I have a problem with my graphic card.
In devicemanager i have displayer Radeon 9600 tx (microsoft corporation - WDDM) but on the symbol is a yellow sign with a exlamation mark in it. Rightclick+properties tell me:
"Dieses Gerät wurde angehalten, weil es Fehler gemeldet hat. (Code 43)"
Furthermore it seems i have no advanced graphics. e.g. i cant change display resolution.
is it possible to capture Sony Hi8 camcorder video using ATI Radeon 9600 series video card ?
View 1 Replies View Relatedany experience with Radeon Mobility 9600 (RV350)?
I get a black screen already right in the beginning (before boot screen) and have no idea how to resolve it. Can't install new driver as I can't even boot Win 7. Can't go into safe mode, as I can't see the menu.
I have one small monitor hooked up through DVI - works fine. Then I have a Sony Bravia 42" HDTV hooked up through VGA at the same time in extended mode - the screen resolution options dont show 1920x1400, it only goes up to 1600x1200.
I'm using1360x768 now and it works but I have to zoom in on the picture. How I can I get 1920x1400 to show up in the resolution options? Seems like this should be straight forward. Messed around in the ATI Control Center with no luck. When I had vista installed, hooking up the same TV through VGA was no issue.
the latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?
View 9 Replies View RelatedMy new HD 4670 displays a Code 43 at the Device Manager. I installed the latest catalyst version and even the agp hotfix, they don't work. Any suggestions?
Hardware ID's:
PCIVEN_1002&DEV_9495&SUBSYS_00281787&REV_00
PCIVEN_1002&DEV_9495&SUBSYS_00281787
PCIVEN_1002&DEV_9495&CC_030000
PCIVEN_1002&DEV_9495&CC_0300
My m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies View RelatedOk. so i just replaced a failing 8500 with a 9600GT(Pre Overclocked.)
Out of curiosity i re ran the windows assessment tool.
Aero graphics went from 5.1 to 7.9 =
Gaming Graphics went from 4.3 to 2.0 =
What the hell gives with that?
Im running windows 7 build 7022 by the way.
I have three pcs installed with windows7 sucessfully. I love the operating system.
My laptop is having issues with my 9600 m GT 512 video card..windows update will not find my video card like it does on all my other systems .. 186.81 is the version I have attempted to use from the nvidia webpage... windows reboots saying it had a problem booting and it will attempt to resolve the problem... I have to use system restore after each time I install these drivers... anyone else having an issue like this? Is there a solution to this problem?
Ok I am running 2 dual video cards, both by Nvidia, 9600 GT & 9800 GT.
Do I need to use both CD's to re-install the drivers for Win 7 64?
Or are the drivers already updated with Win 7?
Or do I need to go to Nvidias website and get the latest drivers?
I am looking for working drivers for "All-In-Wonder® 9600 256MB Graphics Card" This is also known as a," All-In-Wonder® 2006 Edition"
It is the AGP type of card.
I am running Windows Ultimate 7 64bit.
I googled it but there seems to be nothing out there that will work 100% for a 64bit version of Windows 7.
I really just want the graphics portion of it to function fully. The tuner would be a bonus. I just emailed Ati/AMD and they responded with this email:
The All in Wonder 2006 is a legacy chipset. There are currently no announced plans for drivers for any of the legacy products to be developed in any operating system including Windows 7.
The legacy All in Wonder cards are supported up to XP SP2. They have no support in any operating system higher than this from AMD Customer Care. In Vista drivers where released for the card and input features. This is not the case for Windows 7, there will be no drivers for the video card or input features of the card in Windows 7.
Currently the Theatre 750 TV tuners are the only tuners with drivers from AMD for Windows 7, Theatre 650/600 tuners should have drivers released in the first quarter of 2010.
PCI Express based Radeon HD2400 series and higher Radeon based cards have drivers and support in Windows 7 from AMD.
In order to update this service request, please respond, leaving the service request reference intact.
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies View Relatedi have AMD Radeon HD 6670 when i play game then it very slow
View 1 Replies View RelatedI was looking for CCC drivers for my ATI radeon 3100.
One problem: They have drivers for ATI Radeon 3100 HD, But NOT 3100.
Whats the difference between the two?
Is it possible to just use the ATI radeon 3100 HD drivers on my ATi radeon 3100?
I have installed win 7 about 4 weeks ago and I have a hp laptop dv5115nr which uses the ati mobility radeon xpress 200, win 7 uses some generic driver which is ok but not what I am used to (xp pro), is there a a site to download the driver free?
Answer:
The latest drivers are here.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1843722&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%BB
Use the Vista ones, for 32 or 64 bit, whichever you have.
Answer 2:-
Check the following link:-
http://driverscollection.com/?H=Radeon%20Xpress%20200&By=ATI
i have Windows 7 ultimate x64 and the drivers to run my ATI Radeon 4870 work and have already been installed when i switched to windows 7 from windows vista.
I try to download the control center where i can overclock and change settings for my PC and whenever they start to install i get the blue screen and my comp restarts... What can i do?
p.s i did go to windows 7 x64 on the drivers list on the ATI wedsite and didn't accidentally click another OS
anyone know driver for ati 9200 for windows7?
View 2 Replies View RelatedCan any1 help me with this driver for windows 7 , or at least for vista x64 , i'm a little bit nubbish with the search on google i found only catalist but didn't found the driver.
