Well, I recently updated my Windows 7 x64 Ultimate to SP1 (as of about half an hour ago), and I've had one noticeable problem: my sound doesn't work.
This means that unfortunately, I cannot hear the sound of a Ferrari 458 Italia starting up as I log in, and even more so I cannot blast Rush louder than a sonic boom.
Well, here's the deal: Windows 7 reports to me that there are no input or output sound devices installed. So, I go into device manager. Device manager tells me that "Windows cannot load the device driver for this hardware. The drivers may be corrupted or missing. (Code 39)" for the audio devices (HDMI) on my ATI Radeon HD 5700s AND my onboard Realtek ALC889, along with "Microsoft Trusted Audio Drivers". I uninstalled the driver with device manager and restarted. They showed up again, with code 39. I tried updating the drivers with windows update. Nothing. I installed drivers from the Gigabyte website. Nothing. Still that code 39 shows up. I even tried a "UpperFilters" and "LowerFilters" registry key fix. That didn't work either.
I tried uninstalling SP1 and trying the aforementioned fixes, and nothing. Same issue. Reinstalled SP1, and same issue still! Somewhere along the line, "Microsoft Trusted Audio Drivers" stopped showing up in computer management.
I would do a system restore, BUT the most recent backup was in december 2010, since restore points have been disabled for some strange reason. Out of desperation (not being able to hear "The Fifth Order of Angels" ), I tried a system restore, but that failed since I don't have enough space on my boot disk (an 80 gig ssd).
Even more intriguingly, my creative fatal1ty USB headset (older one) works fine. I get sound in and out through that guy. It's just the 5770s and the ALC889.
I decided I'm going to wait this out. If I don't see a hotfix in the next month, that's it. I'm reimaging or reinstalling.
Otherwise, do you have any input with regard to this matter? I'm going to test the sound card from a live cd and see if that does anything, but I'm more than confident the ALC889 is in good working order.
I got a original windows 7 ultimate CD and during the upgrade it gives below error code
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570
i just installed win 7 ultimate 32-bit and have no more sound. i fried my onboard sound so i used an old soundcard(this was before the install) and forgot where the driver is. i found out it is an OEM compaq soundcard made by creative called audio pci 5200(?).
with some research i tried to install drivers but its incompatible with win 7. i also tried the windows update and it found Creative AudioPCI (ES1371,ES1373) (WDM), but could not install it. checking the properties it said it does have enough free resources and i need to disable another device. (?)
edit:[ This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.]
it shows the name up there (Creative...) under sound, video and game controllers in the Device Manager.
My M/B sound is not working and hence I have an basic Crystal Sound Fusion audio card. Windows XP and Ubuntu is working with this Sound Card. But Windows 7 has problem with it. I tried to ON the option " Plug and Play OS " in BIOS. But device manager does not worked. Then I disabled onboard Audio so that it will be sloved but it replies same only. Device Manager of Win 7 says that
I bought a dell XPS 420 64bit two years ago and a year later upgraded to windows 7 64bit (upgrade) . The last two years my hard drive has frozen and this summer required an additional hard drive. With some difficulty, I was able to reinstall the windows 7 upgrade witch had come in a box with no code numbers). I now have received on my computer notices from Microsoft that my use of windows will be discontinued in 30 days if I can not provide my code numbers! What do I do?
I have had no problems, until now. This Christmas i got 2x2GB Dual Channel DDR2 800Mhz. I installed them and booted up windows 7. Everything seemed fine, until i noticed there was no sound! I investigated further to find that no sound was being processed through my feedback monitor. It was also interesting to see that WMP refused to play MP3s, and album art would flicker. VLC can play MP3s, and also CDs work but of course no audio.
So next i have Tried all the different possible combinations of ram. The only working configurations apart from the original was one of the new sticks on there own, or also one new and one old. All the other configurations render the sound problem. I have also swapped ram with another computer to check the ram, and it works fine on the other computer, and the ram from that PC doesn't work on mine.
I have goggled far and wide to find a solution and cannot find anything even remotely similar. i have also updated my BIOS in a attempt to correct the problem, and i have run a diagnostic of my sound card with the bundled software, yet it says everything is fine.
I upgraded my pc yesterday with new psu and water cooling. worked great. then I added another 6850 and went back to playing bf3. No sound! i uninstalled drivers and reinstalled them. I cleared the drives and reinstalled Windows. No luck. Messed with which devices where primary. Tried headphones through front usb. no luck works through my 6850 when I connect it to my HDTV. So it looks like my primary sound device on my board is just plain messed up. I even went into my BIOS to see if it the board was set to default. When it is hooked up to my board all I hear is this feedback kinda stuff. Like when I move the mouse I can HEAR it. Like a light-saber sort of. WTF is going on? It worked fine before! I'm so afraid I totally screwed up my huge investment for good! This is what I have doneChecked Master Volume control.Checked Windows Audio Service is started.Checked Device Manager for bad drivers.Checked your audio mixer softwareChecked BIOS to insure on-board sound is enabled.Installed the correct Chipset and Audio drivers.
I recently upgraded 2 PCs to Windows 7. Both of them are clean installs. 1 of them I used 32 bit (4GB RAM), the other 64bit (6GB RAM). They both have the Realtek High Def Audio sound cards built in. on the 4GB PC, Windows uses its OWN High Def Audio sound driver, which works but sounds like crap, no dept, no bass. On the 6GB PC, Windows 64 FOUND the Realtek High Def Audio sound driver so it sounds great. I have tried on the 4GB PC to install the Realtek High Def Audio sound driver (from downloading it) BUT upon restart Win7 reverts BACK to its own High Def Audio sound driver, which drives me nuts!!! I have tried disabling it and removing it before installing the Realtek High Def Audio sound driver but upon reboot it always goes back to the Windows driver. The download is an executable (and runs w/o creating a folder) so I can't point the Win driver to it.
my toshiba satellite laptop sound on all programs (win media player, Internet etc.) sounds like digitized static. it will reset itself upon restart, but then at some point revert to static again. this follows suit with the login screen as it will look clear when sound is good, but then have scan lines going through it when sound is bad. this is following a complete wipe from windows vista and installing windows 7.
I'm looking for suggestions on how I could improve the audio quality, mainly for music, that I can get out of my laptop (T61p). It's not that bad now, but I'm sure it could be better, especially since I already have some very nice earphones.
I know I could get an external sound card with a pcmica interface, but the problem is that is a dying interface that will most likely not be supported in the next laptop I get, and I'm hoping I could find something that could be transferred to the next laptop I will probably get in the next year or so.
My current laptop also has an express card slot. I'm not sure about the future of that interface either.
I have just upgraded two HP DV9000 series laptops to Windows 7 (one from Vista and one from XP) and according to Device Manager they both have all the drivers installed just fine. Only there is no sound on either of them. The sound was fine on XP and Vista.. I know the speakers are working because when I touch the blue controlls above the keyboard the speakers emit a chirp (which is more than just a beep) but there is not a peep from Windows. Both laptops use a nVidia chipset and i have installed the drivers from HP's support pages both with and without compatibility mode. I have also used a couple of different sound drivers but still silence.
I have a computer with pentium 4 processor. I upgraded my OS to windows 7. Now I cannot install the drivers. Can't play games it says open GL is required. Cant hear sound. What should I do??
Working on a client's computer that was blue screening with Vista 32 bit HP desktop gl309aa. She cannot find the original Vista install CD. I determined that the culprit was probably the wifi driver, and hoped to install updated drivers for that, plus video card and sound card drivers. After much fiddling with the system, I finally got it started through Startup Repair long enough to install the video driver. I had to go through 2 sets of memory diagnostics to start it at all, since even safe mode was not working. When I went to do the sound card driver, it required an uninstall first, so I did that, and foolishly went along with the restart to finish the process. Lacking a sound card driver, it blue screened all over again. Tried everything, including many times with HP Recovery, but every time it blue screens before any process can complete. On top of this, while working on it, she had a power "flash" for a second, and now the system is missing BOOTMGR so it won't even try to boot into safe mode or anything else. I have the drivers on flash but cannot install them. I've decided to forget Vista (awful system anyway) and give her Windows 7 instead. Much more stable, and her data is backed up in case she loses it.
am I going to have any problems installing the Windows 7 if the computer still thinks it has no driver for the sound card? And is there a way to install the file before or during the Windows 7 installation so it will go smoothly? Again, BSOD every time I start HP recovery so there is no way to use that, and we will have a new Windows 7 CD to begin this process.
After an upgrade from Windows XP to Windows Vista 32 (all drivers, modem, audio, etc. found on Gateway support windows vista 86/64)to Windows Business N 64 I cannot find certain drivers that are compatible with Win 7. I have tried the win vista 64 drivers with no luck. I have searched, for two days, for drivers AC '97 2.3 Compliant Audio (Conexant Audio 6.14.10.0575 from Gateway website), and the PCI Modem (Conexant7.22.0.0 1.4 MB 08/03/2010) do not work. I searched the Conexant website for drivers, again no luck.Other than that, after a HDD upgrade, 2GB memory upgrade this old machine, supprising, it runs very good.
Gateway MX 6421 Windows 7 Business N 64 Bit Audio_Conexant-Driver Issue Modem_Conexant-Driver Issue CardReader_TI_- Driver Issue
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
I ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
Customer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
the sound is crappier than ever. I have this quality loss for a while but now is repulsive. Ive reinstall windows 7, reinstall relatek drivers, get ones specified by my motherboad manufacturer, tried the latest ones.... put power management at high performance...etc my motherboard ASUS - Motherboards- ASUS P5GC-MX/1333
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.I have a dell inspiron 531. The hardware ids from the device manager areHDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000 HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020EI have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.Does anybody know what might be causing this? I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!) If anybody knows a fix for this I really would be eternally grateful
I've solved my gaming graphics issues, namely by choosing the parts I wanted rather than buying yet another "Media-Center"-style all-in-one unit that did everything, but not very well, I'm now in need of a solution to my present awful headphone sound quality. I have a generic Creative Labs Sound Blaster X-Fi Xtreme Audio card that is not very good, sound-wise, and, because it doesn't even include an optical out plug, goes unused. I purchased a refurbished Turtle Beach headset w/DSS decoder, and, while it works as advertised, the headphones are terrible for music. I've replaced the TB Headset with a much better-sounding Pyle set, and will buy some "real" headphones as soon as I've determined that the source itself is sending out a good-sounding signal.I've seen pro and con arguments about sound cards, like the Xonar series that have headphone amplification included. My issue with that is I am more concerned with the graphics for games, and I've built this system with SLI (another gtx580) in mind, and I do not see enough room under or in between the dual GPUs for proper installation of such huge sound cards, though I'm glad to have my ignorance in this area demonstrated. The anti-Sound card group seems to be gravitating towards a separate headphone amplifier, and I"ve seen them from the $20 dollar model included free with another headset I purchased, to the $1800 tube amps. I think I would like to either go this route, or purchase a home stereo receiver that can output the PC sound, thus having both satisfactory amplification for low-volume music listening( or ear-bleeding levels, if desired) and the ability to power speakers elsewhere. I guess what I'm asking is for some entry-level priced PC headphone amplifiers to start off with. I see countless rating comments for the FiiO series, and while the prices are certainly attractive, the fact that they're so low-priced also makes me leery of their actual amplification abilities while staying neutral in tone.
Why when watching Live TV in media center does muting the sound there mute all of Windows sounds? Would like to be able to mute TV sound, use close captions but still have windows sound function for other programs.
Why when watching Live TV in media center does muting the sound there mute all of Windows sounds? Would like to be able to mute TV sound, use close captions but still have windows sound function for other programs.
Using a tuner card in my computer. When I mute the sound in Media Center Live TV, it mutes all the Windows sound. Would like to be able to mute the Live TV & run closed captioning while keeping all the other Windows sounds. Can't seem to find any options to set.
I just bought a new pc from Dell. I opted out of buying the SB sound card they had as an option and now I am sorta regretting that. I loaded RC 7100 as soon as I got the machine and after going through this forum I am sorta left with the impression that SB cards don't work with Win 7. Is that really the case?
I was looking at an "Sound Blaster X-Fi Titanium Sound Card" but if it will just cause me grief it's not worth it. Does anyone have a suggestion as to what I can get and not pull my hair out trying to get it to work? The main game I play sounds sorta mediocre with the on-board sound.
