Recovery Drive "D" Showing Heavily Fragmented?
Sep 14, 2011
periodically i run TuneUp 1-Click Maintenance. from day one, the D drive is labeled as the HP Recovery drive shows 92.56 percent fragmentation (heavily fragmented). I Googled this problem and it appears that this is somewhat normal and i should not defrag. when i used TuneUp 1-Click, in order to fix other problems shown, it wants to also defrag that D drive. is there a way to run TuneUp 1-Click so that it doesn't "see" the D Drive?
View 4 Replies
ADVERTISEMENT
Feb 2, 2012
I wish to get to the bottom of. After a system recovery last October on my Hewlett Packard PC due to some software causing blue screens, I have just discovered after defragging my main C drive, I have noticed that the "D" partition which holds all the necessary recovery info is just 2% defragmented. As nothing is written to this part of the disc I wonder how this has happened, unless it has always been like that. Usually when I do a recovery, I immediately turn off the "auto-schedule defrag" program so I can do it whenever I wish. But this time I didn't and obviously the auto-defrag has scanned that part of the drive at one time and reported a 2% fragmentation. It may well have been made like that! Or would it be worth a quick defrag just to get everything in order? The OS is Windows 7, and it is a single 640Gb hard disc.
View 4 Replies
View Related
Mar 29, 2012
I just got a new computer and this is my first experience with Windows7 and in Disk Fragmenter the recovery drive is fragmented 2% (it wasnt earlier) and if I click analyze or defrag the screen just flickers and ignores me
View 1 Replies
View Related
Apr 12, 2011
I have noticed a large growth in the use of SSD drives instead of Hard Disk Drives due to the boost of speed and now wounder: Do SSD Drives become fragmented like Hard Disk Drives?
View 1 Replies
View Related
Mar 4, 2011
I am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies
View Related
Nov 17, 2012
This is being used on PSP (File System is FAT32, was formatted on PSP itself) and had 26% fragmentation (6'6gb size of it). After copying all stuff I wanted to it (leaving 22% space) left all this fragmentation so decided to do a normal defrag (using defragler) since its going to need only 1 time as i dont plan to delete that stuff or replace it.
What is your opinion about if I could have gained any little performance on the memory stick doing this or not? Also didn't check yet if CCleaner can delete free space on this memory stick or not (not sure if this memory sticks store data like an HDD do so). Just doing a normal defrag on this memory stick took some good hours.
View 3 Replies
View Related
Feb 3, 2011
My 160 GB Win7 drive on my laptop failed (single partition), but thankfully I had a backup that I created on a 750 GB drive using EASUS Partition Master COPY. The backup drive is FULLY BOOTABLE, I've been booting into Windows 7 from an eSata external interface with no issues. It has a partition with my backed up Win7 installation and the rest is just unallocated space.
View 1 Replies
View Related
Mar 30, 2011
I am having something strange occur here:
Drive D: DVD/CD-RW Drive (D
Drive E: CD Drive (E
I only have drive D... How do I get rid of drive E?
View 4 Replies
View Related
Oct 9, 2011
i just got myself a new hp computer with Windows 7 x64, but when i insert any type of cd, it doesnt show up in my computer and doesnt start by itself.
View 3 Replies
View Related
Jun 24, 2011
In My computer C Drive is showing red color. But there is enough free space. find the attachment.
View 4 Replies
View Related
Sep 30, 2011
My cd rom drive is not showing as a unit and is not responding the pc suggests that I have driver problems.
View 3 Replies
View Related
Jan 6, 2010
I have a Samsung R519 laptop, after installing windows 7 the dvd drive is not working. It is not shown in the device manager. Sometimes after a reboot it does appear in the device manager and I have tried to do the repair as stated on other forums, (remove upper and lower filters), but on all occasions there has been no upper or lower filters shown in the right hand panel. I know it is connected ok as I re-installed Vista and now have both OS and the dvd drive works ok in Vista.
View 5 Replies
View Related
Feb 13, 2012
I've got a WD My Book 1110 external hard drive, originally for Mac. My Mac died and so I got a Windows 7 machine. I extracted all the data, reformatted the two partitions I had on the drive, and moved the data back onto it. The partitions showed up with letters, all was fine, until I restarted my machine. Now I can't access the drive. It shows up in Disk Management, lists the properties, but the drives aren't assigned letters, they don't show up in Explorer, and Disk Management says the partitions are 100% free. Also in Disk Management, when I right click on the volume, all options are greyed out except Delete. Taking some clues from the internet, I've already tried uninstalling the drivers (it says they're up to date, and said it reinstalled them fine, and that the drive was ready to use, except it still doesn't show up.)
View 1 Replies
View Related
Sep 18, 2012
I have a gateway computer running windows 7 ultimate and im trying to add another hard drive but its not showing up anywhere. My primary hard drive is a 3.5 sata 500gb and im trying to add a 3.5 IDE 200gb hard drive. I've looked in computer management and everything but the hdd is not showing anywhere.
View 3 Replies
View Related
Jan 12, 2011
I'm new to Windows 7 (Ultimate) and like to have a machine that runs nice and fast with no unessential items running in the background. Last night I did a bit of tweaking (mostly in gpedit.msc) and went a step too far, but I'm not sure which step I need to undo and haven't been able to find a solution in a 4 hour google session.When I click on My Computer, the cupboard is bare.I have a 500gb drive partitioned into C: and D: and a DVD drive E:The right pane is empty, and when I plug in a USB drive it doesn't show either. When I click on libraries, I can manually enter C: or D: in the address bar but it's a bit inconvenient. I usually use Total Commander rather than Windows explorer, but it's been difficult to set up my downloads location etc as they don't appear in the available options. In device manager the disk is showing.
View 6 Replies
View Related
Nov 10, 2009
I did a clean install of windows 7 ultimate 64 bit and everything seems to be fine except that in windows explorer it is showing an extra CD-Rom drive that I don't have.
i tried uninstalling both of my dvd burners (1 ide & 1 sata) and that didn't solve anything.
the drive doesn't show up in computer management/storage/disk management.
i guess this isn't really hurting anything but it is very weird and i'd like to get rid of it as it is rather confusing.
View 2 Replies
View Related
May 4, 2011
I am using Windows 7 enterprise modified like windows 8 and my CD ROM DRIVE is not showing up in my computer. My cd boots when starting up but not showing on my computer. I have went into cmd prompt > regedit > HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Class > {4D36E965-E325-11CE-BFC1-08002BE10318}(CD ROM CLASS) and there was no uperclass filter or lowerclass filter available so I could delete them.I will be really happy if you could tell me anything else I could try to get my CD ROM DRIVE back.
View 4 Replies
View Related
May 27, 2011
my dvd drive is not showing windows 7
View 1 Replies
View Related
Mar 12, 2012
my dvd drive is not showing on my computer,i have inserted a pd full of viruses nad my pc doesn't have any anti-virus...
View 7 Replies
View Related
Jul 9, 2009
I have two SATA harddrives 0 and 1. I had Vista on firsst partition on 1 dual booting with XP on 0. When I came to load W7 it did not see drive 1 so I ended up booting it on a partition on drive 0. It is still a dual boot installation.
The problem is that W7 still does not see drive 1 (visible in XP and previously Vista)
It is not visible in computer management or elsewhere. The drive has 3 primary partitions none of which are logical.
View 2 Replies
View Related
May 29, 2012
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies
View Related
Aug 3, 2011
I just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
View 14 Replies
View Related
Apr 28, 2012
My C drive is showing that i have 1.6 GB of empty space. But when see the the contents by opening C drive and selecting everything and doing a space check i see only 86 GB of space taken up. My C partition is 100 GB and I have my page files are on a different drive. So pagefile.sys cannot be a problem, could it?
View 3 Replies
View Related
Jun 3, 2011
I have a 2GB Transcend pendrive. When I plug it in, it is detected by windows and it shows up in Computer>Manage>Disk Management. But it does not show up in explorer and it doesn't work even if I try to enter the drive letter in explorer..Screens:The pen drive shows up like this in disk management.But when I try to access it using the drive letter in explorer. It shows this message:
View 12 Replies
View Related
Apr 1, 2011
I bought a M1530 on the cheap a few months and installed Win 7 x64 with a lot of research primarily from here. Everything worked perfect. The drive is a Teac DVW28SLC. It's a slot load and the only eject button is with volume and DVD controls above the keyboard. I needed to burn something to DVD. I decided to try Imgburn for the software.Installed it, popped a fresh DVD-R in. DVD drive recognized the blank. I usually reboot a computer before burning, realized I didn't so I rebooted. Now, the drive no longer works.
After the reboot:
-Drive is visible to bios.
-Drive cycles on boot up, checking for a disc.
-Drive is not visible in explorer
-Drive is not visible to diskmgmt.msc
-Drive is visible, not disabled and properly installed in the device manager.
-Card reader also seems to not be visible either but is showing up in device manager.
