Event Log Message After Shut Down

Feb 22, 2009

Copy of error log at time Windows 7 shut down and tried to restart. At the time this happened the system was operating collecting weather data from my weather station and automatically sending it to weatherunderground. I was reading a book at the time this happened. This message seems to deal with booting problems and not what caused Windows 7 to close and try to restart.

View 3 Replies


ADVERTISEMENT

MMC Message At Start Of Event Viewer

Sep 28, 2011

never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens.

Is there a problem or can I do something so that event viewer open without message.

Windows 7/32 bit Toshiba laptop

View 1 Replies View Related

Error Message, Windows 7 Cannot Connect To System Event Services?

Jul 12, 2011

i downloaded a trial progran and deleted it, then i had problems with windows, booted eventually after 6 minutes but no internet and i get this error message, windows cannot connect to systen event services,log in as admin and check what services fail to load, but it wont even do that. my system restore has also been disabled etc. i tried a repair but no joy, so i tried an upgrade but, because the installed version on the PC is newer than the CD version it wont do the upgrade. i am trying to avoid a clean install. how can i get past the "you have a newer version of windows" and do the upgrade,

View 1 Replies View Related

Windows 7 Pro Error Message - Cannot Connect To Event Notification Service

Oct 13, 2012

In an attempt to log on to Windows 7, I could not get to the desktop and the error message: "Failed to connect to a windows service. Windows could not connect to the System Event Notification Service." It also, said, "Location is not available: C:Windowssystem32configsystemprofiledesktop." I ran system restore and was able to get the desk top screen, however, nothing responded and in an attempt to shut down, I had to hit control/alt/del which now has me stuck in Logging off.....

View 4 Replies View Related

What Does Message In Event File Mean Critical Error Boot Performance

Dec 1, 2012

After i press the on button of my HP pavillion, a pause of a few seconds occurs before it will start up. I get a message critiaclo error for boot performance in the event file.

View 1 Replies View Related

Windows Shut Down Unexpectedly Message

Feb 5, 2013

This morning I noticed there was an error in Event Viewer and Reliability History that implied that Windows had shut down unexpectedly. However, there is no evidence of that. Here's the message from Event Viewer...

Log Name: Application
Source: Windows Error Reporting
Date: 2/5/2013 7:50:56 AM

[Code]....

And on Reliability History, it just said Windows shut down unexpectedly. But like I said, there's no evidence of that.

View 1 Replies View Related

Usb Overload Error Message Will Shut Down In 15 Seconds

Jan 31, 2013

I received this message and I want to know how to get rid of it and get my desktop working again.

View 1 Replies View Related

Fast Shut Down Screen Message That Can't Read?

Apr 6, 2012

I'm getting a message when shutting down Windows 7 that only appeares on screen for a second before windows shuts down. I had this problem with another version of windows, but I can't remember what I did to fix it.I also have to use the F10 key at startup to boot to the HDD with the OS on it. Can anyone tell me how to slow the screen down or pause it so I can read the messageThere may also be a problem in the registry that will not let the OS find and read from the HDD. I'm getting a read error, but can't remember the exact wordingy OS is on an SSD so all I have to do is hit Enter to startup.

View 3 Replies View Related

Constant (Do Not Switch Off / Installing Updates) Message On Every Shut Down

May 12, 2011

I am using Windows 7 32 bit. I have now got a problem after automatic updates from MS. This occurs now on every shut down and power up. The message, Please do not switch off, installing updates etc. Then on power up, Installing updates etc it freezes for ages then fails and reboots.

View 3 Replies View Related

WHEA-Logger Event 18/19 Errors In Event Viewer (Windows 7 Home Premium)?

Jan 24, 2012

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?

View 2 Replies View Related

Event Viewer Errors - Event ID 1001 DHCPv6-Client

Jan 16, 2009

Can anyone help with the following errors in event viewer

Event ID 1001 DHCPv6-Client

Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Errors appear every 3 mins or so can you help fix please? has been happening sinc install.

Event ID 7000 Service Control Manager

The BANTExt service failed to start due to the following error:

The system cannot find the file specified.

Began this morning

Event ID 16385 Security-SPP

Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.

Began 2 days ago

Event ID 2 Kernel-EventTracing

Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035

This has begun to appear this morning and every 2 or 3 mins

Clean install from Microsoft image and valid key from Microsoft.

View 9 Replies View Related

System Keeps Restarting Event Log: Critical Error - Event ID 41

Dec 10, 2009

Problem:

Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).

I then check the Event logger and see it has multiple crash reports.

Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63

I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?

I just built a brand new i7 920 System.

Specs:

i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX

All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS

View 2 Replies View Related

Event 1014, DNS Client Event Warning

Jan 26, 2012

This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...

Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM

[Code].....

View 7 Replies View Related

Event 100 And Event 200 Stuck At Welcome?

Oct 6, 2011

Just installed Windows 7 fresh on a new intel 320m 160gb. After i type in my password at the login screen windows hangs for about 15 - 20 seconds on welcome with the moving circle. Total boot time is about 40 - 50 seconds. I've checked the event log and an event 100 and event 200 show up at every boot and shut down but it does not tell me what process is causing this. I've tried a clean re install of windows 7 with a non sp1 and an sp1 disk and get the same results. I used windows boot or starup repair and it said something about an audio device? So i unplugged my Asus xonar but im still getting the same hang time on welcome. So far nothing is plugged in the computer except for mouse keyboard monitor and ethernet cable. I'm on a home network with one computer.The setup is gigabyte z68x ud3h b3 G skill 16gb ram or now 8corsair 800ax psui7 2600kgtx560I've installed plenty of windows 7 on many intel ssd's (mainly x25 m) and this is the first time ive seen this slow of a boot time and its especially odd that it gets hung up on the welcome screen. I've tried searching fora

View 1 Replies View Related

Cant See Event Log

Feb 2, 2012

I have a checkpoint VPN service to connect to the office but for some time now the service isn't starting...even after re installing. so I looked for the event log or the user & groups in the "Manage" option from "My Computer" but it's missing.... as if my user on the laptop (I have only one - me) is no longer the administrator.

View 9 Replies View Related

How To Use Event Viewer

Jun 5, 2012

I left my PC in the company of someone who might have done some meddling. It is configured to require the password upon re-opening it, but it is my understanding this can be by-passed. And, if true, knowing the time this would have occurred, can I use the Event Viewer to determine what actions might have been performed? Or is there a simpler method?

View 1 Replies View Related

Freezes With Event ID 9?

Mar 28, 2011

ever since I got my new Asus A52J notebook about 3 months ago, it occasionally freezes for everything between 30 seconds and 5 minutes, mostly around 1 or 2minutes. After this happens I find an event with the Event ID 9 in the Event Viewer(The device, DeviceIdeiaStor0, did not respond within the timeout period.). So far this mostly happened when I'm watching a movie(online as well as offline) or playing a game and then mostly in the beginning 1-3 times and after this it was fine for the rest. SO, now I installed Firefox 4 and if I'm running it, I get 10 of these freezes in 30 minutes. Anyway, I downgraded to Firefox 3.6, I found some information about this on some other pages already(The device, DeviceIdeiaStor0, did not respond within the timeout period Solutions Log , Derek Seaman's Blog: Windows 7 Intel SATA/AHCI Lockups and Intel SATA Event ID 9), but nothing helped. By the way, I'm using Windows 7 64 bit Home Premium, the version that was installed on the computer. I attached the reports you ask for in the BSOD posting instructions, even though I'm not having BSOD issues at the moment, might still be some useful information in it.

View 9 Replies View Related

Getting Rid Of .event Files?

Sep 2, 2010

"Something" is creating empty files ending in ".event" in my folders - they seem to have the name of the directory.

ie if a folder is called "hello" the file would be "hello.event". Anybody know what this is and how do I get them to stop showing up?

View 5 Replies View Related

Event Log Error 5

Nov 12, 2010

Windows 7 64 bit. Done complete Norton 360 scan, Malewarebytes scan, scannow from cmd prompt. Checked access rights and all boxes checked. When I try to start Event Log from services I get an error 5?

View 2 Replies View Related

What .event Files Are

Sep 10, 2009

Anyone have any idea on what .event files are. I just starting noticing when I create a new file of download something. There are .event files with the same name as the file.

View 9 Replies View Related

Can't Install SP1 And Event 19

Mar 21, 2011

I've just tried installing SP1 and it's not working with the automatic Windows Update utility. I've gone ahead and taken a look at the event logs and I see that there are at least 100 warning messages like as follows: [code] I've updated the BIOS on my Motherboard, I've ran a memory check (memtest85+) that didn't result in any errors. However I haven't had any luck installing SP1 and after 3 failed attempts.

View 3 Replies View Related

Event Log Errors

Nov 15, 2011

I recently checked my event log and theres a huge list of warning, error, and critical events.

View 5 Replies View Related

Windows 'event' Log Alerts

Jan 18, 2013

After trying to investigate why my PC resets itself occasionally I have come across some logs in the 'events' section of Windows. Warnings - mostly DNS Client Events Errors - Service Control Manager/BugCheck/S channel/ Critical - Kernel-Power

Each of these types comes with a short description of what the problem was, how do I actually go about rectifying all these?

View 1 Replies View Related

Getting Multiple Error In Event Log

Dec 2, 2011

I have had a few BSOD on a secondary networked PC I use for some add on apps. I am pretty sure they are hardware related, but I was looking at the Event Log and it is reporting multiple errors connected with the Service Control Manager. The text is as follows "The WinPcap Packet Driver (NPF) service failed to start due to the following error: The system cannot find the file specified." The log show this has occurred 77,645 times in the last 24 hours, There are approx 700 entries of "The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.

View 7 Replies View Related

How To Clear Event Viewer

Mar 25, 2012

it says that in order to clear events, go to the Action menu and click 'Clear'. I have already saved everything in an external file but in the Action menu there is no option to clear.

View 4 Replies View Related

Windows 7 WMI Error Event 10?

Jun 25, 2012

Alright this error isn't causing me any issues I just noticed it when I was going to check the log file of my recent disk check, and it pops up a few times and from googling it some people say it can be from a virus.I just did all my full scans and nothing showed up, what exactly is this error from and should I worry about it?lso under general of the error it says Event filter with query "SELECT * FROM__InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace //./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

View 1 Replies View Related

Event Name - BlueScreen (BCCode 116)

Aug 9, 2012

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 7178
BCCode: 116
BCP1: 85F1A008
BCP2: 91E1C9B0
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that describe the problem:
C:WindowsMinidump 80912-16645-01.dmp
C:Usersjoset.COBROS_DOMAINAppDataLocalTempWER-61089-0.sysdata.xml
Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt

View 1 Replies View Related

Kernel-Power Event 41

Jan 15, 2013

Been having unexpected crashes lately on my Pc. I am running windows 7 ultimate x64. And I have been getting the Kernel-power 41. The events before the crash are random. I have read a couple of posts on this forum but I cant seem to find the ones I used yesterday to link to. So I ran a cpu stress test for 8 hours and it was fine. And a memtest for 8 hours no errors. And I just finished a 8 hour gpu stress test and that went fine.

This is the log form the crash:

Code: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>

[code]....

View 3 Replies View Related

Event Viewer Warnings?

Aug 14, 2010

Using Event Viewer/Applications I was getting 5 error events each day. This had to do with a "search" for a file on an external HD. I have just formated the HD and now I get "Warnings" about the the same files. The HD is now blank.

View 3 Replies View Related

Event Log Service Is Missing?

Dec 23, 2010

The whole problem stems from the fact that my Office 2007 icons have magically disappeared, so I tried to run the Office diagnostic tool. But when I did, it mentioned an error about the event log service. I tried to go see if it was started or not, but when I did I realized that it wasn't even there. All of the registry values are present and correct so I don't know what the problem is.

View 3 Replies View Related

Event Triggering In Windows - How To Do It

Dec 1, 2011

Is it possible to run some sort of script / program when say a user defined event occurs. I know most OS'es have some sort of event triggering mechanism but getting at it is the problem. This sort of stuff is second nature in Linux but how to do it in Windows? It must be possible --for example you can set the system to play sounds on a whole series of events such as when Mail arrives or when you start / finish navigation. This says to me that there must be some sort of event triggering mechanism -but whether it's acessible via an API? I don't really want to do a whole load of C++ -- probably wouldn't know how to anyway --

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved