
First of all I weren't sure if this question should go into the GPU section but I think it's linked to windows 7!I have an eyfinity set up with 3 x 1080p monitors. When I play a game in eyefinity I turn my screens on to act as one 5760x1080, but when I'm finished playing games I turn it back to 3 separate monitors for general reasons. I was wondering if there is any software or programs out there that has the ability to set your 5760x1080 display to eyefinity when gaming but at the same time when not gaming it lets you use your monitors separately. For example I usually have 1 monitor for for each purpose(internet/editing/social media) but with eyefinity turned on everything is spread over the 3 screens.
banging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
I moved the Users folders from C: to D: one by one using the location tab from the folder properties ...When I finished surprisingly I found that the "Users" folder name became "Desktop" with its icon ... Although in reality it is not !!!! it still has the name Users but shows Desktop ... When I click the path it shows that
Using Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
Support for Sandy Bridge CPUs.VID based power consumption estimates for the newer CPUs.Improved log file formatting.Added a single system tray icon that reports the maximum core temperature.RealTemp GT updated for the 6 core Sandy Bridge E CPUs.i7 Turbo GT 1.30 multiplier monitoring tool. Download Real Temp 3.70 | techPowerUp
well my first ques is; i purchased a new laptop from a store but i did not ask whether window is real or cracked..so how i should do to know whether it is cracked or real?
I had to reinstall Win 7 today. I then installed BitDefender Free 2009 and when I discovered that there was no real time component, I uninstalled with Revo Uninstaller Pro. When I rebooted, nothing appeared on my screen. I checked the display by connecting it to me laptop and it is fine. How do I solve this?
when I open Real player to view a picture or videothe picture will open and then real player does not respond and I have to close the program using task manager. I have re-installed the latest RealPlayer and still have the same problem
X64 Windows 7 (full retail) The system is around 3.5yrs old. OS is around the same.
I have been getting quite sporadic and random BSOD's over the past few weeks. The last piece of hardware I installed was 2x2gb sticks of ram which I installed in November 2011.The only real other hardware/software I installed recently was a Logitech webcam, which I uninstalled yesterday but still received an IRQL_NOT_LESS_OR_EQUAL BSOD this morning around ten minutes after powering up.I have received other BSOD errors such as :
I have the Blue Screen Viewer and all the errors point back to NTOSKRNL.exe with various addresses, so they don't tell me much.I have updated the drivers to everything I can think of. I have ran memtest for a long time on all four sticks and then each stick seperately and they passed without any issues.I also ran CHKDSK and that came back with no bad sectors etc.On certain BSOD or freezes, the pc will not want to boot back into Windows straight away. The fans power up, I can feel the HDD whirring, but I get no BEEP and no signal to the two screens I have.
I'm using Matlab daily and I am using it in Real Time and I have some isues, so my friend told me how to put it on Real Time priorty in Task Manager...
I tried but I god error message: Unable to set Realtime priority. The priority was set to High instead...
I have real player and I'm sure you guys are aware that it has an add on that allows you to download videos of the internet. Well, every time I download a movie, my movies never seem to finish. The download tab says they're done downloading, but once I play them they are usually only 1/3 or half of the movie downloaded.
Version 14 uninstalled, Version 15 started installing at approx a 88% an RP desktop icon (a box with a bow..a free RP gift !!) appeared, then at 92% everything just stopped, the Icon disappeared....nothing !!Attempted reinstall from real.com numerous times with exactly the same affect !Carried out RP Instuctions to set User Accounts to ONCarried out RPinstructions C/Progs/Real file delete, still no uccessDid a Windows "Fix It" to rectify fault....no successTemp files removed.....still no go.Upon every download a new Real File appears in C/Progs......I removed the previous prior to each fresh download
