Yesterday, my PC hangs and after I reset, the NIC is not connected, as if it does not have a network connection, which is usually connected as my connection (physically) is always connected. After some test, I've discovered that if my PC is connected to my wireless router through the wired connection, it's not working(used to work), not even in switches anymore. The only setup I've got a connection is when I connect my PC directly to my ADSL router, or if it is connected to another computer (PC-PC connection). My concern is that, I need to be connected to my home network.
These are the scenarios I've tested :
*Directly connect the PC to ADSL router (work)
*Directly connect the PC to another PC (work)
*Connect the PC to a wireless router (don't work)
*Connect the PC to a switch (don't work)
*Changed cables then connect the PC to wireless network or switch (don't work)
*Connect another computer to the same port,same cable, same router and switch (work)
*Connect the PC to another wireless router and switch (don't work)
*Connect other computer to another wireless router (work)
*Reformat PC to Windows and after installing LAN driver(don't work as soon the driver is installed)
*Tried Linux live CD(don't work)
I've tried 4 different wireless routers and a switch in these tests and even tried flashing the BIOS. One more observation. From total shut-off (cables unplugged) as soon as I plug in the PC, the NIC LED is lit(connected to the wireless routers). but, after loading the OS, the LED became unlit. As I conclude, it is a hardware issue. Do it need a flash? or something else?
Hardware Specs:
MOBO : ECS G41T-R3
NIC : JMicron PCI Express Fast Ethernet Adapter
As I've checked resources tab. The resource settings has these values.
Memory Range FEBFC000-FEBFFFF
I have an Asus G73JH-BST7 Laptop and recently it's been freezing. For the past two months it has had issues with programs hanging for 1-3 minutes then quickly responding again. About a week ago the laptop began to freeze and wouldn't come back and would required a hard restart. I decided to make use of my warranty and took it into a geek squad store. They told me they ran chkdsk and "other" tests to check the HDD and it passed all the tests and they couldn't "Replicate" the problem. So, I took the laptop back and it's still hanging/freezing. Whats the best way to go about diagnosing this?
I have a Toshiba Laptop that after installing Dragon speech hardware somehow after shutting down my laptop it lost the password.Therefore I cant boot my laptop. How ca I reset my password without having a flash drive equipped with a reset wizard?
i have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.
I had to reset my computer to factory settings a while back. I've done nothing to it except download advanced system optimizer and windows antivirus. This was a miracle alone due to the fact that my Computer locks up for extensive periods of time and will barely ever finish a task; such as transferring a picture to USB drive, scan, or any click command. It has never done this before the reset.
I just noticed this that when you open the network from the desktop it says its not connected but when you click on the network icon in the taskbar it says its connected is anyone else having this problem.
I've been using wireless internet for months with my new computer which has Windows 7 64-bit. Today I disabled the wireless security for a bit, then tried to enable it, now I can't connect to anything. The problems are: 'The DNS server isn't responding' and 'Local Area Connection doesn't have a valid IP config'. My wireless icon keeps switching between a yellow exclamation point icon and a circular blue loading icon. It says it's connected but I cannot browse the net, I can access my router information though. My router/modem are definitely on and connected. I've done many power cycles on those and my computer. My modem is Comcast and my router is a Netgear WPN824 V2. The router has the most recent firmware.
Here is my ipconfig data:
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersVector03>ipconfig Windows IP Configuration
Recently the power went out in my house. Ever since the power has come back on, I haven't been able to use my wired internet connection. When I look at my devices, my Intel 82566 Gigabit Network Connection has the status "This device is not working properly because Windows cannot load the drivers required for this device." I've tried re-installing and updating the driver, but I can't tell whether I've done this successfully. In any event, it still doesn't work.
I have a Dell XPS 410. Let me know if you need any other information.
I bought a Windows 7 machine today. I went home and plugged the ethernet jack into the computer - it finds the connection, but won't connect to the internet. The wireless works fine. The wired works on my old vista machine. I went over the a friend's place - same deal, and their new Windows 7 machine doesn't work in the wired connection either. We are both Shaw cable subscribers in Western Canada.
I have tried restarting, disabling/re-enabling the drivers, updating the connection drivers. I can't think of anything else - suggestions?
