I have a dell Inspiron n4010 it had Trojan viruses on it so I did an reinstall from the recovery partition now windows 7 will not boot I get a flash of the blue screen of death with a stop error 0x0000007b I can't get in to windows to check anything. I no longer have the dell disks that came with the comp. I have tried to reinstall from the partition 3 times and no luck
View 6 RepliesRecently, I've been getting a lot of BSODs and I've been trying to find what may cause them. I used the Device Manager and disabled a couple of devices. I've probably disabled a necessary device, and now when I'm booting my PC, it's getting to the point when it shows the Windows 7 logo, and then restarts, and so it gets into an endless restart loop.I then pressed F8 to try get into Safe Mode, but Safe Mode is not working as well. So I then pressed F8 when starting Windows again and chose "Disable automatic restart on system failure" to see what error code is being thrown. It shows the following: Code: *** STOP: 0x0000007B (...) Unfortunately I don't think I can get dump file because Windows is not working at all, but I have a very good assumption that I disabled a critical device in the Device Manager. Here is the list of devices that I've disabled: Code: Acronis Backup Archive Explorer Floppy disk drive (don't have any floppy disk drive)Standard floppy disk controller (same thing as above)High Definition Audio Device PCI bus (*I think the problem is here and is related to the on-board graphics card. I think It's an Intel graphics or something like this.) My question is: is there any way to somehow enable this PCI bus device from anywhere?
View 4 Replies View RelatedThe blue screen A problem has been detected and windows has been shut down to prevent damage to your computer I also get this messege when I try other options:
Problem signature:
Problem Event name : StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201006
Problem Signature 05: AutoFailover
Problem Signature 06: 10
Problem Signature 07: NoRootCause
POS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
I have Windows 7 Home, 64bit, 4 G of RAM, GTX 285, Intel Core 2 Quad I had recently installed trial version of Kapersky . I had an earlier message after trying to restart and a black screen with the message bad image sector or something like that. It started several times before. Now it will not start and I had to disable the automatic startup and I got the above messege. I cannot do the system restore because it just won't and I hear Kapersky sometimes prevents this. No detecable disk errors have been noted but it still will not even boot into safe mode. This process just keeps repeating and nothing seems to be helping. I had this message before when my screen flickered before but the computer kept running. It has restarted automatically before also but with no problems. My system will also, not restore to another check point. I am ready to reinstall windows.
I needed to reinstall windows on my laptop, but I had to recover some files from the hard drive, so I took the hard drive out and connected it to my desktop PC. I installed the windows on the hard drive using my desktop PC too, because the laptops DVD ROM doesn't work anymore. I successfully installed windows on it, everything worked. I put the hard drive back in the laptop, booted the laptop and it popped up a BSOD saying:Check for viruses on your computer. Remove any newly installed hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/F to check for hard drive corruption, and then restart your computer.Technical information:***STOP 0x00000073(OXFC8D3640), 0xC0000034, 0x00000000, 0x00000000
View 3 Replies View RelatedI have a decent PC (i7 2600, 16gb ram, SSD + 2HDDs, etc). I've been using it for about a year.Since it's a work machine, in the last few weeks, I've been using VMware on it to use other experimental software, with no problems.Today, I tried to create a new VM and the software asked me to update it to a new version. I did it, create new VM and rebooted to change a config in the Bios (about virtualization). But when I tried to boot again, surprise: BSOD.
STOP: 0x0000007b, (0xFFFFF880009a9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)
When I got back to the BIOS, I found the boot order to be different. I fixed it but no good. I disconnected the other HDDs and all I got was a different boot error message. I plugged the SSD in another machine and it worked fine?
I cloned a hard drive that had an image all set up with all kinds of programs and settings. Now that I put that cloned hard drive in a new computer (any) even the same exact harddware of an older computer, it gets BSOD and auto restarts. Tried startup recovery and no fixes found or worked.
View 3 Replies View Relatedwhen ever any .exe is run it dumps a 0x0000007b memory error. I've replaced the .DLL for exes off the top of my head think it was summert like msi.DLL and still no good also ran Norton antivirus and although items were removed still no good did regserv32 with the .dll's and no result still same memory reference this is on a laptop running 64 bit home premium
View 2 Replies View Relatedso yesterday I decided to upgrade my computer with a new motherboard/cpu.But I wanted to keep the old hard drive since I have all my files there, and everything was going smoothly until I actually tried to boot it.When I boot Windows 7 it gives me this bluescreen error: Code: STOP 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000) I have tried to reinstall windows on another clean hard drive, but doesn't want to boot that either.
