New Unrecognized Network - What Is It
Aug 9, 2011
I have wireless but it hasn't been turned on in weeks. I only use an Ethernet cable. I rebooted my pc a while ago and found this in my networks "COMPANY-4C60A99"A google search does nothing. All my networks go away when i unplug the cable. Only other network I have in the house is my wife's pc and a network link to my own pc.. (dont know why it needs to be there but I enabled share on a few folders so the wife's drive will see it, and thats when my computer decided to "see" my computer)But thats no biggie.. both of those are accounted for is the thing. Could this Company be something having to do with my router/modem? The wife could not have made a change on either of our pc's to account for this. I'm just baffeled. I cannot connect to that network.. I check it with a troubleshooter and it says all my hardware is set up properly but the network is not responding.
View 5 Replies
ADVERTISEMENT
Dec 12, 2011
I just got finished building a new PC and the network is locked saying "unrecognized network/public network" and I cannot change it. I do not connect to the internet and I also do not get an IP address from my router (DHCP, the address given to the adapter is a 169.x.x.x address. This PC is sitting on a small workgroup here at my office. I have tried to disable the adapter and re-enable, I have reloaded drivers from the original CD. Here are some specs on the hardware and software.
Windows 7 professional x64
Asus P7P55D-E LX motherboard
Intel I5 760 processor
8 Gb DDR3 1333 memory
No other software loaded at this time. This is a brand new build, after windows finished loading I loaded the drivers from the Asus CD provided for the motherboard.
View 2 Replies
View Related
Jun 30, 2011
I tried to update my ATI driver and uninstalled the old ones first. When I went to download the new drivers, it said it "The version of your graphics adapter is not supported." I went to check in Device Managers, and now under Display Adapters it no longer lists my ATI HD 5650 graphics card, neither does dxdiag (which i ran a week earlier and it did detect the graphics card). Also, 'Standard VGA Graphics adapter' has a yellow "!" but when I tried to update the drivers for it, it says I already have the most recent ones but still has the "!".
View 9 Replies
View Related
Oct 16, 2011
I recently lost my partitions while resizing it using a software.Getting directly to the point, I re installed windows 7 on C: after formatting it. But the D: drive where all my files are backed up is now unrecognized. I have used another recovery software and recovered some photos & videos, but I'm sure some more important files are still remaining. Can I rebuild or re-structure the D: drive using a software so that I get it back in its actual state, i.e just like how it was before my resizing accident? If yes, which is the software I should use/buy ?
View 8 Replies
View Related
Aug 30, 2012
I have been noticing this in the task manager "InputPersonalization.exe" I have never seen this before. I have been using the On Screen keyboard after a coffee accident and was wondering if that's just a process from that. I have done some research and it's to do with Tablet pc's well this is a desktop.
View 5 Replies
View Related
Feb 1, 2013
How to recover files from unrecognized part
View 2 Replies
View Related
Feb 6, 2012
I have two new Windows 7 computers (laptops) that I run 3D design software on. I have multiple programs that utilize a simultaneous pressing of both left and right mouse buttons (not double-click). This command goes unrecognized in my software and is used extensively to go into 3d rotational manipulation. I also have a mouse that has the central scroll-wheel button that will activate this feature, but the dual button press also goes unrecognized from from the mouse. My old XP computer recognized this input just fine. I have already been through mouse properties and found nothing obvious. I have also checked for updated mouse drivers.
View 1 Replies
View Related
Nov 23, 2012
Just the other day my wife and I are watching several movies on my external hard drive, which has a plethora of movies we've gathered. It's not even that old, less than a year old.I have three computers in our house
-Windows 7 64bit Desktop (custom built)
-Windows 7 32bit laptop (Dell Vostro 1700)
-Windows 7 32bit Toshiba)
Not a single one of these computers even so much as detect the hard drive at all now. I tried a different usb cable as well, and i got nothing. I tried different wall outlets, it still blinks when I plug it in the computer, but the computer doesn't remotely see it.I first noticed a problem when I tried to download a new movie using utorrent. It started the file, and then failed saying something was wrong with like cyncro or something. Whatever, I looked up the error code. Appears others have had this issue as well, so I did what they said, "chkdsk /r" on my hard drive (J:/). It got to step five, but froze there...got nothing, for over 6 hours it sat there and not a thing at all.So I cancelled it, closed it out, and restarted the computer with the device plugged in.it reboots, and now...absolutely nothing. It doesn't even see that a drive exists.like I said, I've changed out the cables, moved power outlets, tried different computers and different ports, and done these steps on each of them:
1. Checked device manager...doesn't even show it on any of the computers.
2. Checked printers and devices..not even a hint.
3. Checked hidden devices on device manager...not even there.
I just recently had another issue. I was trying to get my ALFA AWSU036NHR wifi modem to work, but it wouldn't work. The difference was, I could see the device, the driver just didn't work. I fixed it by finding the driver (which was ridiculously hard to do until I start looking outside of the Alfa network of drivers and looked towards realtech. I downloaded a torrent of driver packs for windows 7 32 and 64.
View 1 Replies
View Related
Mar 15, 2012
I am facing a problem of new unrecognized "Bluetooth Peripheral Device".my laptop is inspiration N5110.when i send some file from my mobile to laptop i fall in some problemin device manager i have 4 Bluetooth Peripheral Device with yellow mark in other device catagory t rid of this i tried uninstalling but it backs again
View 2 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Jan 23, 2013
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
View 9 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
Feb 11, 2012
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies
View Related
Jun 7, 2012
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies
View Related
Nov 2, 2011
Should I turn off network discovery on each Windows 7 pc in a domain network after mapping each pc to server shares
View 2 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
Aug 23, 2009
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?
View 3 Replies
View Related
Nov 1, 2009
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Anyone had this problem?
View 0 Replies
View Related
Jan 14, 2010
How to Set the Windows 7 Network Location Type ?
View 0 Replies
View Related
Nov 17, 2010
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
View 1 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Nov 2, 2009
How to change network type to private network in networking and sharing centre with out showing UI to the user and it need to be done pro-grammatically.
View 2 Replies
View Related
Oct 26, 2011
(the bytes sent and received). It seems skype calls and watching in browser videos shoot them up into the billions after a few hours +. Upon googling around i am quite alarmed. Why did my network randomly change to "network 3"? A few weeks ago it just said 'network'?
View 7 Replies
View Related
Jul 18, 2012
I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies
View Related
Apr 8, 2011
my laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies
View Related
