I am running Win 7 Home Premium x64 and IE9. The freezes seemed to start when I changed from Roboform to LastPass. The freeze happens when I get a dialog to generate a secure password. System freezes. Sometimes it will come back after 15-30 seconds or more. Sometimes I have to crash out to get control back. In checking the event viewer the only entries about that same time are 8032 and 8021.
View 1 RepliesI have a problem with my 2yeard old HP pavillion dv966ea. I recently upgraded to windows 7 , and everythingh was good for about 2weeks, now it suddenly crashes and I get the same Kernel Power critical error as some other people mentioned. It crashes randomly, sometimes not in hours...but always when I'm starting a certain 3D client poker software, it freezes and I have to use the power button...after the restart even the HP logo at boot up is sometimes in colours. the only way to get back to normal is to run in safe mode and than restart. that normally seems to do it.I did a lot of research on that, reading all the related articles on this site as well, so here is what I tried so far.Clean installed Windows 7 (7600)tried with or without updatestried all the drivers on HP website and experimented with Nvidia driversupdated realtek audio driversit would be great to know, if this is software or hardware related.(don't have warranty anymore) computer never crashes with the pre-installed vga-driver, but I can't run the poker software with it. My guess is overheating...but I have no idea what or why?
View 9 Replies View RelatedBasically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies View RelatedCan anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
Problem:
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM
[Code].....
Im having screen freezes every couple of days. My whole computer just freeze what its doing.Been
-on word
-on a game
-watching movies
-transfering data
So no specifi thing sets it off.Cant alt-cnt-delete.Its like a screen shot of my computer and watching a picture. Cant even move the mouse.My keyboard can change colours via buttons on it (logitech g110). I cant even change the colours coz its like the whole pc is in a time freeze..Due to this i dont get an "windows had an unexpected error" message when i restart the computer...
Just installed Windows 7 fresh on a new intel 320m 160gb. After i type in my password at the login screen windows hangs for about 15 - 20 seconds on welcome with the moving circle. Total boot time is about 40 - 50 seconds. I've checked the event log and an event 100 and event 200 show up at every boot and shut down but it does not tell me what process is causing this. I've tried a clean re install of windows 7 with a non sp1 and an sp1 disk and get the same results. I used windows boot or starup repair and it said something about an audio device? So i unplugged my Asus xonar but im still getting the same hang time on welcome. So far nothing is plugged in the computer except for mouse keyboard monitor and ethernet cable. I'm on a home network with one computer.The setup is gigabyte z68x ud3h b3 G skill 16gb ram or now 8corsair 800ax psui7 2600kgtx560I've installed plenty of windows 7 on many intel ssd's (mainly x25 m) and this is the first time ive seen this slow of a boot time and its especially odd that it gets hung up on the welcome screen. I've tried searching fora
View 1 Replies View RelatedI have a checkpoint VPN service to connect to the office but for some time now the service isn't starting...even after re installing. so I looked for the event log or the user & groups in the "Manage" option from "My Computer" but it's missing.... as if my user on the laptop (I have only one - me) is no longer the administrator.
View 9 Replies View RelatedI left my PC in the company of someone who might have done some meddling. It is configured to require the password upon re-opening it, but it is my understanding this can be by-passed. And, if true, knowing the time this would have occurred, can I use the Event Viewer to determine what actions might have been performed? Or is there a simpler method?
View 1 Replies View Relatedever since I got my new Asus A52J notebook about 3 months ago, it occasionally freezes for everything between 30 seconds and 5 minutes, mostly around 1 or 2minutes. After this happens I find an event with the Event ID 9 in the Event Viewer(The device, DeviceIdeiaStor0, did not respond within the timeout period.). So far this mostly happened when I'm watching a movie(online as well as offline) or playing a game and then mostly in the beginning 1-3 times and after this it was fine for the rest. SO, now I installed Firefox 4 and if I'm running it, I get 10 of these freezes in 30 minutes. Anyway, I downgraded to Firefox 3.6, I found some information about this on some other pages already(The device, DeviceIdeiaStor0, did not respond within the timeout period Solutions Log , Derek Seaman's Blog: Windows 7 Intel SATA/AHCI Lockups and Intel SATA Event ID 9), but nothing helped. By the way, I'm using Windows 7 64 bit Home Premium, the version that was installed on the computer. I attached the reports you ask for in the BSOD posting instructions, even though I'm not having BSOD issues at the moment, might still be some useful information in it.
View 9 Replies View Related"Something" is creating empty files ending in ".event" in my folders - they seem to have the name of the directory.
ie if a folder is called "hello" the file would be "hello.event". Anybody know what this is and how do I get them to stop showing up?
Windows 7 64 bit. Done complete Norton 360 scan, Malewarebytes scan, scannow from cmd prompt. Checked access rights and all boxes checked. When I try to start Event Log from services I get an error 5?
View 2 Replies View RelatedAnyone have any idea on what .event files are. I just starting noticing when I create a new file of download something. There are .event files with the same name as the file.
View 9 Replies View RelatedI've just tried installing SP1 and it's not working with the automatic Windows Update utility. I've gone ahead and taken a look at the event logs and I see that there are at least 100 warning messages like as follows: [code] I've updated the BIOS on my Motherboard, I've ran a memory check (memtest85+) that didn't result in any errors. However I haven't had any luck installing SP1 and after 3 failed attempts.
View 3 Replies View RelatedI recently checked my event log and theres a huge list of warning, error, and critical events.
View 5 Replies View RelatedAfter trying to investigate why my PC resets itself occasionally I have come across some logs in the 'events' section of Windows. Warnings - mostly DNS Client Events Errors - Service Control Manager/BugCheck/S channel/ Critical - Kernel-Power
Each of these types comes with a short description of what the problem was, how do I actually go about rectifying all these?
I have had a few BSOD on a secondary networked PC I use for some add on apps. I am pretty sure they are hardware related, but I was looking at the Event Log and it is reporting multiple errors connected with the Service Control Manager. The text is as follows "The WinPcap Packet Driver (NPF) service failed to start due to the following error: The system cannot find the file specified." The log show this has occurred 77,645 times in the last 24 hours, There are approx 700 entries of "The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
View 7 Replies View Relatedit says that in order to clear events, go to the Action menu and click 'Clear'. I have already saved everything in an external file but in the Action menu there is no option to clear.
View 4 Replies View RelatedAlright this error isn't causing me any issues I just noticed it when I was going to check the log file of my recent disk check, and it pops up a few times and from googling it some people say it can be from a virus.I just did all my full scans and nothing showed up, what exactly is this error from and should I worry about it?lso under general of the error it says Event filter with query "SELECT * FROM__InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace //./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
View 1 Replies View RelatedProblem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 7178
BCCode: 116
BCP1: 85F1A008
BCP2: 91E1C9B0
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that describe the problem:
C:WindowsMinidump 80912-16645-01.dmp
C:Usersjoset.COBROS_DOMAINAppDataLocalTempWER-61089-0.sysdata.xml
Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
Been having unexpected crashes lately on my Pc. I am running windows 7 ultimate x64. And I have been getting the Kernel-power 41. The events before the crash are random. I have read a couple of posts on this forum but I cant seem to find the ones I used yesterday to link to. So I ran a cpu stress test for 8 hours and it was fine. And a memtest for 8 hours no errors. And I just finished a 8 hour gpu stress test and that went fine.
This is the log form the crash:
Code: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
[code]....
Using Event Viewer/Applications I was getting 5 error events each day. This had to do with a "search" for a file on an external HD. I have just formated the HD and now I get "Warnings" about the the same files. The HD is now blank.
View 3 Replies View RelatedThe whole problem stems from the fact that my Office 2007 icons have magically disappeared, so I tried to run the Office diagnostic tool. But when I did, it mentioned an error about the event log service. I tried to go see if it was started or not, but when I did I realized that it wasn't even there. All of the registry values are present and correct so I don't know what the problem is.
View 3 Replies View RelatedIs it possible to run some sort of script / program when say a user defined event occurs. I know most OS'es have some sort of event triggering mechanism but getting at it is the problem. This sort of stuff is second nature in Linux but how to do it in Windows? It must be possible --for example you can set the system to play sounds on a whole series of events such as when Mail arrives or when you start / finish navigation. This says to me that there must be some sort of event triggering mechanism -but whether it's acessible via an API? I don't really want to do a whole load of C++ -- probably wouldn't know how to anyway --
View 7 Replies View Relatedi've just installed a fresh OS, Windows 7 Ultimate 64-bit and i have a error message when i reboot or turn off my PC. The error appears then disappears so quick i can't read it. Then in Event Viewer i have couple of Error ID 10, and i think that's the error message i get on rebooting/shut down, my PC.
- System
- Provider
[ Name] Microsoft-Windows-WMI
[ Guid] {1edeee53-0afe-4609-b846-d8c0b2075b1f}
[ EventSourceName] WinMgmt
[Code].....
Copy of error log at time Windows 7 shut down and tried to restart. At the time this happened the system was operating collecting weather data from my weather station and automatically sending it to weatherunderground. I was reading a book at the time this happened. This message seems to deal with booting problems and not what caused Windows 7 to close and try to restart.
View 3 Replies View RelatedI booted up the computer after being off all night and checked the Event log and noticed this error:
"the following fatal alert was recieved; 47
Log Name : System
Source: Schannel
Event ID: 36887
Level: Error
User: System
log shows the error from 8:18 am to 8:29 am.
I did a some research and from what I can gleam from it was that maybe it could be a security certificate issue?? I havent installed any new programs or hardware. I checked Windows Update.. computer fully updated. I sent detailed feedback to Microsoft.
Out of curiousity, I completely shutdown the computer. Waited for about 5 or tem min. and rebooted. The error did not show up in Event log after reboot. Has anyone else encountered this error? If so, is there a "fix?? also should I be concerned?
When I start up my Windows 7 32 bit Home edition I receive an error in the event log.I had a 840c printer on my system. I replaced this with psc750 and uninstalled the 840c.However when I boot my Windows 7 machine the event log show the following error:-
System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>319</EventID>
<Version>0</Version>
<Level>2</Level>
[code].....
Where is the network card connect & disconnect information please? In XP it was in the System Event log, but not in 7. I can get this information when I use a mobile as a tethered modem but I need to know when the LAN network card is detected.
View 7 Replies View RelatedIs there a way to delete some or all the entries in Event Viewer / Custom Views / Administrative Events?This things logs a bunch of stuff for Acobat and Spybot and for my 3ware SATA controller card. I do not need all this garbage piling up and was just wondering if there is a way to clean it out once in awhile.I looked and can not see away to do it.
View 9 Replies View Related