I was using my computer and wanted to change the security setting and access level of the folder where the windows was installed. When i right clicked on the folder and then selected the properties,then the security tab and i saw many users ,which i think i have not created,. So, I deleted all the users and something went wrong now as I lost access to the whole folder of windows, Folder C.I am logged in as an administrator but still i don't have access to anything. I can't manage accounts, I can't create new accounts and I am really confused .
In Win 7 Home Premium, I apparently did something wrong as I can no longer access the administrator account on my desktop. I am logged in as a guest and have tried just about everything suggested here. I have started in Safe Mode but can't access admin. I have used the installation disk to do a repair and used the activate command in the command prompt. I used the "enableadmin" mentioned on this site. Regardless of what I do here, when I restart I am back in Windows as a Guest. Even doing a system restore made no difference.
It would appear I have to do a clean install but before doing so thought I would ask to see if there is anything else
Many times I have seen the "Access Denied" error while using an administrator account.Especially in disk management utility when I tried to edit disk partitions but couldn't even with administrator privileges.This is not a specific case - I just want to know how, even with administrator privileges, there are still restrictions (access, modify or change)And what can I do to bypass those restrictions?
So I am using Windows 7 and I made an account for my nephew so he can use without nagging me about entering in a password. But I wanted to make it so that he cannot download anything or edit any files on the C: Drive without a admin password. I changed the security settings on C: so that it will not allow anyone who is not Admin to access any files in the C: folder. My problem is that it locked everyone out of C: ... Any UAC settings or account settings cant be done.
My account is an admin and anytime it try to access anything or run anything as administrator, It says Access Denied. (BTW I never get a prompt to put in an admin password). So I went on safe mode and made it so that the Built in admin would show and I logged on it. I opened an elevated cmd and tried to change the uac settings.. but all I get is an Access Denied! I don't know what to do and I do not want to have to reset the whole computer. I cannot use system restore because it says access denied.
How do i access the already built-in administrator account so i can make security/privilege changes so that i can change time servers using the command linebecause every time i use the NET TIME command it gives me a "access denied" error; which tells me something, only Im not sure what needs to be changed. Also, it says I already am a administrator so why is it giving me a access denied message?
Done a factory resetting,want to delete unwanted files,but couldn't.Most of the thread here having the same problem are quite old and asked to start a new one.I have tried sliding the bar lower on UAC,Tried to take the ownership of the particular folder but couldn't.
I need to restrict internet access to windows 7 administrator account. JUDGE ORDERED THIS. PROBATION OFFICER NEEDS TO BE SHOWN. I have a computer savvy kid. Is there any foolproof way to do this? I changed my security network key. Somehow he figured it out. It is becoming a "You can't limit my access" power stuggle even though the stakes are high. He needs his computer for homework and writing assignments or I would just take it away.
i did'nt do anything specific to make it happen, but all of a sudden i can't acces all those "my" files in my documents anymore, you know "my picture" "my music", all of those files. the icon is a little faded and shows a lock on it. when i try to acces it it sais "acces denied" (in my language). i can still acces all files i created myself though. also, a few days later, i all of a sudden have a stndart administrator account.i know that it is standard because my account is removable but the account "administrator" is not. now i would like to know how i could regain acces to my files, or even better remove to administrator account and turn my account back to the standard administrator account.
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I have an Acer laptop which came with one user account, Acer, with the administrator right. When I tried to rename it to Administrator or administrator, I got an messages saying that user name has already existed
I recently logged onto my account about 2 days ago to finish a project. The music file I used for the account was could not be found and when I went to locate it I was told I didn't have administrator rights. I went to Control Panel because I was sure I was an Administrator, but sure enough, I was set as a Standard User. I tried changing it up but it wouldn't change. I tried changing the account name also, and it wouldn't change. I could only change account picture. I can't open UAC, I click it and it blinks but nothing opens. I deleted any recent program installations,I booted in safe mode, however I was still not able to change my account,I tried activating the hidden administrator account but I received an "access denied" message,I tried creating a new account but I received the following message:"The specified account name is not valid, because account names contain the following characters: /[]":;|<>=+,?*Please type a different name."I didn't use any of those characters in the account name.I ran 2 different virus scans, and they came up with nothing,I turned the computer off, unplugged everything, and pressed the power button for 30 seconds, and rebooted, but still nothing!My roommate shares this computer with me, and her account is still an administrator. However she has traveled and I haven't been able to get hold of her yet. We share music files and the file I was trying to use is in her account.why my account was changed and how I can change it back?
I am the Administrator, can I log into any account using my admin pass?I have several standard user accounts with passwords.. I don't want to remove their passwords or delete the accounts, just have access to them..
I am using windows 7 professional x64bit.My computer is in "Manipal.net" domain with user name "ESKE"Now I can't install any software. It says access denied.Computer is not allowing me to enable "built in admin account".How can I install new software?
