Several BSOD Errors; Seven Forums File Attached?

Jul 24, 2012

I've been having a lot of BSOD's since i installed my new graphics card. I thought it was the graphics card itself, so i exchanged it for a new one - the problem still persists. I also uninstalled all the drivers, and try'd new ones. I even try'd some of there BETA drivers - still nothing.Who crashed says it's a driver issue, so i'm guessing that's what it is. Considering I've run several diagnostic tools to see if my hardware was the issue.

View 6 Replies


ADVERTISEMENT

Multiple BSOD In 10 Days, Minidump File Attached

Apr 19, 2012

This is a windows 7 x64 AMD CPU, Radeon HD5770, eyefinity triple monitor setup. About two years old system.

AMong 2 monitors, I have 2x Acer X193w connected via DVI, another one is a X2gen connected via display port.

The X2gen monitor usually won't turn on when I wake the computer up, it make the "tip tip tip" clicks for minutes before eventually turned on.

It was fine until about 2 weeks ago, crashed 6 times so far.

View 1 Replies View Related

[BSOD] BSOD Recently Started All Required Files Attached?

Dec 5, 2011

I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.

Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.

I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.

1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days

View 9 Replies View Related

Prevent Removing Attached VHD, From Safely Removed Attached Media?

Feb 16, 2012

prevent users from removing a attached VHD from "Safely remove hardware and eject media", We have had multiple users eject the VHD when they are going to unplug their USB and they are ejecting the attached VHD instead.

View 1 Replies View Related

Random BSOD Screen And DMP Attached

Nov 5, 2011

I'm have a "random" crash, that occurs at different times, sometimes when in IE, othertimes in Word, and other times when doing nothing! Or simply don't initialize. Sometimes the computer crashes but maintain the screen, only freezes all. Other times the BSOD comes. When system re-starts, try the "initialization recovery", but nothing. I have installed (formated) the Windows 2 times (last this week) , it's a fresh install, Windows 7 retail and updated to SP1, x64. Drivers are all updated and all devices have their drivers correctly installed. It's a clean system, with Avira (antivirus) and no overclock or something like. Normal use. I used memtest86 for 10 hours and all it's ok.

View 9 Replies View Related

Automatically Resize Attached Pictures Via File And Choosing Right Setting

Sep 27, 2012

I'm aware of the fact that you can automatically resize attached pictures via file and choosing the right setting.I was wondering if there is a setting which automatically changes the size of a picture which is actually in the mail and not attached.

View 1 Replies View Related

Random BSOD, Error 0x0000010d (dump Attached)

May 22, 2012

For about a week I've been experiencing random BSODs, after about 4 months of stable performance. There are no recent hardware or software changes that I'm aware of. The crashes are truly random, sometimes it will go 2 days without a crash, and then the next day I will get 2 or 3 crashes in an hour. It doesn't seem to correlate with a particular program or device attached. For some reason, my System Restore had been turned off so I have no way of restoring to an earlier point prior before the crashes. I do however backup the system regularly with Acronis Backup, and if I can't solve this I'll have to restore to a prior Acronis backup.Here is my OS info (for full system specs click on My System Specs at bottom left of post):

- x64
- the original installed OS on the system? NO.
- Full retail version (Ultimate)
- What is the age of system (hardware)? LESS THAN 6 MONTHS.
- What is the age of OS installation (have you re-installed the OS?) LESS THAN 6 MONTHS.

View 4 Replies View Related

Regular BSOD's Under System Load (logs Attached)

Jun 3, 2012

Windows 7 Ultimate 32bit (retail) installed for about a week.

I am trying to troubleshoot regular BSOD's on my system. They seem to occur during HD video playback (XMBC) or under other system load like downloading large files (from newsgroups) where the speed is fairly high (apx. 2mbps).

I recently replaced my single core CPU for a dual-core thinking it may help, but it didn't. Now, I'm wondering if it could be the memory. I did the windows memory check, and it reported errors, but I don't where to find the log or what to do next.

View 7 Replies View Related

Message Only When On These Forums?

Feb 17, 2013

I dual boot XP and W7. No problems with XP but if I use Win 7 to access the PCAdvisor forums, the following message keeps appearing:-"Stop running script?A script on this page is causing your web browser to run slowly. If it continues to run, your computer might become unresposive.I'm using Inetrnet Explorer 8I click on "YES" and the message disappears but re-appears when I select another forum..

View 3 Replies View Related

How Many People On These Forums Have Tried Windows 8

Oct 9, 2011

Just Curious in whether a lot of the Windows 7 community have tried W8 at all.I really like Windows 7 but I've also been incredibly surprised at how stable and fast W8 is too -- It's primarily based on Windows 7 but it is a bit different.To me it's amazing that Windows 7 has evolved into something that could be used as a competitor to Android on mobile devices / tablets while still retaining features that are still needed on a PC using a "Classical OS".

View 9 Replies View Related

Zoom Level Is Not Holding On A Webpage - Windows 7 Support Forums?

Feb 9, 2013

i am on a webpage, any webpage, and as i'm looking at the page it can slowly or quickly get smaller and smaller. my zoom will go from my normal 125% setting down to 12%. i reset the zoom and it happens again. this has been an interrmittent problem for the past few weeks. i use IE9. tonight i downloaded firefox to see if the problem would appear there also. it did. so i do think it's a windows is there some way to lock the zoom? what is causing this? my computer is set to download windows updates automatically (not the optional ones).i don't know if it's related, but at times the icons on my desktop get small. when i check i see that it is set to small icons. i change it back to medium icons, and it goes back to small icons. this also is intermittent, and sometimes seems to coincide with the webpage zoom issue, but not always.i sometimes lose my hot key settings for my wireless keyboard. for example, i hite the hot key for mail and nothing happens. this also is an intermittent issue that sometimes coincides with the other issues and sometimes does not.

View 7 Replies View Related

Paging File Keeps Having Errors

Jun 26, 2012

I have a 4GB ram drive and I am trying to set the paging file to it, but every time I restart it sends me an error message saying it doesn't have enough space, and it resets the paging file to my boot drive. whats confusing me is I know the ram drive has enough space.

View 7 Replies View Related

File Permission Errors?

Dec 13, 2010

Recently I have been receiving lots of File Permission Errors when saving documents.I have searched the internet endlessly and have still not found a solution.Sometimes, when I save from Word (2010) I get this error: Quote :Word cannot complete the save due to a file permission error.

View 9 Replies View Related

Different BSOD Errors

Aug 29, 2012

i've been having bsod on win 7 for over a week, i have had these problems previously, win 7 32bit to 64bit reinstall worked last time. this time i have tried installing win 8 pro 64bit to separate ssd drive. clean install, also having similar issues. i've started debugging some of the dumps. a few have pointed to avg and the gpu. i uninstalled avg and used driver sweeper to remove video, sound and ethernet drivers. this had only made the bsod take slightly longer to happen. sometimes the are happen under load (utorrent and playing bangbang racing), other time just Internet, and even while idle(just utorrent). i have stress tested the gpu, cpu, and run check on ram and hdd. i am leaning to faulty motherboard but i don't want to fork out for a new one until i cam be 100%.

View 2 Replies View Related

How To Fix Cannot FindC:Program File (x86) Errors

Aug 1, 2011

I recently tried to open my already installed blackberry desktop software. Whe i do i get this message;Windows cannot find 'C:Program Files (x86)Research InMotionBlackberry DesktopRim.Desktop.exe'. Make sure you typed the name correctly, and then try again.I tried uninstalling< but I then get a 1316 error message and cannot complete the uninstall. as well I can not carry out the repair option, because i get the same 1316 error message.

View 7 Replies View Related

Getting Random BSOD Errors

Sep 11, 2012

i am getting random bsod's lately. pc worked fine then 1 time i got a bsod and since that i keep getting them randomly. i installed a fresh window version but i stil get those bsod's . i think it could have to do something with memory orso . but since im getting diferent error codes im not sure what it can be. the errors apear mostly at or right after startup. and sometimes just when the pc is on for some time . i attached the file requested and hope that someone here knows where i should look for to fix this.

View 8 Replies View Related

Pc Freezing Without Errors Or Bsod

Jul 28, 2012

So my pc has been randomly freezing and locking up after an hour or two of use and i cant figure out why. I have updated my graphics card and bios.I have tried both ram sticks in individually into the first slot, so unless both ram sticks went bad at the exact same time, they should be ok. I did try to run memtest overnight, but upon waking i found that the pc had restarted.I have cleaned out the pc of dust, and the heat seems fine on cpu, gpu, and mobo.I have run a full av scan with malware bytes and cleared up registry and temp files with ccleaner.

View 15 Replies View Related

Any File Downloaded Cannot Open Causing Errors

Mar 5, 2011

On the pc everytime a file is downloaded it is not able to run. Examples windows updates will not install adobe update gives an integrity error. This computer was just put on the Internet for the first time this week I'm thinking its an ISP error but if it's an issue within the computer what could be causing it. A disk check was ran and came up with no errors all cookies and temp files were deleted.

View 9 Replies View Related

BSOD After Checking For Errors On Drive C?

Aug 26, 2012

My system had been very slow and hanging for a while now, so i decided to to check for errors in my drive C. Since then anytime i put on system it show the BSOD at approximately 3 minutes after booting. Currently my system only works fine in safe mode.

View 2 Replies View Related

BSOD Happening Randomly Getting Different Errors

Dec 14, 2011

I have run memtest and dskchk in dos to verify RAM and HDD integrity because I was getting lots of pc lock-ups where the only thing to do was hard shutdown.The two most recent errors i got was driver_irql_not_equal_or_less with stop: 0x000000C4,the other page_fault_in_nonpagedarea with win32k.sys error, no stop code.

View 6 Replies View Related

BSOD - Multiple With Different STOP Errors?

Feb 4, 2012

I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.

All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.

All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.

View 3 Replies View Related

BSOD From Ntoskrnl.exe, Multiple Errors?

Mar 7, 2012

Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.

1)A system restore to a couple weeks ago
2)Repair the system/OS with my Windows 7 disc
3)Replace the RAM

Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.

View 5 Replies View Related

BSOD Errors A1 (Memory_Management) And A (Irql_Not_Less_Or_Equal)?

Jun 19, 2012

I have had a very solid stable system since 2010, then I decided 6 GB of RAM and a 9800GT/GTX560Ti wasn't enough. I sold these parts away and replaced them with 24 GB of RAM and a GTX560Ti 448 edition. The instant I throw these new parts into my box I start getting the two different BSoD errors (the ones in the title). I have cleared everything of my previous overclocks with the upgraded components.System Specs: (bolded is what was introduced to the system which created the errors)Windows 7 Professional x647 930EVGA 132-BL-E758 (Motherboard)EVGA GTX560Ti 448 FTW EditionPatriot Extreme Performance (24 GB of RAM)If you need to know anything besides the core components that I have, let me know. Attached are the dump files.

The story so far:I have ran Memtest overnight on all the sticks of RAM and nothing comes up, it claims they're all good. I'm not sure how to test the graphics card, but what I can tell you is that I can login to Windows and within 5 minutes the BSoD shows itself. When in safe mode, (where I am right now), it runs more stable, but I have had it BSoD in here as well; It's just nowhere near as often. So, this makes me think its not hardware related and hopefully it's not because I have no other RAM sticks or graphics card to test with.My thoughts:I only used 3 of the 6 slots for RAM on the motherboard before this upgrade so initially I thought maybe I had a bad slot. I can't disprove that, but I still get the BSoD when using only 1 stick of RAM in a slot that was previously known as working. I uninstalled the graphics driver for my old GTX560Ti and downloaded the latest driver for my new graphics card and still get a BSoD.

View 2 Replies View Related

BSOD Atikmdag.sys And Other Errors During Gaming

Jun 27, 2012

After a long time of trying to fix this problem by myself, i turn to the pro's for help I've been having a lot of BSOD errors while playing games and occasionally during browsing / playing movies on my pc. The most common error messages include:

BAD_POOL_CALLER
PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NO_LESS_OR_EQUAL
Atikmdag.sys error.

After some research i thought it might be the RAM, so i went to the pc shop and my RAM was still under warranty so they gave me a new one and the problem seemed to have gone for a short time, then it came back and has been haunting me ever since. It usually occurs during gaming: the pc eithers shows a BSOD, or the sound loops and the screen is full of blue/red/green lines or it just resets. I added some minidump files of the latest crashes, hope it helps to determine the problem.Might it have something to do with my old BIOS version? 14.04 dated 28/05/2010?

View 1 Replies View Related

BSOD Errors In Windows 7 64bit?

Jul 6, 2012

I've just installed the full retail version of Windows 7 64bit and am having regular BSOD crashes and 'Recovered from a serious error' messages. Hardware is 1 year old (Intel DH67GD) i2500K, 12 GB RAM).

View 9 Replies View Related

Win7 RTM 7600 64-bit BSOD Errors

Aug 22, 2009

My wife's computer with 7600 RTM 64-bit installed is experiencing about daily BSOD errors. She had similar problems under XP 32-bit as well and I tried replacing various components and drivers to see if I could resolve the problem. Nothing seemed to help. The problem might be resolved for a while, but eventually always came back regardless of what I tried to do.