-Disc will not eject from keyboard button.
Things I've tried to fix it:
-Several reboots.
-Uninstall Imgburn.
-Uninstall Daemon Tools Lite.
-Uninstall Drive in Device Manager, then reboot.
-Uninstall Drive and ATA controllers then reboot.
-Delete upper and lower filers at HKLMSYSTEMCurrentCOntrol SetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}, no entries were present.
-Reinstall chipset drivers, though I don't think Intel installer changed or installed anything.
-Fixit does not work.
View 7 Replies
View Related
Aug 30, 2011
Bought a LG Blu-ray internal sata rewriter. Installed it and windows 7 found it first time. So far so good. Put windows into sleep mode and when I woke it up the sata drive was missing. The drive was not only missing, but the tray failed to manually open and the activity light did not illuminate. Drive totally dead. Check all power and sata cables all ok. Done a full reboot and drive came back ok. This only happens when the machine is put into sleep mode. Sata drivers all up to date and all cables 100%. Turn the machine fully off or restart and everything works ok each time. Use sleep mode and it fails when you bring the m/c to life.
View 9 Replies
View Related
Jan 16, 2012
I just noticed it today, but there is an extra drive in the My Computer window, I use TrueCrypt as well as a hot swap bay for a SATA drive.When I try to open it, the drive says Not accessible, Access is Denied. Disk manager and Disk Part all only show my 5 physical drives that are indeed there.How can I get rid of this extra drive?
View 1 Replies
View Related
Mar 23, 2012
I have a problem My 3TB Western Digital Hard Drive is not showing up on any PC I connect it to. The light on the drive itself is on, but no where on the PC does it register.
I am pretty sure the disks aren't spinning either, but that is probably because the computer isn't picking it up, and no vice-versa.
View 5 Replies
View Related
Jan 12, 2010
So I recently purchased and installed a new hard drive in my PS3. To do that I had to reformat my Western Digital 250 GB hard drive to FAT32 format. Ok, so that's all well and good but I then decided to take my PS3, 60 GB HD (the brand escapes me, but it's a big manufacturer of hard drives) and put it in an external hard drive enclosure. I figured that it's a perfectly good hard drive so there was no sense wasting it. Anyway, as technologically impaired as I might sound after this (which I'm really not) I feel compelled to divulge that I actually did not know that two external hard drives shouldn't be too close to each other. As soon as I put one on top of the other, the 60 GB hard drive beeped and a message popped up saying it needed reformatting. So after reformatting everything a second time, I plugged in the hard drives and the 60 GB one showed up but my 250 GB one did not.
It's showing up everywhere else (disk management, device manager) but not in My Computer. So I have no access to it at all. Also, I did not need to reformat the 250 GB HD since my computer gave me no message indicating that I should. I'd rather only use reformatting as an absolute last resort since it takes HOURS but if it's necessary that I'll have to break down. Throw other options at me first though
View 9 Replies
View Related
Jan 12, 2013
I bought a M1530 on the cheap a few months and installed Win 7 x64 with a lot of research primarily from here. Everything worked perfect. The drive is a Teac DVW28SLC. It's a slot load and the only eject button is with volume and DVD controls above the keyboard. I needed to burn something to DVD. I decided to try Imgburn for the software. Installed it, popped a fresh DVD-R in. DVD drive recognized the blank. I usually reboot a computer before burning, realized I didn't so I rebooted. Now, the drive no longer works.
After the reboot:
-Drive is visible to bios.
-Drive cycles on boot up, checking for a disc.
-Drive is not visible in explorer
-Drive is not visible to diskmgmt.msc
-Drive is visible, not disabled and properly installed in the device manager.
-Card reader also seems to not be visible either but is showing up in device manager.
-Disc will not eject from keyboard button.
Things I've tried to fix it:
-Several reboots.
-Uninstall Imgburn.
-Uninstall Daemon Tools Lite.
-Uninstall Drive in Device Manager, then reboot.
-Uninstall Drive and ATA controllers then reboot.
-Delete upper and lower filers at HKLMSYSTEMCurrentCOntrol SetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}, no entries were present.
-Reinstall chipset drivers, though I don't think Intel installer changed or installed anything.
-Fixit does not work.
View 7 Replies
View Related
Feb 9, 2011
Shared XP drives are shown on Windows 7 machine but are not accessible. The following are done for trouble shooting:
1) Shutting down AV and firewall
2) Clean boot
3) Safe mode with network and
4) Turning off "password protected sharing" on Windows 7
View 3 Replies
View Related