My Windows7 suddenly displayed a default desktop. I then did an unsuccessful system restore, tried the undo and got stuck. From there on, when I want to log in I end up at the error message "The user profile service failed the logon. User profile cannot be loaded". I tried to activate the administrator account by using "net user administrator /active:yes". The command executes, but administrator never shows up on the login screen. I cannot start Windows 7 in safe mode. A few seconds after the safe mode login screen appears the computer restarts automatically. No administrator account is listed here either.
I forgot the password i have set for the administrator account. It's not the Administrator itself, but a personalized Administrator account. I'm currently using a non-admin account to use my Laptop.
I have a Sony vaio laptop running windows 7. Recently I restored it to a previous state, so I decided to create a password for my admin account. Once I completed the password set up I restarted my computer to see if my password will work. Well it didn't. I Got message "your account has been disabled please see admin" (or something like that). Im completely locked out of my computer. The only accounts pop up at the log in screen is the built in admin account and other user. I've tried putting it in safe mode (same result), I've tried the blank pswrd (same result) I've tried alt+clt+del (nothing pops up) and I've tried using my pswrd.
Im currently using a standard user account.Ive tried the elevated command prompt net user administrator/active:no command and it said the command had completed successfully.But i can still access the administrator account at log on.Any ideas please how i can disable the admin account and just have the standard user account running?
When i start up my PC (which is running Windows 7 64bit) a box comes up and says im not an administrator even tho there is no other accounts on my system? Is it a Virus?? Can anybody shed any light on this situation or tell how I can fix this problem please?
I don't know how, but my 13-yo daughter somehow managed to change the name of the Guest account on my notebook (running Win7 Home Premium) to "NomNomMonster" and give it administrator privileges. When I turn the Guest account off, the name shown reverts to "Guest", but when I turn it back on, the name is once again "NomNomMonster" and shows administrator privileges. how to restore the Guest account to its normal name and status?
I am currently unable to delete my old Administrator user account on my Win 7 PC. I log onto my new Admin account and go to the Control Panel and then to add or remove user accounts. I select the old account select delete, and then confirm. It does not let me do this. However, oddly there is no error message, it just sends me back to the page I was on previously and the account is still there. I also cannot demote it to a standard user account.
This is a new computer (laptop) with 7 Pro. The Administrator account has full privileges, but if I try to create a new account with administrator privileges, it does not have the full privileges--i.e., its a though its a more limited account even though it says its an administrator account. I have checked and there does not seem to be any fix for this except reinstalling windows--although this computer just came with OEM and I don't have a CD. Any way to correct it?
I began having BSOD's on my PC, after a significant amount of work, I made the decision to repair the files through Windows 7 with the option to retain my files and setting vs. a clean install. I subsequently realized that the problem that was likely causing the BSOD was an incorrectly seated video card (I currently have two GTX-295's).That being said, with the reinstall the original administrator's account is no longer accessible. I've got the folder on the C: drive where I'd hope to be able to reactivate it and therefore retain all the previously installed programs rather than having to reinstall everything.Any thoughts on how I might be able to get the current version of Windows 7 to "see" this User Account and as such avoid the reinstall of everything?
I have a load of Windows 7 laptops/pc's on a domain and wondered if the general feeling was to leave the default administrator acct disabled and create another local admin (although obviously I realise there will be domain admins as well) It was my understanding that leaving it disabled and not changing the password allows you to activate it should you need to
Basically if I wanna change settings or install things, I cannot. It says I need to be the administrator, I have no clue why my account changed to standard. Here's what I've tried to resolve my problem, but it has not worked.
- Control Panel> User Accounts> Change Your Account Type> Admin.> Select Didn't work and when I go back to it, it still says standard.
- Run> netplwiz> Name of Account> Admin> Access denied How to fix this so my only account can be an admin?
I tried to enable/activate my administrator account by following these steps:
1. Open the Local Users and Groups manager.
2. In the left pane, click on the Users folder.
3. In the middle pane, right click on Administrator and click on Properties.
4. To Enable the Buit-in Administrator Account Uncheck the Account is disabled box.after creating enabling the administrator account I just rename it to my interested nickname and I set a password for that.But I still have to run some programs as "Run as Administrator" while I am in administrator account!. I can also see and access to all of stored file and folders (which I saved as Administrator in my document) when I log in as a standard user!I also enable / activate Hidden Administrator Account by this way:
1. Type "secpol.msc" in RUN dialog box or Startmenu search box, it'll open "Local Security Policy" window.
2. Goto "Local Policies -> Security Options".
3. Double-click on first option "Accounts: Administrator account status" and select "Enabled" and apply it.
I've just got a fresh Windows 7 install up, and I was wondering-- is it worth keeping an admin account separate, and running on a standard user unless needed? Would some things be restricted completely, or would it just require a password instead of automatic? Also, if it is the case that I should be running in standard for security reasons, can I make a new account, switch that one to admin, and make this one standard without messing anything up? I have a bit of programs installed on this current administrator account (right now, the only one on the computer. The programs I have installed, specifically, are Avira/Malwarebytes and Firefox.
