How to reboot laptop when it is stuck on x:/windows/system32/cmd.exe i have the same problem it shows me X:....i followed all things that you wrote here but to me doesnt show any volume or disk maybe that my laptop fall on the floor i also check the test how to say at the beginning and it says that the problem is : HARD DISK 1
View 2 RepliesI am trying to upgrade to Windows 7 (RC) from Vista Home Premium 64 Bit. I get all the way to "Transferring files, setting and programs. (66%)" and I get the following message:
The instruction at 0x76da3892 referenced memory at 0x00000000. The memory could not be read.
I have tried new media without any success.
Does anyone have any ideas why this is happening?
well it seems windows 7 x64 doesnt like old programs anymore despite numerous attaempts at repatching one of my favourite old games i cant seem to get it to work since an update caused me 2 BSOD in a row, the game is legacy of kain 1 and as far
View 2 Replies View RelatedWin 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
View 4 Replies View RelatedI can't Download TSG SysInfo because I'm on my hubby's laptop.Yesterday my laptop booted, but would go to blank screen.I forget what I did to get this message... "C:windowssystem32DAO350.dll unable to register the DLL/OCX: Regsvr32 fail with exit code 0x5 while installing an application.After doing a search... I found an article "Use the system file checker to troubleshoot missing or corrupt system files on Windows Vista or Windows 7.
ACER
Windows 7 Premium Home Edition
Intel Core i5CPU
M480 connections. 2.67Ghz 2.66Ghz
4GB
64bit Operating System
I did a command prompt sfc/scannow that only went as far as 49%, then said it could not complete.When that wouldn't finish,I tried "If the System File Checker tool cannot repair a file. Also didn't go anywhere.I got it booted in "Safe Mode" but nothing works. Not Comodo, Microsoft Security Essentials, or internet connections.I did go into C:windowssystem32 looking for the DAO350.dll... it wasn't there. I did find it in SysWOW64. I copied it into system32.After that and several cold boots, nothing seemed to change. I shut it down for the nite.This morning it actually booted all the way to desktop, with a bunch of services that couldn't run because of this error:"The instruction at 0x000007FEF728B013 referenced memory at 0x000007FEF728B013. The required data was not placed into memory because of an I/O error status of 0xc00000185"
When my pc is connected to my router i cannot access any files in windows explorer. If I try to open up any folder or open up my computer on my desktop I get an error saying "explorer.exe- application error- The instruction at "0x7736c5f7" referenced memory at "0x20e16972". The memory could not be read. Now when I restart my computer and disconnecting my computer to my router I am able to access my files but when i immediately connect my pc to my router I get the error again. Also I have swapped out my ram sticks for new ones, and I also ran spy bot search and destroy and anti malwarebytes?
View 1 Replies View RelatedThe error message is constant on my computer screen and will not let me open any of my documents. error Message - 0x746ae770 referenced memory at 0x746ae770.
View 1 Replies View RelatedI have a asus p6td deluxe board with 24GB ddr3 1600Mhz 2 nVidia GTX 295 Cards in SLi not overclocked YETand i7 975 EE why is the system alocating system memory to the cards when they have 1795Mb available as dedicated GDDR3.?? any one really know the answer. or are we all just shooting blanks[CODE]
View 1 Replies View RelatedI have been experiencing random reboots which very often fail and occasional BSOD crashes, the last one refers to memory management. I am running Panda cloud antivirus and malwarebytes.Original OS was preinstalled retail version win xp proff. Current OS full retail version win 7 64bit home premium Hardware new Dec 2006. Dual boot 2 x sata hard drives?
View 5 Replies View RelatedI have an .iso and a notepad instruction. I'd like to make an .iso a bootable disk. How can I burn the .iso (bootable) and the notepad instruction in one disk. What burning software do I have to use?
View 6 Replies View RelatedI have this error non stop on my display it says: C:OPTION-14B6F72-1146.exe The NTVDM CPU has encountered an illegal instruction.
View 1 Replies View RelatedI keep getting the "NTVDM CPU has encountered and illegal instruction" every time windows update tries to run (wuauclt.exe) and updates won't install. This started after the new Windows UPdate Agent was installed around 6/14. All updates have failed since then, I just get the popup errors. I ran several scans with Malwarebytes, Spybot, AVG and nothing was found. I ran the Fixit tool from MS and it indicated that there was a problem with windows update agent and the problem was fixed, but it still doesn't work. I'd love to reinstall windows update agent, but windows won't let me. Even the wuforce command won't force a reinstall.
View 5 Replies View Relatedhow to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies View Relatedi am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
View 9 Replies View RelatedMemory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system :
------------------------
OS : Windows 7 x86
Cpu : Intel P4 3.0GH
Vga : nVidia 6600
MB : Gigabyte GA-8I915G Duo
PSU : Corsair 750W
RAM : 2GB DDR-400 Transcend
(I have these memories for 2 years)
Physical Memory: 2000 mb
Paging File: 2000 mb
Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs:
Windows 7 HP 64-bit
gSkill 16gb 1866 memory (BIOS shows it at 1866, too)
Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets)
ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
View 6 Replies View RelatedTo start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
View 12 Replies View RelatedI have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
View 9 Replies View Relatedmy camara says memory card is protected (reset switch on memory card) how do you do this the camara wont take photos untill this is dun
View 1 Replies View RelatedSo i have 32x Windows 7 I also have 8GB of memory.
My question is how much memory can this architecture actually see? its 32bit, so shouldn't it only see a max of 4? in the my computer properties, it tells me i have 8, but a bunch of programs tell me i have the 3.25.
Do i need to move to 64x? and what happens with the drivers for my custom built pc? will i be able to find them? (most of my disks wont install 32 bit drivers on Windows 7 beta) i cant really do the vista driver backup with driver max, because i use XP
any help? ideas? suggestions? Thoughts? Comments? Wize cracks?
Will you answer from this screen?
View 3 Replies View RelatedIm am trying to figure out how to get rid of the right click delete option on internet 8 explorer,anyone know how??
View 3 Replies View Relatedi am getting sth. like stop:sth. like 0xnumbers EDIT: i saw the problem si in fltmgr.sys fltmgr.sys+5fbc andntoskrnl.exe ntoskrnl.exe+1cb7a
View 9 Replies View RelatedI have Windows 7 64 bit desktopI did fix where I didn't have to type my password at the startup, but, after the computer is silent for about 5 minutes or longer,this request (small box) to type in my password..again.
View 3 Replies View RelatedI was surfing and got this msg. What happened, and how can I prevent it from happening again?
View 2 Replies View RelatedI turned on my laptop and as usual started checking my work e-mails, suddenly I realized that I was not getting search results on recent e-mails, and I noticed that at the bottom, in activity bar, it said "Windows Search is not running". It suggested that I use the wizard to fix it, I downloaded and ran it, it then reset the search service and deleted all my past indexes. Why would my index damage/stop by itself?
View 7 Replies View Relatedwhen I am print why printer spoolsv.exe stop service
View 3 Replies View Relatedi have a asus p7p55d deluxe and ocz gold dual channel 1600mhz. page file in non-paged area how do i fix bsod?
View 5 Replies View RelatedI just bought a computer with windows 7 64 bit. This is my first experience with 7 and 64 bit. I needed to download java so selected the 64 bit version of 6 update 18. I went to control panel and opened java to turn off automatic updates but there is no update tab. Is this have to do with 64 bit? Do I need the 32 bit? How do I stop auto updates?
View 7 Replies View Related