I think windows 7 is so cool and i haven't got any complaints. Going from xp home to this is Awesome.
However I play flight sim x and since i installed Windows 7 i keep getting out of memory errors after about 5 minutes into a flight. It ran great on xp with 2 gig of ram and an old 8800gts 640 meg card.
I'm still using the same graphics card but i upgraded my ram to 4 gig of corsair ddr3 ram.
I'm not really experienced with understanding graphics and ram issues... can anyone help
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
I am getting the error message " out of memory" whist in some programs. the explorer now and then shuts down and re starts . all sorts of funny things I have 6gb ram the hard drive makes a running noise far to long on stratup yet the start up files are minimul
Just bought a used computer yesterday. Came with 4 x 1 Gig ram memory. It's an HP Pavillion desktop with an Asus motherboard in it. The motherboard itself can handle up to 16 Gig (x4 slots at 4 gig a piece) so that's not the problem. The problem is, everything I try to boot it with anything more than one chip in (1 gig) it runs, but nothing appears on the monitor.Just acts like it's going to boot and never does. I've tried using two and four sticks both, properly placed, and same error.
when ever any .exe is run it dumps a 0x0000007b memory error. I've replaced the .DLL for exes off the top of my head think it was summert like msi.DLL and still no good also ran Norton antivirus and although items were removed still no good did regserv32 with the .dll's and no result still same memory reference this is on a laptop running 64 bit home premium
After previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management". After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem. I have attached the last 3 minidumps I have.
About a week or so ago my asus laptop messed up and i got stuck doing a clean install of win 7. At first it would go straight to 100% on copying windows files and wouldn't do anything else so i reformated the drive. After that it started saying i had insufficient memory on the drive even though i have two 100 gb partitions.
Have a micro SD card. I keep getting memory card read error. I have many pic's on there I still want. There has got to be some type of program out there to retrieve them with this error.
Everything goes fine until the very last 'tick' then I get a memory error message. I've tried googling the error but no reference. Has anyone encountered this please?
I have 8 ram slots with one gig sticks in each which gives me 8 gigs of ram, Which my computer uses completely. I recently purchased 8 more gigs on two sticks, but when I install them it gives me a memory mismatch error, but it stills starts up. When I go to my computer properties menu it says 14 gigs ram (4 usable). Like I said there are 8 slots, 4 with white push tabs, 4 with black push tabs. I tried multiple combinations with the ram. Sometimes the computer would beep and not Start, others it would start up but still give me the mismatch errors. Need to update BIOS, Which I did. I have to change my BIOS settings to "Enable dynamic memory remap", but the problem is that I can't get into my BIOS. For some reason windows 7 isn't giving me a BIOS option (DEL) on the POST screen. It only gives me the option of going into system settings F2 or Boot menu F12. I tried ESC F1-F12 DEL END...to no avail.
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit Processor: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 10 Processor Count: 8 RAM: 8189 Mb Graphics Card: NVIDIA GeForce GTX 285, 1024 Mb Hard Drives: C: Total - 1907626 MB, Free - 1720199 MB; D: Total - 99 MB, Free - 71 MB; E: Total - 953766 MB, Free - 88455 MB; H: Total - 715202 MB, Free - 175942 MB; I: Total - 953603 MB, Free - 736122 MB; Motherboard: Dell Inc., 0RW199 Antivirus: ESET Smart Security 5.0, Updated and Enabled
I am trying to upgrade to Windows 7 (RC) from Vista Home Premium 64 Bit. I get all the way to "Transferring files, setting and programs. (66%)" and I get the following message:
The instruction at 0x76da3892 referenced memory at 0x00000000. The memory could not be read.
I just bought a new Windows 7 DVD; I insert the disc and waited until "Press any key to boot from CD". It took really long time and then it gave an error "Memory overflow error". My windows vista disc is working normally but windows 7 gives error.
Okay, so I downloaded my copy of Windows 7 from DigitalRiver from the 741 offer for students. It gives me the three files as usual, but when I click on the .exe, I get a command prompt saying "Program is too big to fit into memory" before quickly closing.
I didn't even get this expandedSetup file that people are talking about, so I can't make a .ISO out of it or anything. I am running Vista Home Premium 32-bit, attempting to upgrade to Windows 7 Home Preimium Upgrade 32-bit.
I've tried re-downloading it.
I've tried using a different computer.
I've tried increasing virtual memory.
I've tried running as administrator.
Nothing seems to work, and I'm beginning to think I'm the only one so far with this problem. I even asked my computer science professor, and he thought the lack of virtual memory was the culprit. I have 3GB of RAM, and was able to free up 2GB to no avail.
I have a Intel i5 2500k 3.3Ghz, with 4GB memory running on windows 7 ultimate 64 bits. My problem is, since I changed the OS to this "more advanced", I cannot play Flight Simulator 2004 without this error message that closes the game. "Insufficient memory, please check your hard drive..." My system only has Flight Simulator installed, plus microsoft office and Avg antivirus (not counting with all the system updates, drivers etc). I don't understand this problem, because before this OS, I had Win XP 32 bits, with a lot more programs and addons installed and running, and I never had this problem...even with all the graphics pumped up to the max in the game. My graphic card is Asus En9800GT nvidia with 1gb ddr3 and HD with 400GB still to use (same board and HD used with XP).
I'm using Outlook 2007 on a Windows 2007 OS with a gmail account (pop3). When I send and receive I get the error message "reported error (0x8007000E) : 'Out of memory or system resources. Close some windows or programs and try again.'" I don't have any other windows or programs open... Don't know what to do,
Today, My computer had a new problem. my computer had stopped and came back with blue-screen. It said memory dump failure. Computer halted and blue screen error popped up. It said the computer needs to be turned off to prevent further damage to the computer. Then its restarted automatically. And its fine now. But i want the reason for that error message.
I keep getting the following errors on startup and then after awhile they will pop up again and again.
Werfault.exe - Application Error
The instruction at 0x73f61320 referenced mamory at 0x73f61320. The memory could not be written.Click OK to terminate the program
wermgr.exe (Same message and memory location)
Here is the TSG SysInfo log:
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0 Processor Count: 4 RAM: 5610 Mb Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb Hard Drives: C: Total - 595354 MB, Free - 401604 MB; D: Total - 14820 MB, Free - 1647 MB; F: Total - 99 MB, Free - 89 MB; G: Total - 953867 MB, Free - 877240 MB; Motherboard: Hewlett-Packard, 358B Antivirus: Norton Internet Security, Updated and Enabled
I own a Dell XPS M1710 running Windows7 (5 years old). The graphics card has already been replaced once (after 1 year) due to a well know heating problem (made tolerable by cooling pad). I get Blue screen and Memory Parity Error some of the times I start up but mostly it freezes at the black screen point. Memory check gives all clear and I have tried swapping out all of the RAM with (working) modules but still get the same error message. Tried updating the graphics driver, no change. Tried disabling the Graphics device in Device manager and this had a slightly different blue screen but the same basic result.I suspect the graphics card Nvidia Go 7950 GTX because the fault first happened while playing an MP4 file.
recently from past one month i am having low memory problem. i need to restart my laptop and every things ok for sometime. i have kaspersky internet security and also i did a malware check using malware bytes. nothing came up. i also notice that when playing movies in Internet or vlc the computer the video seems to freeze for about two seconds and back to normal. i am adding the dump files and also a screenshot of resource monitor. my laptop seems very slow for the past month as well. i did a windows memory diagnostics and everything was fine.
here are the specs of my laptop: make: hp pavilion dv-3 2360ee processor: intel i3 m330 2.13 ghz ram: 3gb system: 64 bit
I recently ran a program called RegOwnit.exe on my windows registry to take ownership of the registry. But before I did that I made a backup copy of the registry by selecting Export and All from RegEdit.exe and saving a file called backup.reg. Since then I've been having issues such as no sound, I can't open "My Computer", "Control Panel", "My Documents", "Recycle Bin" When I try to I get an error message stating "there is not enough free memory to run this program."So I tried restoring the backup I made of the registry by going to Import and selecting backup.reg from there. But nothing changes in the registry at all. I just get various error messages each time I do that such as. "Cannot import C:UsersOwnerDesktopackup.reg: Not all data was successfully written to the registry. Some keys are open by the system or other processes." I've even tried doing it in Safe Mode.So my next guess I thought was to run System Restore but that hangs and never completes. The first time it ran I let it sit for 12 hours before I realized it was never going to finish. I've tried running it several more times since then, even selecting older restore points but it always hangs and I end up sitting here waiting for it to complete but it never does.I have Windows 7 Home Premium 64bit My computer is a HP Pavilion dv4 Notebook PC with 4 GB RAM and 76GB free space on Drive C. Intel Core processor. I don't have any usual configuration. It's practically new.I found someone else with the same problem on here, and one thing I was able to fix was by following the directions at the thread at
[url]...
Someone said to make sure All Users has permission to access the registry: Quote: Make sure that System and Users (and just to make sure maybe Administrators and your account name too) have more or less unrestricted access to the registry hive"HKEY_CLASSES_ROOT" So I added Users to HKEY_CLASSES_ROOT and now I can open My Computer and Control Panel etc, but I still have no sound. In fact when I try to put on an MP3 I get an error that says "Your soundcard driver does not support this type of sample format."What I'd really like to do is run system restore or be allowed to import my full backup of the registry to the point before all of this happened. What's the point of having a tool for backing up the registry and making restore points if you can't roll back to them?
My Sony VGN-NW320f using windows 7 Pro Ricoh memory stick controller keep giving me an error every time I try to install a new USB device like, USB INTERNET hub, black playbook, any usb phone cant connect to desktop software. In the divice manager it says driver cannot verify the Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I am trying to use all the 4 GB of RAM that I have for my computer so I decided to "upgrade" to 64-bit. The only problem is that when I boot from the installation CD I get a memory management error. I know that my CPU is 64-bit capable as well as my video card. As for everything else I am not sure of. What is a way to fix this problem because I desperately need to upgrade to 64-bit.
I have 460 MB of system error memory dump files and 900 MB of temp files when I go to disk cleanup. I tried to delete the memory dump files but they remain. How, and maybe more importantly, SHOULD these be deleted? Will it harm anything?
I am trying to uninstall the trail version of avast internet security but after restarting my computer it is giving the error of memory dump with blue screen and icould not start the pc normally... I have also tried to uninstall it using uninstall utility but am facing the same problem continously.
When I try to go to my computer I get an error (explorer.exe - application error. The instruction at 0x774bc5f7 reference memory at 0x48e44c59. The memory could not be read.) I ran my norton 360 scan and malwarebytes scan and no virus/spyware detected. Also I ran memtest to see if my rams were bad and everything seems find. I also try to do a system restore and it fails too.
