with my gpu Radeon HD 5570.It's working fine but every time i shut down my pc and want to turn it up again, I wait 5 minutes only for the gpu to turn on,then the system boots and everythings ok. With the old gpu Radeon HD 4350 I had no problems like this,it turned on normaly with the system.
View 1 RepliesI want to disable acceleration in Ati Radeon hd 5570, but I can't find it in Catalyst Control Center (because I can't do it from normal windows setting >>).
View 1 Replies View RelatedSo I play Starcraft 2 and Diablo 3, the desktop is stock from Dell with ATI Radeon HD 5670 1GB video card. It plays fine for 2 hrs or so then the screen would freeze for about 3 seconds and then the screen goes black for 10 to 15 second. Sometimes the game recovers sometimes the PC would crash.FYI I am a computer newbie. Below are my set up.
[code]...
I have a Dell Optiplex 745, core 2 duo, with an ATI HD5570. When I attempt to install the drivers, I get a blue scree when it is in progress. I've installed 2 other cards without any issue. When I google it, I get quite a few answers spread amongst different machines. I'm just not fully understading
View 2 Replies View RelatedMy son-in-law and I both purchased new Gateway computers last July with Windows7. I created system repair and recovery disks however; he knows very little about computers and didn't do the same. I will have to admit I know little about the system recovery process since I have always had a windows installation disk for previous computers and have not had to fall back on the system recovery process so don't know exactly how it works.I told him I would assist in creating a system recovery disk for his computer but wonder if it is too late at this date?
View 4 Replies View RelatedLast weekend I switched from Vista to Windows 7. Unfortunately I noticed some problem with my external USB drive: WD MyBook 320 Gb. When I log in, in 75% of trials there is a pop-up that new storage device was found (the same when you put USB flash into your PC).
Strange, because the disk is plugged into USB all the time... It means that when I log in just for a second the system does not see the drive, which has some some nasty consequences:
- shortcuts directing to files on external drive are damaged
- outlook cannot open archive folders on external drive (I have Outlook in autostart)
- at startup system cannot reopen explorer windows (path not found)
- etc.
After this faulty second everything is normal, i.e.disk are discovered properly and the are working well.
I tried to turn on login password (to give system more time), but it didn't help. This issue appeared neither in XP nor in Vista. Then I played with msconfig and unfortunately it didn't work. When starting in selective mode (startup items off, all non-Microsoft services off) approx. 50% trials
I think that folks at MS wanted Windows 7 to boot faster so external usb drivers are initiated after logging in.
resulted in the popup.
Is there any way to make system discover external drive sooner?
I have set the TV recorder defaults to start recording 15 mins early and still, the recordings are beginning late!As a result I miss half of the show and have to delete it.It seems as though the time for the shows are wrong from the guide data e.g. it will say X show starts a 8.06pm instead of 8pm.
View 2 Replies View RelatedI don't really like playing game since start of 2012. But when I play games, when I hold the W button for a pretty long period, the games still thinks I'm holding the W button for a short period of time. This happens in any games. Need For Speed, Counter Strike, Assassin's Creed, etc.
My laptop specification, just in case if needed:
Acer Aspire 4750G
Intel Core i5 2410M @ 2.30 GHz
Nvidia GeForce GT 540M Cuda 1 GB
8 Gigabytes of RAM
my Toshiba laptop screen stays black, my laptop turns on but the screen stays black, I have tried many steps and none has proved, I wonder if it has to do with a cable or is the screen that needs to be replaced.
View 5 Replies View Relatedi am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to restore them, so i do that and then the computer works fine, but then when i turn it off and turn it back on it does the exact same thing until i get that message again.i've tried manually reducing the clocks on my cpu even though they were already at stock clocks and that didnt work
system specs:
windows 7 ultimate 64bit
intel core 2 quad q6600 @ 2.4ghz standard clocks
4gb ddr2-800 ram
ati hd 4760 1gb ddr3
I have a Compaq-CQ5302F,when I turne it on it goes right back off. The motherboard is Pegatron(Evans)?
View 2 Replies View RelatedI am aware of the fact that my current gfx cards may be low end for DNF (Radeon 5750x2) but what is happening is that the game shuts down the monitor ingame. Like shutting down the signal (?). This occurs anytime from 5 minutes in to the game up to 30 minutes or so.
Only solution to get signal back is a hard reset.I have set up a GPU monitoring software (AMD Overdrive) to measure temps and will post logs here later, my intention with this post is to figure out any other verification measure I might take to verify that this is indeed this game overloading gfx cards?
I run build 6956 and I am impressed with new Windows. Just one problem but big (also was on 6801 build) screen on mine hp 8510p notebook never goes dim or switch off, even when I define those times in >Display...
View 9 Replies View RelatedMy first guess was that since we have an electrical instability in our home, perhaps the uneven flows of power would sometimes send a false signal to the power unit of the computer and trigger a start-up (quite often the lights in our home will briefly, and sometimes violently, wave up and down, especially at night).
View 3 Replies View RelatedWhen I turn my PC off, it turns on by himself. Only when I remove cable from electricity I can solve this problem. This problem started to show up after I changed video card. What reason could it be for this problem and how can I solve it?
View 9 Replies View RelatedI recently changed my PC's power supply, but when I arrived home and turned it on, it turned off by itself a few minutes after booting the OS.Now every time I turn it on, after a few minutes it powers down again while booting.
View 2 Replies View Relatedso basically most nights when i go to bed i will put my computer on sleep, but recently my computer has been turning itself on during the night, i checked task scheduler and there is nothing there that would trigger this, although i tried the powercfg lastwake command in command prompt and got this
View 1 Replies View Relatedi just got my pc on july 24 and never had many problems with it but now it shuts off and turns back on. please help because i don't know what to do and im in school.
View 2 Replies View RelatedRecently my computer started to show signs that the power supply wasn't working properly. Every time it was unplugged and plugged back to the outlet, a light in the back will blink and make a clicking noise. Two days ago it did it again, when I unplugged it and plugged back in. I unplugged everything from the computer and try turn it on, but it didn't work. I checked all the cables inside and everything seemed to be connected properly. I unplugged the main cable from the motherboard and plugged the power supply and light at the back stopped blinking and remain lit. I decided to plug the motherboard cable. After doing that, the computer started but now it won't boot. All fans are running and there are no clicking or beeping sounds.
COMPAQ Presario SR5210NX
Windows 7
i am facing a unique problem. I recently installed windows 7 ultimate 64 bit on my pc. the pc runs normally for about 30 to 45 mins. but later monitor turns off with a "no signal" indication. but when i check, the processor is still running. then to get the signal back again, i must restart my system. then after boot up, i get the message saying windows was not shut down properly. i am not able to understand what is creating the problem. is the problem with hardware. or with windows 7. i never faced such kind of problem before when i was using windows xp SP3.
View 5 Replies View RelatedMotherboard: MSI Z68A-G45
Nvidia GTX 580 (Latest 285.62 Drivers)
Windows 7 64 Bit
I've had this computer about 2 months and everything was working great until today. This problem started out of nowhere. I didn't mess around with drivers etc.
Anyway, when I switch on my computer, the bios screen loads up..followed by the Windows 7 loading splash screen. Then just when the welcome screen should appear, my monitor turns to standby and says that it's not receiving an input signal.
I booted in safe mode and removed the drivers. I restarted my PC and it worked and my desktop appeared. However when i install the drivers again and restart the computer as required by the driver installation..the same problem as above reappears.
My monitor is connected via a HDMI cable to the GTX 580.
EDIT: When I go to device manager and right click the GTX 580..there is an option to roll back drivers. I clicked this and it now shows as a VGA Adapter. I restarted and my computer booted up...but obviously in low resolution as no previous drivers were ever installed since i bought the PC with up to date drivers.
I also just installed 290.53 BETA drivers. Restarted and my computer now just hangs at the welcome screen. I can still boot in safe mode which is how i'm managing to write this.
i hav this friend of mine whose computer turns off itself few seconds later after turning it on,it has been running perfectly before this,until he installed another 1GB DDR2 ram..i cant figure out what the problem is.
View 4 Replies View RelatedI have a Packard Bell Easynote TJ74, i bought it will a defect screen as i was planning to use my tv as the external monitor. For a few months it has worked perfectly. One morning i turned the laptop on and the laptop turned on with certain lights, but did not boot up and the screen which usually just has a white light did not show either, the hard drive lights did not light up but the heat sensitive buttons do work and light up but it's almost like the laptop is on but nothing is happening inside :S. I have the power supply constantly plugged in but the battery is not being used as don't want to over charge. After turning the laptop on and off multiple times it will finally start up correctly and the screen will light up just with a white screen and it will change over to the TV correctly.
View 1 Replies View RelatedI recently bought an ASUS X54HY-SX060 laptop.
I installed Windows 7 on my own and started installing drivers. At first, I downloaded and installed drivers for ASUS x54h laptop, not x54hy because it says ASUS X54H on the sticker on the laptop.
I figured it out I was installing the wrong drivers so I installed new ones. Everything was fine, until for the last few days.
I turn on the laptop and everything is fine until the desktop shows and then my screen turns off. It's completely black. I have to restart my computer (sometimes few times) in order to work. I tried reinstalling the drivers. I completely deleted them with DriverSweeper and installed them again. I tried repairing the Windows, but the problem is still here.
I'd like to solve the problem without reinstalling the Windows (but I will do that if it's necessary). I googled the problem many times without finding anything useful.
Since about 1 month my PC turns randomly off. Sometimes after 10 hours, sometimes after 2. Mostly when in Idle or when I'm watching movies on a second Monitor (TV but it also crashes if it is unplugged so thats not the reason). Sometimes when I try to boot again it wont start except if I turn off the PSU for ~15 seconds. Sometimes when I reboot there's an error message "Asus Anti Surge was triggered".
I already tried:
- Replaced my OCZ ModXstream 600w with a Corsair AX750 PSU
- Stock settings in Bios
- Asus Anti surge deactivated
- Changed the power outlet to another one
My hardware:
i5 3570k @4,3 GHZ
Asus Sabertooth Z77
GeiL Evo Corsa 16GB
Sapphire AMD 6970HD
2 Harddisks 250/500gb
1 SSD OCZ Agility 3 120gb
And like I mentioned 2 different PSU's.
OCZ ModXstream 600w
Corsair AX750
I performed a new 32-bit install of Windows 7. For some reason, the monitor shuts off when windows starts. I found that after Windows boots, if I hit the "sleep" button on my keyboard, allow the computer to sleep, then wake the computer, the monitor turns on and everything is fine. Why would they force a person to put the PC into sleep mode every time the PC is booted? I have a PC with a Gigabyte GA-MA69G-S3H motherboard (AMD 690G chipset). I'm using the integrated graphics and I removed everything from the PC except for the drives, monitor, and mouse.
View 5 Replies View RelatedMy Laptop screen turns off when I close the lid also I have edited the power options and the plan settings and I choosed to never turn off the display?
View 5 Replies View Relatedi have installed 2 case fans to have to air flow. and when i booted the pc couple of mins later, it suddenly turns off. i unplug both of the case fans and did the same thing.
View 6 Replies View RelatedMy graphics is a GTX 460. I built a new computer on the 10th of january and up until tuesday the 17th everything has been running perfectly. But on tuesday my graphics card driver would continuously crash and then recover.Now my graphics card has started to turn off completely, and the computer would reboot. This mostly happens while playing a game. But it also happens while browing the internet too.I've my graphics card in my old computer right now, and everything seems to be running fine.
View 9 Replies View RelatedI have a windows 7 os that on bootup gets to the logo then it turns the monitor off so that it says no signal. I can hear the sound of it booting up...no signal. This is a 30 day old build that has been working perfectly. I used the onboard graphics card...same results. Everything works in safe mode(where I'm typing from now)but I cannot access much. I placed this post here because I only had this problem after the latest update(even though I'm not sure they are related). I had already tried to repair/and restore...no affect.
View 9 Replies View RelatedSometimes when I power-up my pc everything goes on (fans, HDDs, MOBO..) 2-3 sec later it shuts (won't even get to the bios boot screen) then few seconds later it will turn itself on and stay on (log into windows..)
View 9 Replies View Related