I just installed a new SSD. Should i disable or move the page file? I currently have it disabled.. My system has 24GB of ram.. If i should have it enable.. how do i tell it to use a different drive?
I just did a fresh install of Windows 7 Ultimate 64 bit on a SSD (120 GB Intel X-25M), and now I'm juggling with the dilemma of what to do with the page file. There doesn't seem to be a consensus on this issue from my internet research.Here's the situation as it stands: I have 8GB of RAM, and windows has created a 8GB page file.
1) Keep everything as is 2) Move the page file to another hdd (a WD caviar black) 3) Keep the page file on the SSD, but shrink it to 1 or 2GB
(Some people simply disabled their page file. I've ruled out this option as overkill)
a. Page file will will shorten SSD life span b. counter-argument: maybe, but that is an over-blown concern for modern SSDs c. If you have enough RAM (8 gigs is certainly that), the page file is useless
Most of my research was from 2009 threads and discussions though. Have things changed? Is there a better understanding of this topic now to render a verdict? I'm leaning towards shrinking my page file to 2GB (and leave it on the SSD) as a compromise between every concern.
I am the proud owner of a Windows 7 Ultimate comp with 6gb ram, i7 920, etc... I have had this comp for about 1.5 years, and it has been slowing down... The bootup time has slowly been increasing, and the amount of time for me to actually be able to use programs once I see the desktop has increased. I have disabled all but the completely necessary startup programs/services, but this does not seem to work.
Whenever I start up my computer, sometimes I open task manager and check out the performance window and every time my computer is slow, I see the hard faults skyrocket. At startup, the thing is over the max shown on the graph for a while. To my knowledge, the hard faults/sec represent that the computer is either writing to or reading from the page file.
Anyway, down to the real question: Would disabling the page file decrease startup times, by forcing the computer to write everything to the ram, instead of tying up the already-slow hdd by writing/reading the page file?
I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
For the past week whenever I click the Page Down Key, the Home Key or the Up or Down Arrow Key it takes me to the very end of the page. The only way I can move about the page is by using the Scroll Bar. Why did this suddenly start happening and how can I correct?
How can i disable the notifications in the yellow boxes at the bottom of the page for IE9?
I just want to surf without being interupted by those just about every other website i go to
And for all those IE haters out there....i bounce around to FireFox and Chrome too. So dont just jump out and say dump IE (if that came across as harsh, but i want some REAL replies)
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
I'm running Windows 7 Ult SP1 64bit (clean install) and would like to know what's the best way to set up the page given I have (2) HDD's? The drives are currently installed as follows:[CODE]
I am running Windows 8. I know this forum is for Windows 7, but the Windows 8 forum is under developed and doesn't really have any members yet.I am selling my laptop, so I'm installing Windows 7 since I have Windows 8 now. I was going to install it off a flash drive. Every time I go to try to transfer the Windows 7 Starter files onto the flash drive, I can't transfer 1 file. It says I need to permission to move it
I'm not sure if this may be more of a vmware issue, but I figured I'd start here. Basically I have a 56gig vmdk file, that refuses to move. The vm is not broken at all and works fine. I've moved several vm's off my laptop drive onto this new usb drive. I'm working with an alienware m11x r3 with a 750gb 7200rpm drive & a usb 3.0 wd my passport external drive that IS using drive compression. (blue text for file/folder names) I've tried to move this file via explorer and tera copy. both fail. in the explorer scenario, I've burnt at least the weekend attempting to get this file off my drive. in a few cases it gets down to just a smidgen of space in the transfer progress bar with a 'theoretical hour remaining', but that was 10 hours ago. when I'd look in resource manager,it starts off in a normal read from c drive and write to d drive action. but at the end, it is just writing, and its moving at like 700kb a sec.
After I installed Windows XP Mode on a host with 4GB of RAM, Windows 7 Upgrade Advisor said there was only 3GB RAM. By default a VM is assigned 512KB. Does a VM use a page file? What made Windows 7 Upgarde Advisor think there was only 3GB when 4GB of RAM is installed?
i have windows 7 width 2 partitions system C: and data D:,i set virtual memory size to custom 256MB on C:,but memory performance program reports page file size 3200MB,dxdiag reports 3200MB too,i set pagefile long time ago, so system is updatedC:/pagefile.sys has 256MBD: has no pagefile
Know I have done a good amount of research and heard all different angles. I am going to test some of these things myself and time it real time with a stop watch! This tweak is mostly aimed at system performance for gaming but would like to hear the pro's and cons.Win 7 64x I have a Core i5 750 overclocked to 4Ghz and I have 8GB DDR3 1600, GTX 570 and a Velociraptor 300GB 10k RPM drive. So my system moves fast as it is.I was wondering if someone from Toms Hardware could do a definitve test showing the performance ganes and ideal setups.System ram (hardware) is much faster then a pagefile on any hard drive. Some programs want to have a pagefile but most seem to be like Adobe Photoshop.I have seen people say over 4GB disable page file.Set page file to 512MB with over 4GB of RAM.Setup pagefile on 2nd hard drive.Leave it to system managed on Win 7 because it handles it differently then WinXP used to and any tweaks make no difference.So again I can do my own personal testing but I think it would be great to have a full review to answer all these questions and put it to bed so to speak. I honestly think it would be very benificial to do an article then have information just posted in the forums.
I'm gettingthe same "out of memory" error message on Outlook 2007 running under Windows 7 (64 bit). Reading this thread, I checked my RAM and Page File Size and they are both ~6G... Should I REALLY increase my Page file size to 12G?
Between WOW and FFXIV and some misc other things I only had 2 GB of free space on my 60 GB SSD so I lowered the page file which was eating about 12 GB down to 1024MB. Is this going to effect my pc at all? I have 8 GB of RAM
I have 32gb of ram, paired with a 128gb ocz ssd. I've heard about disabling page file or reducing the amount. Currently I've reduced it to 512 - 2048 and regained a lot of space on my ssd, which I'm very happy about. Any suggestions or fine how I have it?
I got problem with my 2nd laptop. I can't defrag my computer. That's all. They say they can't move file. It's not a system file. And I'm using admin account to defrag HDD. I tried various defragger. Such as Auslogics and IObit.
I have big file (133Gb) backup file on my hard drive and I wanted to move this to external hard drive (Seagate FreeAgent GoFlex Drive). When I tried it to move or copy to the external I've got message: Error 0x8007045D: The request could not be performed because of an I/O device error. I was looking online for some help and I found some advice that I have to make chkdsk in cmd mode but when I tried I've got message: "Chkdsk" is not recognized as a internal or external command, operable program or batch file. I don't know how to solve this problem. Can someone help me? My OS is win 7 Enterprise x86.
Let's say, I am moving a file from a folder to another or changing a file's name.These changes do not show in Explorer unless I right click and select refresh.Has this happened to anyone?
before my hard drive crashed I had a freeware program that allowed me to right click on file or folder and move or copy to any place on computer. I lost it and can not find.
After my computer has been running for some time (maybe days), it gets really slow. I found a great memory manager that cleans the memory. I was wondering if there was a way to clean the Page File without rebooting. BTW, I use Process Explorer so I know there is nothing running that shouldn't be hogging resources.
I have attempted to place my page file to an external disk via USB > I:, on my Win 7 HP system as I had on my old Vista HP system, to assist in performance.fter setting no (zero size) pf on C: going through the motions on re-start I get a message indicating that windows has by default created a pf on C:, (I take it this is for memory dump purposes) & on checking the external disk no pf was created although in advanced settings dialogue box a �system managed� text is indicated against drive I:, the funny thing is on C: the page file size was exactly the same prior to change even though no page file is indicated for C: in the dialogue box.I tried again leaving a 200mb fixed sized pf for the memory dump on C: but got exactly the same response, system managed pf on I: where no pf exists on the drive.
Is it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
I have a computer with 6 gig memory in Win 7. I have 2 HDs. I have been reading about the Page File/Virtual Memory for years. It includes everything from none for 6 gig memory, 1 to 2 times regular memory, place in separate partition, place4 on 2nd HD
Since 2 days, in a certain folder, I cant rename, move or delete folders or files. Now, it has spread to my desktop as well. If I rename a folder, even a new folder, the name changes ''magically'' within seconds to restore to its previous name. If I move the folder or file, it comes back and if I delete it, it restores. I tried to make a system restore, even format (!), the problem persists. I use this folder to tag and rename my new mp3s so I have to be able to 1) rename, 2) move the folders the files and folders in it.
i have 4gb ram and 2 hard drives on my computer, one is 10000rpm 32GB velociraptor used as a system disk and second is 7200rpm WD 500gb! I want to move paging file to the second disc because of low space on system drive! I know how to do that but i want to know the correct way of doing this! Because some resources claims that it is good to keep around 1GB on the OS drive because Windows needs still some pagefile space on the OS drive i.e. url...somwhere i've read to left the minimum paging file on the system drive which is i mean 16mb and some resources claims that the correct way is to disable absolutely paging on the system drive and move it whole to the second physicial drive i.e. here: url...So which one of these ways are most correct? If i disable completely paging on the system drive it will not be a significant performance hit? How it is with paging in Windows 7 x64? What is your opinion and why it so? And finally how big static size of page file i have to set?