I have a Sony Vaio with windows 7 OS (64bit), I have installed and ran several differnet antivirus and malware programs and found nothing. I ran a full virus Scan (Kasperksy anti-virus 2012) and no issues found, I tried to do a System Restore to earlier date (it failed), I can see that i have an issue with the WAN Miniport IKEv2 (It will not deinstall...to try and reinstall...it just errors), I get "Diagnostic Policy Service not running" every time i try to trouble shoot. I have even performed a system scan, (cmd.exe....cfs/scannow) and it found nothing. I even bought a new USB wirelss adapter to try and get online and it doesnt work. I have tried to log on to the internet at work through our network as well as at home through my home netowork (two different providers) and nothing works
I've been searching around for a fix to my issues but I cant seem to find one so Ill try just taking a stab in the dark and seeing if anyone will reply.
Now..
I am using my on-board RTL8168C NIC to connect to a Netgear DG834Gv2 using a cat5 cable. My network connection state varies from full access to none at all. Sometimes I turn the computer on and it works fine, other times I have to disable then enable the NIC 5-10 times and eventually it works.....then doesn't work.
It also appears that when all the planets align,and for some reason or another I can actually get on the network...that the NIC gets "overloaded" with information then just disconnects me. Say for example, I can go around facebook and google, that sort of thing fine (when said connection is working) but say if I want to load up something like World of Warcraft it appears to break my connection.
I have tried using Gigabytes drivers on their webpage specific to my mobo, I have gone to Realteks website and used their latest drivers and I have also just used the bog standard windows 7 drivers, it appears when I do uninstall the device and then reinstall it with one of the drivers the device appears to work but then after 5-10 minutes maybe, the device fails me again.
I've been reading around and I have disabled the Bonjour service and set up the network as "Work" network.
This issue seems to come and go too. It appears to hang around from a day or 2, somehow repair itself and be fine for another 2-3 weeks and break again. Actually since Sunday I have been having this problem, Saturday I was pretty much downloading all day at my max 150kbps (Go go Australia's amazingly fast internet ) no problems at all.
We have 2 other computers on the network, 2 laptops, One using 7, the other using Vista, They do not have any issues at all.
Anyway, here are 2 IPConfig's One where my network connection is fine, The other where it is broken.
Alright, so I just did a fresh install of Windows 7 build 7086 x64. Everything works just find, except my network adapters. I'll detail system specs after I explain the problem.
When i connect one of my cables, the computer attempts to identify the network. It doesnt. I check IPconfig, and it gets all DHCP information from my Linksys router, but no internet connection. I have IPv6 turned off on both adapters, as well as the VMnet adapters i use for VMware Workstation.
I attempt to ping google.com and it comes back, ping request could not find host
I attempt to ping the router, and says host unreachable.
(IPconfig data - Local Area Connection 2) (Local Area Connection 1 shows up the same with IPv4 Address 192.168.1.102)
Connection-specific DNS Suffix : oxfordnetworks.net
IPv4 Address : 192.168.1.103
Subnet Mask: 255.255.255.0
Default Gateway : 192.168.1.1
The Gateway itself sees the Win 7 computer, but when i ping from the router to 192.168.1.103, it times out.
Also, I attempted to update the network drivers using the Intel Pro v14 Vista x64 drivers, and the installer wouldnt let me install the drivers because of "software not built for your operating system".
Just bought a Lynksys router wrt160n to use with my wired windows 7 desktop and my wireless windows xp notebook. The notebook pickup up the signal, but we could not get past the authentication point. It wouldn't connect. Router worked fine wired with the windows 7. Any simple worded help for a beginner?
i have a pc running xp wired to my modem. i have another running windows 7 that connects wireless to the router. i can connect to the internet from the wireless w7 pc but as soon as i try to stream or download i lose connectivity.
The output of the "print route" command on my Win7x64 system is shown below.The wireless adapter has been assigned to 198.168.2.72 by the router and the Gigabit wired connection has been manually assigned the static address 198.168.2.8The strange thing is that the gateway metric which I believe is used to decide which connection to use is 25 for the wireless connection (i.e. fast) and 276 (i.e. slow) for the gigabit wired connection. But I expected this to be the other way around. Why does it think the wireless onnection is faster? Does this mean that network traffic is generally routed thru the wireless adapter? Is there a way for me to tell which adapter is being used to route traffic?Should I believe its reported speed, or should I force the metrics so that the wired connection is used by default. If so, what commands are used to force this priority, and do these commands need to be repeated after every boot, or are the permanent?