View 1 Replies View RelatedI keep getting this problem whenever I play any games, mostly World of Warcraft. I always get the BSOD! It's the most annoying thing in the world. I just upgraded to 7 yesterday and I downloaded the new drivers from their site.
most I could before it reset.
Stop:0x0000008E
atikmdag.sys Adress at 9397E1F1 base at 93806000
Does anyone know how to fix this?
Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 Replies View RelatedI have this computer:Pentium(R) dual core CPU e5300 @ 2.60GHz 2.60 GHz(RAM) 3.00GBAti radeon HD 4350 512 ram When I try to, for example, create a planet in photoshop(small document) at the end when I try to save my work I get a message that there is not enough memory and couple of hours work goes to waste.Is it possible somehow to tweak my Windows 7 so I can do this?Pleasae I just got this upgrade few months ago and I don't have resources to do a new one.
View 2 Replies View RelatedI purchased a Radeon HD 5770 not to long ago, I just tried to install it but windows does not recognize it! I Know people had trouble with this is the past but with other cards. I Have Windows 7 Home Premium 64 bit.
View 4 Replies View Relatedi got in a trade my Laptop which is a Toshiba Satellite L650D-038 ( Not Sure about the -038 ) and i got it with Windows Vista 64Bit and erreased it for installing Windows 7 Ultimate 64 Bit what worked all very well but when the windows installation finished i noticed that the driver for the graphic card was not installed and also the wireless and ethernet driver was not installed so i checked in different forums and find out that the drivers doesnt come with windows 7 for this Laptop so i got the respective drivers all from the respective publishers and install them. The glitch or Wobbles happens all the time in games in browsers at Word and also here by making this question in the forum, it stops or freezes like 2-6 seconds and then goes on like nothing and then like 1-2 min later it comes again or also earlier. I installed already the drivers from the publishers and also the ones from Windows Update but noon helped me really.
Laptop Specifications ( Its a DXDIAG Info so its a bit larg sorry )
Code: ------------------
System Information
------------------
Time of this report: 1/17/2012, 18:19:04
Machine name: COSTARICA
[code]....
I'm using an LG 60LD550 on Radeon HD 6450 to watch movies. I have installed a new MOBO/CPU which required a graphics card which I was not planning on so I grabbed a cheap one till I decide which dual cards I want to run when I get yet a newer MOBO and 8 core CPU in the coming months.I have set up the following presets in AMD Vision Engine Control Center
Preset 1 (main) 23" Samsung LCD (DVI)
20" AOC LCD (VGA)
Preset 2 (Movies) LG 60LD550 (HDMI)
When I switch to the LG Preset I get a picture in multicolor fuzz I can barely see. It defaults to 1080p/60hz. When I change it to 30hz the picture clears up but does not take up the whole screen. In about 2 minutes the setting reset back to 60hz and it starts all over again. I can't seem to do anything to make the setting work. Could it possibly be the crappy video card I chose?I had the same TV hooked up to my old setup and everything worked fine.Here is my old set up.
MOBO - ASUS M4A785-M
Graphics - Integrated
Presets - Same as above. 60" worked fine. No fuzz and used the entire screen.
Okay ive been searching the internet (and this forum ) for a driver for my ATI Radeon 9800 Pro.
I know its an old card.. but its still decent.
ATI have put it under the Legacy support list? but if i try and install that.. Windows 7 wants to tell me that the Microsoft Corporation WDDM Driver is better and wont let me install it.
is there a work around this?
And is it possible to get Aero Support with this Graphics card?
I went from Windows XP Media Center x32 to Windows 7 Ultimate x32 on my HP Pavillion a1230n, and so I really want to upgrade my graphics card. Is there anything I can do to upgrade it?
View 1 Replies View RelatedI have a Radeon 5700 graphics card. I currently have two screens running off DVI ports. My graphics card also has a HDMI and DisplayPort available. I know that my 3rd screen needs to be running from the DP connection to facilitate 3 screens. owever, my screen only has HDMI and VGA inputs. So I bought a cord that went from DP to HDMI so that it could go directly from my tower to my screen without any adaptors. However, It still wont work! Apparently, I need some sort of 'active DisplayPort adaptor'. But my cable output to screen is HDMI. Is there an 'active adaptor' that is DP but goes from HDMI to HDMI? That seems like a very obsure thing to exist.
View 4 Replies View RelatedI play games sometimes on the weekend.The fan of card is a bit noisy.And the temperature reached 70*c wille playing nearly all the games.Should I replace the fan or the card? If I sell the video card now,how much is it worth?It still looks like a new card. If I update the card to a better one.
View 2 Replies View RelatedI have an Acer Aspire 7750G-6662. It has switchable graphics with Intel Graphics as well as AMD Radeon 6650M 2GB VRAM.I've already solved my first obstacle, which was how to set my laptop to only run the Radeon Graphics.
View 2 Replies View RelatedNow i am using window 7 ultimate!!
Is tat my grafic card not support for window 7..
my grafic card got state tat only work on net framework 2.0
N in window 7 already include net framework 3.5.1
but still my VGA cant use?/?
the error message is
This device cannot start. (Code 10)
Another is I need use the software Ansis 12.0
Is aslo got problems at net framework 2.0
the system said that turn on or off the feauture?
To make long story short, I need to buy this old ATI Radeon 7000 but I want to make sure that this card is supported by windows 7.
I search for official driver from AMD but seems they no longer support it but I found the driver for windows 7 on the net. ATI Radeon 7000 drivers. Can someone please confirm it works with Windows 7?