Specs:
Power supply: The one I had in my old HP Pavillion, 460w
Motherboard: Asus M4A88T-V EVO
CPU: AMD Phenom II X4 965 BE
Hard drive: Seagate Barracuda 200GB 7200 ST3200822AS
Graphics Card: EVGA GTX 460 1gb
Windows 7 Ultimate x64 full retail The hardware is from 2010 or so.The age of the os installation is 2011.
Had to perform Reinstall, reinstall completed when Restarting after reinstall, it will not boot, it gives me Microsoft loading bar then BOOM cuts rightout.. I attempted another reinstall same thing.. So I disabled automatic restart and this is the exact error: BSOD: 0x0000007b (0x80786B58, 0xC0000034, 0x00000000, 0x00000000) I saw in another forum possible registry adjustment could cure it however, it would require for me to take SSD out, which I really would like to avoid if possible, not an easy job for me with this smaller netbook.... I also tried changing SATA Drive from AHCI to ATA, and vice versa, no luck.. Stuck.
View 14 Replies View RelatedHaving a BSOD error on boot and simply put MS support says it is a RAM issue and when I run any other diag it says HDD issue.History is the machine suffered the fake hard disk errors bug a few months ago and we thought we removed that completely, then a few days ago the pc did an update and after auto restart has not worked the same.The machine boots fine till it gets to starting windows and then BSOD.Have tried /mbr - replaced fine but no difference?Have tried AVG Boot drive and scan - Found a few sus files and removed them still no difference?Have tried chkdsk /r - this found no errors Also cannot boot in any of the modes at all?
View 14 Replies View RelatedI have tasks that I need to keep running while I am away from the computer and they are getting locked up and not running everytime Windows 7 logs me out after 10-15 minutes or so.
how to stop Windows 7 from automatically logging you out? So I can stay logged in?
I would like to stop or prevent my pc from logging me out when i connect to it with my android phone, is this possible? The application I am using doesn't require me to install anything on my pc and it works over wifi
Android phone: HTC evo 4g
RDP application: Remote desktop client
My laptop won't stop trying to do a backup (it's the first backup ever on this laptop) - for the last couple days the little flag in the system tray keeps coming up, after a minute or so of starting up my laptop, saying it's doing a backup (which is slowing it down incredibly). But when click on the backup message and try to open it, it opens up the box which only comes up with the title "backup and restore" and nothing else appears so I can't stop it that way. Even when I go into control panel to try and open it that way, it's the same.I've also gone into services and disabled it that way, but this hasn't worked either. I've also tried the "SFC /Scannow" method but it also doesn't work - the black command box flashes up for a second and disappears immediately every time I've tried it.
View 1 Replies View RelatedI have problem in my PC can't be start at winlog.
View 2 Replies View RelatedI am using Windows 7 Professional.I am playing the songs and about minutes later it becomes standby automatically so it's the interruption of my watching, especially when there is no touching. What must I do to keep it active though I am not touching any keys or mouse?
View 4 Replies View RelatedMy main problem is I have a BD movie player that keeps reacting badly to windows updates. Yes I turned it completely off and did not have it connected to the net but somehow it found 1 rouge update that when I had no choice but turn it off it installed it. I have always hated updates but never has it caused me this much grief.
View 4 Replies View RelatedThere's a multiseat software on my computer, that's a trial edition (friendlyseats). It's a perfect free edition... except for the fact it restarts the computer every 30mins or so... is there a way to prevent all programs from restarting my computer?
View 14 Replies View RelatedI install most Windows 7 updates, but I am not ready to go to IE9.But every time I turn on my laptop I get a notification of a "new" update avaialable, that ends up being for the IE9 I keep declining.How do I stop Windows Update from notifing me on specific updates I want to decline.
View 2 Replies View RelatedM$ has stripped-down Win 7 so much, it's nearly impossible use it effectively. Many features which used to allow users control over their own system have been removed.I want to know how to stop Windows 7 from displaying its irritating "User Account Control" pop-up redundantly, every time I click on a program listed in my "Start" list. The only way M$ offers users to stop the nag dialog is to lower the "User Account Control Settings" to a lower ("not recommended") setting, FOR ALL PROGRAMS!It does NOT require me to answer any question when I click on the icon in the Taskbar for the exact same program! I'm referring, for example, when I want to run either Windows Explorer 32-bit or Windows Explorer 64-bit. And, I have 1/2-dozen other programs in my list that I use many times daily. Many of them won't open without M$ asking me "if I want to open it!" Of course I do! I installed it/them so I could use it/them regularly -- any time I want to!!If possible, how can I configure this OS to stop nagging me redundantly when I want to run (my) installed programs which I use on a regular basis? My system:
* OS: Windows 7 Professional, 64-bit
* M$ stuck me with its beta IE 9 browser (both 64-bit and 32-bit), although I didn't want it! Now, I can't get rid of it. Typical M$.
