i have windows 7 width 2 partitions system C: and data D:,i set virtual memory size to custom 256MB on C:,but memory performance program reports page file size 3200MB,dxdiag reports 3200MB too,i set pagefile long time ago, so system is updatedC:/pagefile.sys has 256MBD: has no pagefile
View 1 Replies
I'm running Windows 7 Ult SP1 64bit (clean install) and would like to know what's the best way to set up the page given I have (2) HDD's? The drives are currently installed as follows:[CODE]
View 5 Replies View RelatedAfter I installed Windows XP Mode on a host with 4GB of RAM, Windows 7 Upgrade Advisor said there was only 3GB RAM. By default a VM is assigned 512KB. Does a VM use a page file? What made Windows 7 Upgarde Advisor think there was only 3GB when 4GB of RAM is installed?
View 2 Replies View RelatedKnow I have done a good amount of research and heard all different angles. I am going to test some of these things myself and time it real time with a stop watch! This tweak is mostly aimed at system performance for gaming but would like to hear the pro's and cons.Win 7 64x I have a Core i5 750 overclocked to 4Ghz and I have 8GB DDR3 1600, GTX 570 and a Velociraptor 300GB 10k RPM drive. So my system moves fast as it is.I was wondering if someone from Toms Hardware could do a definitve test showing the performance ganes and ideal setups.System ram (hardware) is much faster then a pagefile on any hard drive. Some programs want to have a pagefile but most seem to be like Adobe Photoshop.I have seen people say over 4GB disable page file.Set page file to 512MB with over 4GB of RAM.Setup pagefile on 2nd hard drive.Leave it to system managed on Win 7 because it handles it differently then WinXP used to and any tweaks make no difference.So again I can do my own personal testing but I think it would be great to have a full review to answer all these questions and put it to bed so to speak. I honestly think it would be very benificial to do an article then have information just posted in the forums.
View 5 Replies View RelatedI'm gettingthe same "out of memory" error message on Outlook 2007 running under Windows 7 (64 bit). Reading this thread, I checked my RAM and Page File Size and they are both ~6G... Should I REALLY increase my Page file size to 12G?
View 8 Replies View RelatedBetween WOW and FFXIV and some misc other things I only had 2 GB of free space on my 60 GB SSD so I lowered the page file which was eating about 12 GB down to 1024MB. Is this going to effect my pc at all? I have 8 GB of RAM
View 5 Replies View RelatedI have 32gb of ram, paired with a 128gb ocz ssd. I've heard about disabling page file or reducing the amount. Currently I've reduced it to 512 - 2048 and regained a lot of space on my ssd, which I'm very happy about. Any suggestions or fine how I have it?
Also, should i disable write caching?
Got a BSOD regarding PAGE_FILE.
View 4 Replies View RelatedAfter my computer has been running for some time (maybe days), it gets really slow. I found a great memory manager that cleans the memory. I was wondering if there was a way to clean the Page File without rebooting. BTW, I use Process Explorer so I know there is nothing running that shouldn't be hogging resources.
View 5 Replies View RelatedI have attempted to place my page file to an external disk via USB > I:, on my Win 7 HP system as I had on my old Vista HP system, to assist in performance.fter setting no (zero size) pf on C: going through the motions on re-start I get a message indicating that windows has by default created a pf on C:, (I take it this is for memory dump purposes) & on checking the external disk no pf was created although in advanced settings dialogue box a �system managed� text is indicated against drive I:, the funny thing is on C: the page file size was exactly the same prior to change even though no page file is indicated for C: in the dialogue box.I tried again leaving a 200mb fixed sized pf for the memory dump on C: but got exactly the same response, system managed pf on I: where no pf exists on the drive.
View 2 Replies View RelatedI just did a fresh install of Windows 7 Ultimate 64 bit on a SSD (120 GB Intel X-25M), and now I'm juggling with the dilemma of what to do with the page file. There doesn't seem to be a consensus on this issue from my internet research.Here's the situation as it stands: I have 8GB of RAM, and windows has created a 8GB page file.
1) Keep everything as is
2) Move the page file to another hdd (a WD caviar black)
3) Keep the page file on the SSD, but shrink it to 1 or 2GB
(Some people simply disabled their page file. I've ruled out this option as overkill)
a. Page file will will shorten SSD life span
b. counter-argument: maybe, but that is an over-blown concern for modern SSDs
c. If you have enough RAM (8 gigs is certainly that), the page file is useless
Most of my research was from 2009 threads and discussions though. Have things changed? Is there a better understanding of this topic now to render a verdict? I'm leaning towards shrinking my page file to 2GB (and leave it on the SSD) as a compromise between every concern.
Is it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
View 4 Replies View RelatedWhat are the drawbacks to not having a page-file (with 16gb of ram+SSD)
View 2 Replies View RelatedI have a computer with 6 gig memory in Win 7. I have 2 HDs. I have been reading about the Page File/Virtual Memory for years. It includes everything from none for 6 gig memory, 1 to 2 times regular memory, place in separate partition, place4 on 2nd HD
View 4 Replies View RelatedI just installed a new SSD. Should i disable or move the page file? I currently have it disabled.. My system has 24GB of ram.. If i should have it enable.. how do i tell it to use a different drive?
View 11 Replies View RelatedI'm running Windows 7 64-bit on a custom PC with Pentium Dual-Core 2.50GHz and 4GB RAM and have been having some "low memory" issues occasionally, seemingly due to Firefox hogging up memory.
So I looked at what my paging file settings were. They're currently set as "system managed": minimum 16MB, recommended 6141MB, and currently allocated 516MB. It says in Windows Help that it automatically sets the initial paging file as minimum four times the RAM plus 300MB, and the maximum as three times the amount of RAM. Obviously it hasn't set these parameters. My question is: should I change the settings manually to reflect these recommendations?
BTW: I have less than 1GB on the drive, so would Windows change the settings to reflect this, or does it allocate it separately?
just built a new i7-930 and installed Windows 7 Professional. With older versions of Windows I was told to put the swap file on another drive and to have the begining and ending sizes the same. Does this theory still hold true for W7? Looking for advice, I have 6GB of Ram on an Asus Rampage II Extreme MB.
View 15 Replies View RelatedI have been using Windows 7 for quite some while (2 or more weeks) on this new PC. Now...problem is, Task Manager shows a massive page-file usage. 1.40 GB used as soon as my PC starts (without loading any programs). I have 4 GB RAM, out of which, 3305 MB is usable (Microsoft licensing issues keep messing around with 32-bit Windows), and the page-file usage slowly gets to around 3 GB. I have 4 partitions on my 1 TB HDD, and I had 2-4 GB page-file on each. I disabled the page-files on all the partitions, but TM still shows a massive usage of 2.5 GB as I am writing this article. I mean, there's 4 GB RAM, and even without running any programs, it's still around 1.40 GB page-file usage.
I disabled Superfetch and the page-file on all the drives, now Windows is giving me out-of-memory errors. The only things open are Google Chrome, Windows Live Messenger, mIRC, Windows Media Player, Task Manager, Yahoo Messenger and Bit-Torrent, and none eat memory. TM is showing 710 MB RAM available out of 3304 MB, and 70 MB free. IDK what is using the RAM and causing this big a page-file usage. My PC is gone very slow, and it sucks. Any way to reduce this much disk-activity, and actually use the RAM? Nothing in the TM shows active (CPU is always at 0-5 %), so nothing is eating memory. What's causing this much RAM and page-file usage?
I watch videos from this site Poker Netcast | Live At The Bike | LABTTheir login is https.Ive been in IT for 15 years and even this has stumped me.When I go to login in IE9 starts looping from the login page to the https page and back to the original page and never ends. I load firefox, same issue. I load Crome, it worked for 1 day then same issue. It used to login in fine last week. It logs in fine on my 2 other PCs and my Kindlefire.I have checked for viruses with Avast and A-Malware Bytes in safe mode - nothing. These 2 pick up 98% of stuff. Personally I dont think its a virusn IE9 - Deleted browsing history, cookies, temp internet files, everything under the Geneeral/Browsing History section. Did a disk cleanup, put the site inthe trusted zone, turned off popup blocker just in case, Cleared SSL state, Reset IE9. Zippo
View 1 Replies View RelatedI am the proud owner of a Windows 7 Ultimate comp with 6gb ram, i7 920, etc... I have had this comp for about 1.5 years, and it has been slowing down... The bootup time has slowly been increasing, and the amount of time for me to actually be able to use programs once I see the desktop has increased. I have disabled all but the completely necessary startup programs/services, but this does not seem to work.
Whenever I start up my computer, sometimes I open task manager and check out the performance window and every time my computer is slow, I see the hard faults skyrocket. At startup, the thing is over the max shown on the graph for a while. To my knowledge, the hard faults/sec represent that the computer is either writing to or reading from the page file.
Anyway, down to the real question: Would disabling the page file decrease startup times, by forcing the computer to write everything to the ram, instead of tying up the already-slow hdd by writing/reading the page file?
Just this day my printer is printing out a sheet after printing what I want it to print that has the following information on it: filename directory template title author documents & settings how can I make it stop printing the extra sheet..
View 3 Replies View Relatedi have an intel i5 2400 cpu, combined with 4gb ddr3 memory. mobo is dh67bl - revision 3. no gpu installed.power supply is via corsair vx450.problem i been facing:
1) bsod saying that a clock interrupt wasnt recd. [url]
2) bsod saying: page fault in non paging area. couldnt grab a screenshot for this.
3) display randomly goes off for a split second and reappears.. but the color of the panes go blue (i havent chosen blue. my setting is for clear pane.)[url] this error solves itself after random number of hours/mins
4) display vanishes for a split second and reappears, and a small balloon at the bottom right corner prompts that the display driver had stopped working.
5) system plain hangs/stops responding. randomly happens.. but more so while on Internet, or after hrs of it idling, i come back to the comp and try to scroll the content onscreen.sometime it revives from the stuck state as if nothing happened, sometimes i have to give it a cold boot.
6) while reading forums with blue bands.. the blue bands kinda form blurry bars which stretch till the end of the screen. i tried to grab a screenshot but the screenshots were clean. the bands moved as i dragged the image about.
7) also, my comp's display went off one day and within a second came back with a blue-ish hue. it restored itself but again has gone back to blue-ish.
other relevant information:
windows 7 x64
no other os resides/installed on system
full retail version
os was installed in july.
I am installing more RAM in my system, and want to monitor the page file for improvement/reduction in size and use. Other than performance monitor, can I see the page file in either task manager or resource monitor?
View 1 Replies View RelatedRecently a popup box has started to appear when I logon that informs me that file nuneco.dll is missing/can't be found. I have not noticed any programs being affected but its just really annoying I also want to try and fix this before anything detrimental does happen as I use this system for my business. I don't remember doing anything major or installing anything before this started happening which is why I am hving trouble locating the cause of the problem.Any suggestions? Be gentle although I am not exctly a novice I am not a tech head either so if his can be fixed please provide clear instructions[CODE]
View 3 Replies View Relatediertutil.dll seems to be missing and I guess I can download it but all the places I look, seems like they want to do one of those FREE DOWNLOAD scan things that doesn't get you anywhere except now you got some crap on your system. Is there some source to get this stuff without the accompanying garbage?
View 9 Replies View Relatedim having a problem on flv video files on my video library.This all started when I run tuneup gain disk space it may have been deleted some file that something to do with thumbnail preview on flv files.Now flv files has no thumbnail preview...the player i use to play flv files is VLC.
View 9 Replies View RelatedI started up my computer around an hour ago and found the following message; "The file system32/hal.dll is missing or corrupt.re-install the file." So, at a loss as I'm not a Tech-person in any yway, I turned to the internet and found, after several XP posts, some to do with Windows 7. I'm on 64-bit, and have tried inserting my installation disk as well as the system repair.I've looked at this, but seeing as I'm Windows 7 & not XP I can't see why it would work; Error Message: Windows could not start because the following file is missing or corrupt I'm following another Microsoft guide that asked to me run a command in a command prompt, Bootrec.exe which in turn gave me 4 options, only I'm not sure which option to choose.
View 5 Replies View RelatedI received an email with an attachment showing as a pps extension, which is Power Point. Win Live Mail cannot open it. When I go to the file association panel, I have 3 extensions listed, to use Power Point Viewer (I do not have Office), but .pps is not one of the 3 listed ones. How do I add .pps to that list?
View 8 Replies View Relatedfile Missing ..what to do?
View 5 Replies View RelatedMy toshiba laptop says that i am missing d3dx9_32dll file? (note) already performed defrag and clean
View 2 Replies View RelatedI am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
View 9 Replies View Related
