Ok I am running 2 dual video cards, both by Nvidia, 9600 GT & 9800 GT.
Do I need to use both CD's to re-install the drivers for Win 7 64?
Or are the drivers already updated with Win 7?
Or do I need to go to Nvidias website and get the latest drivers?
I just finished upgrading my g-card from a nVidia 9800 GT to a Radeon HD 5770, now when i turn on my comp, it gets stuck at the windows start up screen.
I tried putting back in my old g-card and it starts up fine, I also used driver sweeper and uninstalled my nvidia drivers but still no luck. I also cleared my CMOS, still no luck. I'm out of ideas!!
I have three pcs installed with windows7 sucessfully. I love the operating system.
My laptop is having issues with my 9600 m GT 512 video card..windows update will not find my video card like it does on all my other systems .. 186.81 is the version I have attempted to use from the nvidia webpage... windows reboots saying it had a problem booting and it will attempt to resolve the problem... I have to use system restore after each time I install these drivers... anyone else having an issue like this? Is there a solution to this problem?
Im simply trying to install from vista 64-bit. This is my first windows install. it starts the install then on the first reboot it goes to a black screen with only a curser, ive been trying for ever and i just cant figure this out...
ive tryed mutiple times upgrading and custom installs but nothing is working.
ive installed windows 7 in c drive i deleted the hard drive first before i installed it. now my mouse keeps freezing every so often but when i press a button it refreshes for a few seconds before freezing again ive updated as much as i can i put in a old graphics card and windows seemed to run a little better although not by much i have a navidia 9800gtx+ gigabyte and have no idea what to do i have spent lots of hours looking for a solution on threads to this problem but to no avail if anyone could help it would be much appreciated.
View 9 Replies View RelatedI need to change the hardware acceleration settings, but when I go to advanced display settings trouble shoot tab the button is shaded grey and unclickable. I've updated to the latest driver and cannot find the settings in the Nvidia Control Panel to change the hardware acceleration.
Can anyone help out?
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
I have a problem with my graphic card.
In devicemanager i have displayer Radeon 9600 tx (microsoft corporation - WDDM) but on the symbol is a yellow sign with a exlamation mark in it. Rightclick+properties tell me:
"Dieses Gerät wurde angehalten, weil es Fehler gemeldet hat. (Code 43)"
Furthermore it seems i have no advanced graphics. e.g. i cant change display resolution.
Ok. so i just replaced a failing 8500 with a 9600GT(Pre Overclocked.)
Out of curiosity i re ran the windows assessment tool.
Aero graphics went from 5.1 to 7.9 =
Gaming Graphics went from 4.3 to 2.0 =
What the hell gives with that?
Im running windows 7 build 7022 by the way.
is it possible to capture Sony Hi8 camcorder video using ATI Radeon 9600 series video card ?
View 1 Replies View RelatedI have currently as you can see in my system specs the 9800 gx2 card which has 2 gpu's that add up to 1gb memory when its in sli mode. My question is is it better for me to use my 8800 gtx then the 9800 gx2? both use pci express but the 9800 uses the pci express 2 or x16 whatever it is. My mobo only has pci express so im not really getting the full power out of the 9800 gx2 as it is. Looking for a opinion if i should change out for the 8800 gtx. Planning on a new build in a couple months anyhow with all updated parts. But for the time being i was curious.
View 7 Replies View RelatedOkay ive been searching the internet (and this forum ) for a driver for my ATI Radeon 9800 Pro.
I know its an old card.. but its still decent.
ATI have put it under the Legacy support list? but if i try and install that.. Windows 7 wants to tell me that the Microsoft Corporation WDDM Driver is better and wont let me install it.
is there a work around this?
And is it possible to get Aero Support with this Graphics card?
So I'm thinking about upgrading to a better GPU and I've decided that I want to try ATI. I find their model numbering system extremely foggy, so could someone point me in the direction of the ATI equivalent of the GeForce 9800 GT/GTX+?
View 9 Replies View RelatedI am looking for working drivers for "All-In-Wonder® 9600 256MB Graphics Card" This is also known as a," All-In-Wonder® 2006 Edition"
It is the AGP type of card.
I am running Windows Ultimate 7 64bit.
I googled it but there seems to be nothing out there that will work 100% for a 64bit version of Windows 7.
I really just want the graphics portion of it to function fully. The tuner would be a bonus. I just emailed Ati/AMD and they responded with this email:
The All in Wonder 2006 is a legacy chipset. There are currently no announced plans for drivers for any of the legacy products to be developed in any operating system including Windows 7.
The legacy All in Wonder cards are supported up to XP SP2. They have no support in any operating system higher than this from AMD Customer Care. In Vista drivers where released for the card and input features. This is not the case for Windows 7, there will be no drivers for the video card or input features of the card in Windows 7.
Currently the Theatre 750 TV tuners are the only tuners with drivers from AMD for Windows 7, Theatre 650/600 tuners should have drivers released in the first quarter of 2010.
PCI Express based Radeon HD2400 series and higher Radeon based cards have drivers and support in Windows 7 from AMD.
In order to update this service request, please respond, leaving the service request reference intact.
any experience with Radeon Mobility 9600 (RV350)?
I get a black screen already right in the beginning (before boot screen) and have no idea how to resolve it. Can't install new driver as I can't even boot Win 7. Can't go into safe mode, as I can't see the menu.
I have one small monitor hooked up through DVI - works fine. Then I have a Sony Bravia 42" HDTV hooked up through VGA at the same time in extended mode - the screen resolution options dont show 1920x1400, it only goes up to 1600x1200.
I'm using1360x768 now and it works but I have to zoom in on the picture. How I can I get 1920x1400 to show up in the resolution options? Seems like this should be straight forward. Messed around in the ATI Control Center with no luck. When I had vista installed, hooking up the same TV through VGA was no issue.
I have nVidia Geforce 9800 GT graphic card and some time after my screen-saver started at once windows showed me message that my graphic card has stop working and that it recovered now. What is that should I be worried?
View 2 Replies View Relatedthe latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?
View 9 Replies View RelatedOK, so I have a BFG Geforce 9800 GT OC 1GB GDDR3 card.
Now, onboard video memory is 1024MB, obviously. However, whenever I do dxdiag, it tells me that I have "Approx. Total Memory: 494 MB".
What the hell? That's less than half of what I actually have. I didn't actually notice this until today, when I went to play Prototype on my PC for the first time, and it wouldn't let me set my resolution to anything above 1024x768.
According to Prototypes read me, the resolutions are locked at certain levels.
Cards with less than 512 MB cannot access resolutions with widths of greater than 1280 or heights of 720. This means with a card of LESS THAN 512MB VRAM has these available:
640 x 480
800 x 480
800 x 600
1024 x 768
1152 x 720
1152 x 864
1280 x 720
1280 x 800
Cards with less than 1024 MB cannot access resolutions with widths of greater than 1600 or heights of 1080. This means with a card of LESS THAN 1024MB VRAM has these available:
The following are only available for cards with 512MB VRAM or more:
1280 x 1024
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
2048 x 1152
2048 x 1536
2560 x 1600 Where is the rest of my VRAM?
I have a GTS250 made by EVGA. When I installed windows 7, it knew it automatically.
I would prefer to leave it alone, but I am I missing out? Will it perform better with the Drivers from EVGA?
Try this link if you're having problems downloading the Vista/Windows 7 64-bit file.
View 1 Replies View RelatedI've just installed latest Vista WHQL drivers in the attempt to make it work the TV-OUT mode as on XP.. but no way.
Anyone know how to activate fullscreen video on second monitor?
maybe a register entry?
As for the default Windows 7 online-update drivers, no option.
Any help?
I installed windows 7, but cant do any gaming on it as it only has the default driver for the GTX280 which is absolutely atrocious. Are there any Alpha or Beta Drivers released for Windows 7 so that people can really run it through the mill for gaming?
View 12 Replies View RelatedI have been trying to find Windows 7 drivers for my 8800GT but haven't found anything yet. Are the Vista ones compatible or do I need Windows 7 specific? If so, do they exist?
View 9 Replies View RelatedNvidia has released the Official Forceware 186.18 driver for Windows XP, Vista and Windows 7.
View 4 Replies View Relatedcannot installed nvidia drivers, it says Installer failed and doesn't say anything else! what a crap error messages nvidia gives...I tried to ran in failsafe mode but doesnt lso tried drivercleaner and driver sweeper after reinstall the drivers but nothing.
View 2 Replies View RelatedRecently I made fresh install of Windows 7 home premium x64. Everything was fine except Nvidia drivers. It starts installing, then it loads like quarter and stays like that about 10 minutes. Then installer says that no modifications made and try again later. I have tried 190.62 and 191.07. Anyone know whats the problem and how to fix it?
View 9 Replies View RelatedI'm trying to install updated chipset drivers. I downloaded nForce 680i SLI from the nvidia website. When I run install, it asks me to select what I want to install and gives only 2 choices: nvidia ethernet driver, and nvidia storage driver. Those aren't the chipset drivers, are they?
View 1 Replies View RelatedThere are new Nvidia Beta drivers for Windows 7 both 32 and 64 bit.
181.71 released 3/2/2009
NVIDIA Graphics Supercharge Microsoft Windows 7
shall i update the system with the drivers from nvidia.com (9600gt) ? the built-in Windows 7 driver seems fine, played only a little CallofDuty so far.
View 1 Replies View RelatedI use Windows 7 64-bit RC 7100.
I have got GF8600GT. Can I safely use Vista 64-bit nVidia drivers?
The reason I don't want nVidia drivers for Windows 7 is this:
How to REALLY set lower screen resolution?