[code]...
When i shut down my pc,it shuts down with no problem,but when i restart it,windows begins to load it and suddenly it stops.I need to turn off my pc for 5 mins,then it loads windows correctly.I can never restart my pc.The problem is not about windows 7,i had just change from xp.I was having the same problem with windows xp.Everything else is good in my pc,just i'm having this problem.
I have recently purchased an i7 Ivybridge, Corsair Vengeance 8GB and Asus Z68 to upgrade my home built PC. Today, after assembling the parts, the usual splash screens show up all the way up to the windows logo. After windows finishes loading, a STOP: 0x0000007B error prevents me from going further. I have attempted to restore to 2 days previously with no effect and startup repair cannot solve the issue. When using my old motherboard, windows starts normally. Diagnosis and repair details state the Root cause as 'Unspecified changes to system configuration might have caused the problem'.
EDIT: Switched ACHI to IDE in BIOS. This allows me to reach the login screen but I am unable to use mouse & keyboard.
How can i stop windows 7 from installing a preconfiguredriver for my video card. I want to install my own driver for my video card but windows detects it and installs their own preconfigure driver.
View 14 Replies View RelatedWhen doing wipe and reloads of windows on customers computers one of the most time consuming things are doing all the windows updates. Is there a way to run windows updates non stop until it is finished with all the updates?
View 4 Replies View Relatedwhat this following error code means? I'm guessing it's some kind of hardware failure but I can't figure out what. I bought a new western digital caviar black 1TB hard drive, installed it with Sata cables and installed Windows 7 ultimate on it and it worked fine for a couple of days. All of a sudden today I get this error. I should mention that the reason why I decided to replace the hard drive is because my other hard drive(s) were fine until one of their sata cable broke in half and even tho I replaced the sata cables on those drives they still won't boot and would cause BSOD's. So, I decided to buy a new drive and new cables and try it.
Technical information:***Stop: 0x00000124 (0x0000000000000000, 0xFFFFFA8005B3E028, 0X00000000B2000000, 0X000000000004008F)
How to stop data uploading in windows 7?
View 2 Replies View RelatedSo I've googled the tar out of this and tried everything obvious, not sure what I'm missing. Here's what I got.Dell XPS desktop (wired and wireless connections)boot the machine and all is fine. After sometime browsers stop working. Firefox, IE, Chrome.I can ping google by URL and IP no problemIt's the same with either connection.I can ping my router and other network devices but can't get in via browser.I've turned off windows firewall, ran uninstall tools for dells preinstalled security.I've reset the tcp/ip stack, flushed DNS, reinstalled drivers, shut off power options on the cards. 've tried static IPsI've remove/reinstalled browsers.I've seen others with this problem but no solution, I'm close to giving up and doing a reinstall but don't want this to happen again.
View 5 Replies View Relatedi turn off the auto arrange option but the icons sort over to the left side of screen every time i turn off the computer or restart
View 2 Replies View RelatedHow to stop Windows offering software updates that it has been told isn't wanted (repeatedly) ?
- Internet Explorer
- Browser Choice Screen
- MSE Updates
I don't use any of these.
My laptop has suddenly slowed down considerably. I've run eset online scanner and scanned with my antivirus Trend Micro Titanium and found nothing at all. I've tried running Ccleaner and using the registry cleaner. I've also tried defragmenting my hdd but nothing is working. Overall its is generally slow but alot of the time Windows explorer freezes and stops responding and needs restarting.I have an asus K55VD notebook with Windows 7 Home Premium SP 1, quad core i7 processor, 8gb ram, 2gb dedicated graphics and over 200gb of free space on my hdd. If it makes any difference I have windows 8 installed on a separate partition although problems didn't start when I installed it.
View 14 Replies View RelatedHow does one stop Wndows Live Mail from loading so I can use my regular email provider? It happens when I reply to email from there or sending Word, Excel or Power Point documents.
View 5 Replies View RelatedI run Windows 7 and have Norton 360 AV. I keep getting annoying pop up adverts for coupons which appear in the bottom right hand corner of my desktop. Is there any way to stop these and, if so, how?
View 1 Replies View Related