Start Up Is Getting Stuck
Oct 10, 2012
I am having a problem with my new HP desktop Win 7 pro, 3.3 ghz i5 sandy bridge, 8gb ram. I own the machine since about 3 month, in the beginning I was delighted with the speed, then gradually performance decreased (as with it has with all widosw machines I have owned) the last couple of days it has been getting stuck hopelessly while I was working with lightroom and photoshop (things I need for my job) and today I finally had enough and started scanning for malware. All scans returned negative so I thought I'll get rid of some of the software I don't need, I deinstalled an expired trial for Acrobat, after that the machine di not want to start up properly anymore (It would not load all programs on start up and never get to load the sidebar apps) so I went into a software I have called ccleaner and deactivated some start up programs I thought could be the cause (can't remember exactly which ones but mainly adobe updtaer and alike) It only made things worth, nowmost of the times I start up after entering the user password the screen stays black, sometimes it loads the desktop but many of the software icons in the start mennu are not loaded, If I use shortcuts like ctrl+Alt+shift to bring up the task manager it returns an erros message(this has actually been happening for a while in a couple of occasions, just now I tried to bring up the control panel.
View 8 Replies
ADVERTISEMENT
Mar 25, 2012
I have been having many problems with my Presario HP CQ62 Notebook PC running Windows 7 Home Premium and I got so frustrated I picked factory default and I dont have any type of product key on me so what can I do?? Is there anything possible I might be able to do? I got some installation disks from a few of my friends one is the Windows 7 and I have tried 3 times already and it keeps getting stuck and wont start up. So the other two that I have are Microsoft Windows XP Professional Service Pack 2 can I even run that on my PC since I was running Windows 7 before
View 9 Replies
View Related
Mar 15, 2011
I can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies
View Related
Feb 27, 2012
have window 7 premium home addition. In the last 5 days when i start up my computer.windows 7 gets all the way to signing in then it just stalls for 5 minutes, then it finally logs in. After that it freezes up programs and sometimes i have to keep rebooting until the system decides to run smooth an not get stuck.I have run iorbit maleware, windows defender(but that freezes up), advance system care 5, i run windows update, and my anti virus program is avast. I am at a loss because I do not know why this is happening and have no clue how to fix it.
View 4 Replies
View Related
Mar 15, 2011
My ipod is stuck at the start-up screen. It's a black screen with the apple logo and a bar under it, the bar is empty. How do i fix it so it loads and gets to the lock screen as usual?
View 2 Replies
View Related
Dec 26, 2012
I can not get my computer to start up. I have gone through the recovery start up, pressing F8 to get to the screen, after pressing system recovery, it just takes me to a blue screen and then back to the page that tells you windows failed to start up normally. I have tried safe mode, the same thing happens and then I tried last known good configuration. That led me back to a blue screen with nothing happening except the lights on the front of the computer blinking white several times, then orange back and forth. At one point it did go to a black screen with the lights on the front blinking, but it did that forever and nothing happened
View 3 Replies
View Related
Dec 23, 2011
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card
View 14 Replies
View Related
May 9, 2011
I was attempting to run chkdsk and went into Safe Mode -- no problems discovered. However, since then whenever I boot / reboot laptop Safe Mode screens reappear. Thinking back I don't recall any guidelines from any Win7 tech sites advising turning off Safe Mode. So, I initially assumed Safe Mode automatically reverted to the prior mode -- apparently an incorrect assumption. How do I get back to Normal Windows Start Up for Win7 Home Premium x64?
I got out of Safe Mode to restart somehow -- ESC key -- I did not force quit by turning off. Since then system now starts by scrolling thru 2-3 screens of "Loading: ... (various driver drive locations / various names)" and then Win 7 login screen comes in with Password box.
Everything else is running fine now except I suspect I need to go back to boot Safe Mode screen and turn Safe Mode off -- return it back to Start Win 7 Normally.
View 1 Replies
View Related
Dec 4, 2012
So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
View 5 Replies
View Related
Jun 25, 2012
has a zoostorm freedom which was working fine and now it's not!! It is stuck in a start-up repair loop. My husband has tried to follow solutions suggested on this site but no joy. Have also tried to re-install windows 7 but no luck either. Took it to PC world and they can't h
View 1 Replies
View Related
Feb 13, 2011
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies
View Related
Jan 5, 2013
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies
View Related
Nov 9, 2012
How can I get this going again. It says registry is missing or corrupt. The cd to repair won't start so I can't use the repair?
View 1 Replies
View Related
Dec 26, 2012
I installed a bunch of Microsoft Windows Updates after being away for a few months. I installed all of them at the same time and when my computer restarted it now stays stuck in the "Starting Windows" screen. I pressed F8 in hopes to start it in safe mode but I got a message saying "Failure configuring windows updates reverting changes" but it just goes back to the starting windows screen and nothing happens.
I also chose "Repair Your Computer" and it asked me for an administrative password but I don't remember what it is since I set it up a few years ago and disabled booting with a password.
View 4 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Sep 17, 2012
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
View 9 Replies
View Related
Jul 1, 2012
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies
View Related
Feb 5, 2013
I have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
View 1 Replies
View Related
Dec 28, 2011
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies
View Related
Mar 2, 2012
1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
View 1 Replies
View Related
Dec 8, 2012
F keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies
View Related
Sep 3, 2012
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies
View Related
Feb 7, 2012
My laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies
View Related
Nov 3, 2012
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
View 6 Replies
View Related
Feb 25, 2011
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
View 2 Replies
View Related
Apr 12, 2011
The problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
View 9 Replies
View Related
Oct 18, 2012
I have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
View 1 Replies
View Related
Mar 1, 2011
I have an Acer Aspire M5811 running Windows 7 - 64 bit. When I tried to start my pc tonight I ended up with just the desktop wallpaper with no icons or start menu.
I tried to reboot in safe mode but the pc became unresponsive. I also tried using the system restore disc but again nothing.
View 2 Replies
View Related