Restarting the computer Windows presents a "recovered from serious error" dialog and displays an error message. The message we typically get is similar to:


Problem signature:

Problem Event Name: BlueScreen

OS Version: 6.1.7600.2.0.0.256.1

Locale ID: 1033

Additional information about the problem:

BCCode: 4e

BCP1: 0000000000000099

BCP2: 00000000000D3BFA

BCP3: 0000000000000002

BCP4: 00000000000D3DF9

OS Version: 6_1_7600

Service Pack: 0_0

Product: 256_1

Files that help describe the problem:

C:WindowsMinidump

View 3 Replies View Related

0x0A / 0x0A1 BSOD Errors?

Nov 6, 2011

I'm getting these errors more frequently, and usually when I'm browsing the web. I just got the 0x0A one when I installed the Asus mother board Utility tool for my P8P67 LE REV 3.0 mother board.I get the 0x0A1 error off and on, about 3 times now I've gotten it. I've attempted to use memtest86 but to no avail. I burned the iso onto a disk and had the system boot disk first, nothing happened, it booted normal. I tried the USB stick way and install it using that method, attempt to boot from the USB first in the boot priority and still... nothing.

View 19 Replies View Related

Various BSOD With Different Errors During Install Of Windows 7

Mar 2, 2012

I have recently built a computer with the following components:
Asus 990fx Sabertooth motherboard
Zambezi 6-core Am3+ cpu
16 gb g-skill ram
180 Gb SSD
1 TB 7200 rpm HDD
2 MSI GT 560's

Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.

View 8 Replies View Related

File Transfer Errors From Windows To Mac Mini Server?

Nov 20, 2012

Linksys E3200 Router

3 - Windows 7 Machines (Enterprise & Ultimate) , Tried wire and wireless
1 - Windows 8 64-bit machine
2 New Macbooks (Air and Pro)
1 Mac Mini server (2011 model) - 3TB external HD formatted in OS Journal (default mac) with samba sharing enabled

The macbook's we have connect and transfer large amounts of files just fine to the mac mini. No issues at all, even on wireless. The issue is when trying to transfer files from the Windows machines to the mac mini. You select just one 150mb file to copy over, and it might fail at 30mb or 120mb transferring giving an error like file or path is not available. However you can hit retry a few times and it might continue or restart, sometimes you have to cancel and copy the file over again. It acts like it loses the path, but you can instantly navigate to the server again instantly like there was never an issue. If you select a bunch files to transfer, lets just say like 2000 files, and its a total of 4gb. You will have to hope the retry works when the error happens or click skip and redo the file after. Nothing stands out that is causing this, but it is either an issue with the Mac & Samba transfer, router setting, or a Windows setting / registry issue causing it.I tried to search google, but most things that come up are how to setup sharing from mac to windows. Can't exactly find anyone else talking about this, except I did find 1 thread on Mac Rumors forums talking about it but it just had 2 people say they have the same issue, and 1 person said he had no issues.

View 8 Replies View Related

Out Of Memory Errors With Ridiculous Page File Usage

Sep 12, 2012

I have been using Windows 7 for quite some while (2 or more weeks) on this new PC. Now...problem is, Task Manager shows a massive page-file usage. 1.40 GB used as soon as my PC starts (without loading any programs). I have 4 GB RAM, out of which, 3305 MB is usable (Microsoft licensing issues keep messing around with 32-bit Windows), and the page-file usage slowly gets to around 3 GB. I have 4 partitions on my 1 TB HDD, and I had 2-4 GB page-file on each. I disabled the page-files on all the partitions, but TM still shows a massive usage of 2.5 GB as I am writing this article. I mean, there's 4 GB RAM, and even without running any programs, it's still around 1.40 GB page-file usage.

I disabled Superfetch and the page-file on all the drives, now Windows is giving me out-of-memory errors. The only things open are Google Chrome, Windows Live Messenger, mIRC, Windows Media Player, Task Manager, Yahoo Messenger and Bit-Torrent, and none eat memory. TM is showing 710 MB RAM available out of 3304 MB, and 70 MB free. IDK what is using the RAM and causing this big a page-file usage. My PC is gone very slow, and it sucks. Any way to reduce this much disk-activity, and actually use the RAM? Nothing in the TM shows active (CPU is always at 0-5 %), so nothing is eating memory. What's causing this much RAM and page-file usage?

View 49 Replies View Related

BSOD Happening Few Times / Various Errors Displayed

Nov 10, 2011

I have some problems with BSOD. It can happen few times a day, and it can appear after a week without problems. Usually it happened when I use the internet, but yesterday, for the first time it happened 2 minutes after I turned on the computer, without doing anything.I updated all the drivers without any positive result.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved