I need a driver for an Okidatata B2200n. I have tried all the compatibility installs and nothing works. The printer in new and I just switched over from Vista Ultimate to Windows 7 Release Candidate 1 but now I have no printer driver that will work.
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
At places where I have worked (XP systems), one of the printer choices was "Adobe PDF". When you print to it, it creates a PDF file. I beleive this driver came from Adobe. Is this driver free?I would like to get this driver for my home Win 7 system but have not been able to find it. I have found similar drivers from other providers, but not Adobe. Some of these drivers require payment which leads me to believe Adobe does not give this away free.
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
I use Windows 7 Pro 64 bit and have a Brother HL-1440 installed which has been working fine. I recently had to go out of town with my laptop that has the brother printer installed, but did not take my printer with me. A friend lended me an HP laser jet 1022n to use since I forgot my printer. Apparently this printer is so old that when I plug the usb cable into my laptop windows 7 doesnt not find a driver for the printer automatically. So, I tried downloading from the hp site and had issues installing the driver.
Lastly, I went to devices and printers > selected Add A Printer > Then add a local printer > Then I select a usb port to connect >I selected what I thought was the correct driver from the list and finished the set up, but when trying to print a test page it would not print. So, I tried adding a printer again and this time selected the correct printer driver with the usb port. So, I am able to print now but when I go devices and printers I notice that it shows the first wrong driver i installed showing as my brother printer. when I look at the properties from right clicking the printer there is a drop down that shows all the drivers i have installed and shows the driver for my brother printer, but when I look back at devices printers it seems to show my brother printer icon named the wrong print driver i installed, basically my brother printer shows with the wrong driver i first installed.
I'm worried that my brother printer wont work now. How can I delete un needed printer drivers that are on my laptop so that only the drivers i need are installed?
I'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
I have a HP Color Laserjet 4650 printer and I am using a Windows 7 64bit laptop, the only driver available to me is HP Universal printer on the HP website.
But the issue I am having is I can't print colour and there is no option to select it with universal driver.
We are just rolling Windows 7 out as we update machines. so far we have a dozen or so HP's (not my choice)with Windows 7. We are using Win2003 server as our File and Print.The printer causing issues is a RICOH Aficio MP using the latest C5000 PCL 5c driver.Our issue is on every cold boot on *most* machines first print of the day we get Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the\servername computer to print to PRINTERNAME. Proceed only if you trust he\servername computer and the network, and then restart the print job."You add the driver, everytime, but makes no difference. Everything works fine for the day, if you hibernate the laptops and bring back to life, its fine.. but its only on a cold boot.Anyone got clues, it seems to be very common when googling,
how do i print to pdf? is there anything similar to the print to PDF addon for firefox. i also can't print when using xps nothing happens when i click save and don't have the option of printing to file. i can't check the box i would rather save to PDF though. no printers installed,XPS writer is set as default printer.
i am having an issue i have two wndows 7 home premium computers in seperate offices and when i remote desktop to the offsite one i am unable to print to the printer on site.
I have enabled the printer sharing and added additional driver support for the printer. It shows up when i am connected as redirected 2 and i can access all of the properties and other menus. However whenever i print to the printer the job never makes it. It does not matter what program i am in i have tried word excel notepad the test page firefox and nothing comes to the printer. The printer is not directly connected to the computer it is a local network install and works fine from all computers in the office just not with Remote Desktop.
I just installed Adobe Professional 7.0 which of course allows me to print pdf files. It requires a certain printer port that is being used by another pdf program that came with HP Elite HPE Series computer. I believe that pdf program is called PDF Complete 'Special Edition'.
This is the error I get when trying to print using Adobe Professiona: Error "Warning 20225" or no PDF Printer appears My question is how do I change the default pdf printer device to use Adobe's?
Suddenly since this afternoon I have not been able to print from any browsers. I am able to print test pages to the printer and print from any other applications (word and excel).
I have a toshiba laptop and it is running windows 7 with internet explorer 8 and I am not able to print from the internet, I get a error that says script error. I am able to print from all other programs and have called my printer company they say there is no problem on the printer side and all drivers are updated for the printer.
I am new to CMD but I would like to make a batch printing solution.
I know that using: Code: "C:Program Files (x86)AdobeReader 10.0ReaderAcroRd32.exe" /t "C:file_1.pdf"
I can print file_1.pdf but what I really need is to print multiple files, let's say file_2, file_3... file_n, therefore my instruction will change to: Code: "C:Program Files (x86)AdobeReader 10.0ReaderAcroRd32.exe" /t "C:XXXX.pdf"
I thought about making a TEXT file where I could write the name of the files that I need to print. Then in a batch file make a loop that will read each line of the TEXT and change my variable XXXX for the name of the file specified in each row of the TEXT.
I had a new Word 2007 doc to print, sent it to the printer. It would not print. When I checked the status it said it was printing, so I canceled the print job, it said deleting, but never deleted the doc, it just stayed with a deleted status. I can not print anything else, but once something else gets in the queue, it won't print but I can cancel it.
I'm running Win 7 Pro with my account (with admin rights) and my wifes' account (without admin rights). When in my account I can go to "file" then "print" and my printer is in the print dialog box. When in my wifes' account, and I go to the print dialog box it just says "xps document" or something to that effect where it should have the printers name. How can I make it so my wife can print?
On this computer any user I give admin rights to can print just fine. I set the security so that the everyone user has rights to the printer but if they don't have admin their print job just gets stuck in the que. It is an HP deskjet 6127, previously it was getting an error message about "A program running on this computer is trying to display a message." when a non admin would try to print and the print job would get stuck. I disabled the Interactive Services Detection service and it got rid of that message but the print job gets stuck just the same. It doesn't get an error message, it just says printing and never goes anywhere.
I also tried giving everyone read/write access to the print driver folder
Is there a way (and has windows 7 done it) to make the print-screen button to make a .JPG in a specific folder or any folder for that matter. so if you were to take 100 print-screens they would number off in a folder and be 100 files not the latest print-screen on the clipboard.
I wasn't quite sure where to post this so I'll put it here My mother bought a cooking ebook, in PDF format and in 7 parts. They came with a password to view which is understandable, but printing is restricted.My mum doesn't really think taking her laptop in the kitchen is a very practical method of reading it, and so naturally she asked me to try and find a way around this restriction. As I said I have the password to actually open the PDF and it was all legitimately acquired so I don't see the problem in asking a question of this nature.