So I have laptop and I have wired internet.Yesterday its just stoped working
-IPv4 connecitivty No internet access -IPv6 connectivity No network access
When Im trying to detecting problems Troubleshooting couldnt identify the problem.Now It says Your computer appears to be correctly configured ,but the device or resoucre (www.miscrosoft.com) is not responding.when i type ipconfig/all its say Windows Ip configuration.
I've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from c:windowssystem32drivers), but it still blows up every time I've gone to the Microsoft site and downloaded the drivers there too. Basically, I install the Accessories part, and that's fine. Then when I plug the controller in, it takes about 3 seconds and then BAM. BSOD. Upon restarting, if I plug it in, it doesn't BSOD, but it sure doesn't work either. Oddly enough, the MotionInJoy driver reappears in the system32/drivers folder occasionally after a BSOD.
Hey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
Recently purchased an older wired Xbox 360 controller to play emulated retro games on my netbook. From the research I've done, windows should install the correct drivers when I plug the controller into my USB port, correct? Absolutely nothing happens when I plug the controller into the computer. I'm new to PC so I'm sure I'm making a simple mistake. I've downloaded the Xbox 32Bit controller software from microsoft and still nothing. I see nothing in device manager or anywhere else on my computer. The controller doesn't light up when I plug it in or anything
Im using a Vodafone dongle so no router. I have connected the two via ethernet cable and the connection is there but "no network access" is below the Unidentified network. tried a couple of different things but no luck.
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
i'm having trouble getting onto the internet with my wired settings on my desktop. I usually have it connected through wireless (I have a pci-e wireless card), but when i try with my ethernet cable, it doesnt connect. I have two OS's installed on this computer windows 7 and vista. I have tried to on both windows to get on the net, but to no avail. I have tried the diagnose and repair, but it doesnt fix anything. It does however, says "Windows cannot connect to the primary DNS Server" or something like that.
Just did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC Primary DNS suffix.......... : Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
I have AT&T U-Verse with a 2Wire (3801 HGV) router. I've had the service for about a month without any issues. As of now, I am able to connect to the internet using WiFi (via my Wii, iPhone, and Laptop), but when trying to make a WIRED connection (via ethernet cable from the 2wire router directly to the PC), all I get is a yellow icon.
If I unplug the ethernet cable and plug it back it, the blue circle appears for a while, then back to the yellow error icon. In the Network and Sharing Center, I am showing my PC with a broken connection (yellow triangle) to "Unidentified Network with a broken "red X" connection the Internet. I thought maybe it was the ethernet cable, so I tried a wired connection from the router to my laptop (also running Windows 7) and it works just fine, so I've determined it must have something to do with the PC itself.
I've tried doing a system rollback, resetting the router itself, made sure the network driver on the PC was up to date and ran the test to make sure it's working properly.....all with no luck. I've tried using Windows to diagnose the problem and I get "Problems Found: Local Area Connection doesn't have a valid IP configuration". What baffles me is it was working fine up until a few days ago.
I need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
Background; home built computer 8gb ram all tested individually, 1.0tb hdd tested, popped in new 1.5tb hdd, tested power supply, 5 fans (no overheating issues), popped in new network card, tested disk drives.Computer runs Comodo firewall, Avast antivirus, and tune up utilities. I was online one day and 20 windows opened up at the same time computer rebooted bsod. that day computer rebooted about 10 times. at first i was able to go online but soon afterwards no internet connection (red X on icon).I tried to scan and the computer would reboot in the middle of scan (All different types of scans safe mode safe mode w networking normal). I was on the ph w a tech from avast for three hrs we ended the conversation by him telling me to internet provider, did that spoke w that tech for two hrs. I uninstalled avast. Every time the computer starts comodo message comodo does not seem to be started or installed. fix doesn't work. I kn it is my computer that will not allow a connection to internet. I cant release /renew rpc server unavail So I took out hdd and put in a new one to do a clean install no luck win 7 enterprise error 0x80070570, 0xc0000005, then it said 0x7717b099 ref memory at 0x774ae76f memory could not be written. I decided to put old hdd in and combat the problem. Message Diagnostics Policy Service not running.
