I am trying to upgrade to Windows 7 (RC) from Vista Home Premium 64 Bit. I get all the way to "Transferring files, setting and programs. (66%)" and I get the following message:
The instruction at 0x76da3892 referenced memory at 0x00000000. The memory could not be read.
I have tried new media without any success.
Does anyone have any ideas why this is happening?
How to reboot laptop when it is stuck on x:/windows/system32/cmd.exe i have the same problem it shows me X:....i followed all things that you wrote here but to me doesnt show any volume or disk maybe that my laptop fall on the floor i also check the test how to say at the beginning and it says that the problem is : HARD DISK 1
View 2 Replies View Relatedwell it seems windows 7 x64 doesnt like old programs anymore despite numerous attaempts at repatching one of my favourite old games i cant seem to get it to work since an update caused me 2 BSOD in a row, the game is legacy of kain 1 and as far
View 2 Replies View RelatedWhen my pc is connected to my router i cannot access any files in windows explorer. If I try to open up any folder or open up my computer on my desktop I get an error saying "explorer.exe- application error- The instruction at "0x7736c5f7" referenced memory at "0x20e16972". The memory could not be read. Now when I restart my computer and disconnecting my computer to my router I am able to access my files but when i immediately connect my pc to my router I get the error again. Also I have swapped out my ram sticks for new ones, and I also ran spy bot search and destroy and anti malwarebytes?
View 1 Replies View RelatedWin 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
View 4 Replies View RelatedI can't Download TSG SysInfo because I'm on my hubby's laptop.Yesterday my laptop booted, but would go to blank screen.I forget what I did to get this message... "C:windowssystem32DAO350.dll unable to register the DLL/OCX: Regsvr32 fail with exit code 0x5 while installing an application.After doing a search... I found an article "Use the system file checker to troubleshoot missing or corrupt system files on Windows Vista or Windows 7.
ACER
Windows 7 Premium Home Edition
Intel Core i5CPU
M480 connections. 2.67Ghz 2.66Ghz
4GB
64bit Operating System
I did a command prompt sfc/scannow that only went as far as 49%, then said it could not complete.When that wouldn't finish,I tried "If the System File Checker tool cannot repair a file. Also didn't go anywhere.I got it booted in "Safe Mode" but nothing works. Not Comodo, Microsoft Security Essentials, or internet connections.I did go into C:windowssystem32 looking for the DAO350.dll... it wasn't there. I did find it in SysWOW64. I copied it into system32.After that and several cold boots, nothing seemed to change. I shut it down for the nite.This morning it actually booted all the way to desktop, with a bunch of services that couldn't run because of this error:"The instruction at 0x000007FEF728B013 referenced memory at 0x000007FEF728B013. The required data was not placed into memory because of an I/O error status of 0xc00000185"
The error message is constant on my computer screen and will not let me open any of my documents. error Message - 0x746ae770 referenced memory at 0x746ae770.
View 1 Replies View RelatedI am trying to upgrade to Windows 7 (RC) from Vista Home Premium 64 Bit. I get all the way to "Transferring files, setting and programs. (66%)" and I get the following message:
The instruction at 0x76da3892 referenced memory at 0x00000000. The memory could not be read.
Can anyone offer any advice?
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
View 9 Replies View RelatedI have an .iso and a notepad instruction. I'd like to make an .iso a bootable disk. How can I burn the .iso (bootable) and the notepad instruction in one disk. What burning software do I have to use?
View 6 Replies View RelatedI have this error non stop on my display it says: C:OPTION-14B6F72-1146.exe The NTVDM CPU has encountered an illegal instruction.
View 1 Replies View RelatedI am getting the error message " out of memory" whist in some programs. the explorer now and then shuts down and re starts . all sorts of funny things I have 6gb ram the hard drive makes a running noise far to long on stratup yet the start up files are minimul
View 3 Replies View RelatedI think windows 7 is so cool and i haven't got any complaints. Going from xp home to this is Awesome.
However I play flight sim x and since i installed Windows 7 i keep getting out of memory errors after about 5 minutes into a flight. It ran great on xp with 2 gig of ram and an old 8800gts 640 meg card.
I'm still using the same graphics card but i upgraded my ram to 4 gig of corsair ddr3 ram.
I'm not really experienced with understanding graphics and ram issues... can anyone help
Suddently from out of nowere my desktop stated to bluescreening me with Memory Management.
View 2 Replies View RelatedJust bought a used computer yesterday. Came with 4 x 1 Gig ram memory. It's an HP Pavillion desktop with an Asus motherboard in it. The motherboard itself can handle up to 16 Gig (x4 slots at 4 gig a piece) so that's not the problem. The problem is, everything I try to boot it with anything more than one chip in (1 gig) it runs, but nothing appears on the monitor.Just acts like it's going to boot and never does. I've tried using two and four sticks both, properly placed, and same error.
View 4 Replies View Relatedwhen ever any .exe is run it dumps a 0x0000007b memory error. I've replaced the .DLL for exes off the top of my head think it was summert like msi.DLL and still no good also ran Norton antivirus and although items were removed still no good did regserv32 with the .dll's and no result still same memory reference this is on a laptop running 64 bit home premium
View 2 Replies View RelatedAfter previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management". After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem. I have attached the last 3 minidumps I have.
View 14 Replies View RelatedAbout a week or so ago my asus laptop messed up and i got stuck doing a clean install of win 7. At first it would go straight to 100% on copying windows files and wouldn't do anything else so i reformated the drive. After that it started saying i had insufficient memory on the drive even though i have two 100 gb partitions.
View 3 Replies View RelatedHave a micro SD card. I keep getting memory card read error. I have many pic's on there I still want. There has got to be some type of program out there to retrieve them with this error.
View 4 Replies View RelatedEverything goes fine until the very last 'tick' then I get a memory error message. I've tried googling the error but no reference. Has anyone encountered this please?
View 2 Replies View RelatedI keep getting the "NTVDM CPU has encountered and illegal instruction" every time windows update tries to run (wuauclt.exe) and updates won't install. This started after the new Windows UPdate Agent was installed around 6/14. All updates have failed since then, I just get the popup errors. I ran several scans with Malwarebytes, Spybot, AVG and nothing was found. I ran the Fixit tool from MS and it indicated that there was a problem with windows update agent and the problem was fixed, but it still doesn't work. I'd love to reinstall windows update agent, but windows won't let me. Even the wuforce command won't force a reinstall.
View 5 Replies View RelatedI have 8 ram slots with one gig sticks in each which gives me 8 gigs of ram, Which my computer uses completely. I recently purchased 8 more gigs on two sticks, but when I install them it gives me a memory mismatch error, but it stills starts up. When I go to my computer properties menu it says 14 gigs ram (4 usable). Like I said there are 8 slots, 4 with white push tabs, 4 with black push tabs. I tried multiple combinations with the ram. Sometimes the computer would beep and not Start, others it would start up but still give me the mismatch errors. Need to update BIOS, Which I did. I have to change my BIOS settings to "Enable dynamic memory remap", but the problem is that I can't get into my BIOS. For some reason windows 7 isn't giving me a BIOS option (DEL) on the POST screen. It only gives me the option of going into system settings F2 or Boot menu F12. I tried ESC F1-F12 DEL END...to no avail.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 8
RAM: 8189 Mb
Graphics Card: NVIDIA GeForce GTX 285, 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1720199 MB; D: Total - 99 MB, Free - 71 MB; E: Total - 953766 MB, Free - 88455 MB; H: Total - 715202 MB, Free - 175942 MB; I: Total - 953603 MB, Free - 736122 MB;
Motherboard: Dell Inc., 0RW199
Antivirus: ESET Smart Security 5.0, Updated and Enabled
I just bought a new Windows 7 DVD; I insert the disc and waited until "Press any key to boot from CD". It took really long time and then it gave an error "Memory overflow error". My windows vista disc is working normally but windows 7 gives error.
View 9 Replies View RelatedOkay, so I downloaded my copy of Windows 7 from DigitalRiver from the 741 offer for students. It gives me the three files as usual, but when I click on the .exe, I get a command prompt saying "Program is too big to fit into memory" before quickly closing.
I didn't even get this expandedSetup file that people are talking about, so I can't make a .ISO out of it or anything. I am running Vista Home Premium 32-bit, attempting to upgrade to Windows 7 Home Preimium Upgrade 32-bit.
I've tried re-downloading it.
I've tried using a different computer.
I've tried increasing virtual memory.
I've tried running as administrator.
Nothing seems to work, and I'm beginning to think I'm the only one so far with this problem. I even asked my computer science professor, and he thought the lack of virtual memory was the culprit. I have 3GB of RAM, and was able to free up 2GB to no avail.
I have a Intel i5 2500k 3.3Ghz, with 4GB memory running on windows 7 ultimate 64 bits. My problem is, since I changed the OS to this "more advanced", I cannot play Flight Simulator 2004 without this error message that closes the game. "Insufficient memory, please check your hard drive..." My system only has Flight Simulator installed, plus microsoft office and Avg antivirus (not counting with all the system updates, drivers etc). I don't understand this problem, because before this OS, I had Win XP 32 bits, with a lot more programs and addons installed and running, and I never had this problem...even with all the graphics pumped up to the max in the game. My graphic card is Asus En9800GT nvidia with 1gb ddr3 and HD with 400GB still to use (same board and HD used with XP).
View 4 Replies View RelatedHow to solve memory stick error, it You need to format the disk in drive F: before you can use it.
View 1 Replies View RelatedI'm using Outlook 2007 on a Windows 2007 OS with a gmail account (pop3). When I send and receive I get the error message "reported error (0x8007000E) : 'Out of memory or system resources. Close some windows or programs and try again.'" I don't have any other windows or programs open... Don't know what to do,
View 5 Replies View Related(windows 7)do i need to keep system error files, memory dump files or debug files?
View 1 Replies View Relatedunlocked mmc by write protection.
View 2 Replies View RelatedI'm far from 'computer knowledgeable.'Windows7 Pro.I am NOT having any problems (no Blue Screen, system has 'frozen' twice in > year).
View 1 Replies View RelatedToday, My computer had a new problem. my computer had stopped and came back with blue-screen. It said memory dump failure. Computer halted and blue screen error popped up. It said the computer needs to be turned off to prevent further damage to the computer. Then its restarted automatically. And its fine now. But i want the reason for that error message.
View 4 Replies View Related