I booted up the computer after being off all night and checked the Event log and noticed this error:
"the following fatal alert was recieved; 47
Log Name : System
Source: Schannel
Event ID: 36887
Level: Error
User: System
log shows the error from 8:18 am to 8:29 am.
I did a some research and from what I can gleam from it was that maybe it could be a security certificate issue?? I havent installed any new programs or hardware. I checked Windows Update.. computer fully updated. I sent detailed feedback to Microsoft.
Out of curiousity, I completely shutdown the computer. Waited for about 5 or tem min. and rebooted. The error did not show up in Event log after reboot. Has anyone else encountered this error? If so, is there a "fix?? also should I be concerned?
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed ) Asus P6T SE Motherboard Windows 7 Pro 64 Bit Power Supply Antec 750W Modular PSU CPU Cooler: Zalman CNPS 10X Extreme Samsung DVD burner Seagate 1TB Drive 7200 RPM's RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
Windows 7 64 bit. Done complete Norton 360 scan, Malewarebytes scan, scannow from cmd prompt. Checked access rights and all boxes checked. When I try to start Event Log from services I get an error 5?
I have had a few BSOD on a secondary networked PC I use for some add on apps. I am pretty sure they are hardware related, but I was looking at the Event Log and it is reporting multiple errors connected with the Service Control Manager. The text is as follows "The WinPcap Packet Driver (NPF) service failed to start due to the following error: The system cannot find the file specified." The log show this has occurred 77,645 times in the last 24 hours, There are approx 700 entries of "The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
Alright this error isn't causing me any issues I just noticed it when I was going to check the log file of my recent disk check, and it pops up a few times and from googling it some people say it can be from a virus.I just did all my full scans and nothing showed up, what exactly is this error from and should I worry about it?lso under general of the error it says Event filter with query "SELECT * FROM__InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace //./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
i've just installed a fresh OS, Windows 7 Ultimate 64-bit and i have a error message when i reboot or turn off my PC. The error appears then disappears so quick i can't read it. Then in Event Viewer i have couple of Error ID 10, and i think that's the error message i get on rebooting/shut down, my PC.
When I start up my Windows 7 32 bit Home edition I receive an error in the event log.I had a 840c printer on my system. I replaced this with psc750 and uninstalled the 840c.However when I boot my Windows 7 machine the event log show the following error:-
sorry if this is the wrong place to post this. i noticed today that my monitor would not come out of power save mode so i had to reset my pc. i looked in event viwer and saw that there are lots of event id 11 going back to the 26/9 . also my internet is taking along time to load pages thismorning aswell i don`t know if this is the same thing. what does this mean and how can i fix it please? so far i have tested my hard drive and its passed i have now unplugged my lg disk drive to see if i still get the errors, am i doing the right things? i am not that computer savy
I am using win 7 home basic edition.There was a power failure and could not shut down the system.when i started the system it gave me this error.Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond.i have also booted in safe mode and went to the command prompt in safe mode and did a netsh winsock reset.But still i am getting this error.
Ok, my system is slowing down when I do large file transfers (transfer goes from 60M/s to 2M/s after zero io for about 10 min).
Anyway, I am now combing through the Event Viewer + resource monitor and I came across "event 35" with the source kernel-processor-power the text associated says "Performance power management features on process or 1 in group 0 are disabled due to a firmware problem. Check with the computer mfgr for updated firmware" - anyway I have a bunch of these errors.
Googled for 'event 35' and found nothing - anyone have more detail on this event and how to solve it?
I'm having trouble trying to figure out how to correct a persistent Event ID 10016 error that keeps showing up in Event Viewer.
I've actually found a couple of guides on how to fix this...change the launch permissions for the app that's causing the problem (IPbusEnum) but when I try to change the launch permissions using dcomcnfg none of the options on the properties/securities tab are available (grayed out).
My user has administrator permissions, I've tried launching dcomcnfg.exe by right click/click on "run as administrator" but no go.
Here's the text of the error message:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
and APPID
{344ED43D-D086-4961-86A6-1106F4ACAD9B}
to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
The CLSID and APPID resolve to a service run under svchost (IPBusEnum). Would appreciate any pointers/hints on how to resolve this error.
Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
Can anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
Yesterday while using Firefox I noticed it kept crashing, with the cause being a "BEX Event". I try opening it to no avail, everytime terminating immediately after I clicked on it. I tried Chrome and Explorer, but both of them suffered the same problem, immediately crashing due to the BEX error. I restarted my system multiple times to see if it subsides, but it reappeared promptly everytime for ALL three browsers (!) I tried Safe Mode with networking to see if its gone. Nope, same problem, with Explorer and Firefox collapsing instantly, while Chrome seem to take around 10-12 seconds of surfing before flatlining due to the same cause.
I then decided to use System Restore and managed to take my whole system back to 5 days ago when none of the problems were happening. Tried again, but nope, same issue with a BEX event. This time it seems Explorer would display it as BEX64 instead of just BEX. I tried resetting entire settings for Explorer, but the BEX error would always prevent me from doing so by shutting down the whole things before its done. I thought, maybe, just maybe, it has something to do with a faulty DEP on Explorer, and added it the list of exceptions for DEP. Still didn't work, and the system wouldn't let me add Chrome and Firefox to the list either. I tried to see if maybe I can download some new antivirus or antispyware programs off the net, except that none of my browsers work, so I have no access to the Internet in both normal and Safe modes.... Sufficient to say I am typing here from a library's computer.
I get an Event Error 6008 on my desktop that I personally built. When the weather was cooler the computer ran fine. Now that it is summer time (I live in CA and its about 100 outside and 80ish in the house) it shuts down when I'm running high resource stuff such as games and multi-tasking if I don't use a 6inch room fan to blow are directly into the case.
So I enter the pin to connect to windows media center, that goes through fine, and it starts contacting on my Xbox and just as it's about to "configuring your extender" it cuts off and displays "Windows media center has encountered an error while trying to configure your computer with this extender". I checked event viewer and the error is as follows:-Media Center Extender Setup cannot create an account for the Extender with ID: uuid:10000000-0000-0000-0200-0025AE2444B5.Error: The system cannot find the file specified.
P.S Tried with all Xbox 360 port forwarding set to open for those relevant ports. Certificate deleted. Network services set up correctly. Firewall been turned off. No anti virus enabled. DMZ filtered on xbox both enabled and disabled, IP address are not clashing and im connected wirelessly on both PC and Xbox.
I have something going on but not sure what. I tried system restore which is not working neither. Tried multiple restore points. Says they are corrupted or deleted.The computer boots a bit slow, but it was never a fast booter. The info it
Event ID: 7000 Source: Service control Manager
Seems to to do with my Killer NIC, but i dont even run anything off it and always worked fine when hooked up
Event ID: 7001 Source: Service Control Manager Locale ID: 1003
States: The HomeGroup Provider service depends on the Function Discovery Provider Host servicewhich failed to start cause of the following error: The service cannot be started, either because it is disabledor because it has no enabled devices associated with it.I run a Quad Core with a geforce 560 and 4 sticks of ram. I ran malewarebytes and found nothing. It started when a program froze my computer.I rebooted, and when i did, my clock was messed up on wrong time and this error has showed up on every reboot now.
i downloaded a trial progran and deleted it, then i had problems with windows, booted eventually after 6 minutes but no internet and i get this error message, windows cannot connect to systen event services,log in as admin and check what services fail to load, but it wont even do that. my system restore has also been disabled etc. i tried a repair but no joy, so i tried an upgrade but, because the installed version on the PC is newer than the CD version it wont do the upgrade. i am trying to avoid a clean install. how can i get past the "you have a newer version of windows" and do the upgrade,
A week or two ago I encountered the Kernal Data Inpage Error blue screen event. I had the university brains look over it then remote Dell technical support. After the technician was done it seemed to be much better. Even a bit quicker! (This computer is nearing 1 year old. Alienware M14x laptop, Windows 7)But the blue screen came again a couple times today while I was modding Skyrim. I did chkdisk, ccleaner (both cleaned and registry checked), disk defragmenter, disk cleaner, malware scan, and everything seems to have done what it was supposed to. No blue screens yet (i could try to provoke one with that same file?) but Skyrim is so much slower. Last night I was on high graphical settings with 40+ fps, now its lagging below 30fps. I did all of the above and a restart here n there.
I'm having problems connecting some devices (android apps) to my computer via my wi-fi. I am usually able to solve the problem by running network diagnostics, but after awhile, I'll start having network connectivity problems again.
Whenever I run diagnostics in these situations, this error is shown in Event Viewer: "WLAN Extensibility Module has stopped. Module Path: C:\Windows\system32\athihvs."
I also receive the error (in event viewer) on a fairly regular basis: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x2225D3CC6415. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."
I have checked, and my router and WLAN card drivers are both up to date. I'm wondering if these errors are what is causing my app to lose connection?
Dell XPS 9100 with Windows 7 pro X64. Dell support is no help, they just keep saying it is a software issue because their boot diagnostic doesnt show any problems. It quite often makes me do a system restore before i can get back into windows after it happens. Event log says Critical type, Kernel Error. System is less then 6 months old. I have had this problem for 3 of those months for a total of about 8 times.
In an attempt to log on to Windows 7, I could not get to the desktop and the error message: "Failed to connect to a windows service. Windows could not connect to the System Event Notification Service." It also, said, "Location is not available: C:Windowssystem32configsystemprofiledesktop." I ran system restore and was able to get the desk top screen, however, nothing responded and in an attempt to shut down, I had to hit control/alt/del which now has me stuck in Logging off.....
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown 2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers) 3. Multiple Chkdsks 4. Checked system, power, performance, battery etc with Vaio Care 5. Tested it unplugged and plugged on battery 6. Toning down my power plan's maximum processor usage, changing system cooling policy 7. Reinstalling service pack 8. Cleaning out registry with CCleaner 9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
After i press the on button of my HP pavillion, a pause of a few seconds occurs before it will start up. I get a message critiaclo error for boot performance in the event file.
