Multi-OS Sharing On Same Computer
Oct 2, 2009
I have a Multi-OS unit (Ubuntu, 2x Windows XP Pros, and Windows Vista), the problem started when I installed Windows 7 64bit RC. At first it worked well, then once I started using my media (pictures, music files, videos) whenever I worked on XP and Vista, I couldn't access my files in the media folders. It always says Access denied.
I found a small remedy by booting in Windows 7 and then editing the sharing properties, Share with homegroup and adding everybody in the list of people "to share with". The thing is, it doesn't work with some sub folders and files inside sub folders. I end up having to edit each and every shared folder's security/share settings.
The big question I'd like to consult is, if there was some way of resetting the sharing properties of my main/parent folders and reset them and their sub-folder hierarchy.
I understand the problem with security, but I think that it doesn't apply here since its just other OSes within the same system trying to access files inside it.
View 1 Replies
ADVERTISEMENT
Oct 19, 2010
Installation copiers Multi Boot OS with Multi software?
I have just just purchased some new PC with different configration AMD Phenom II X4 965, Gigabyte 890GLX Motherboard, 4GB RAM, 500GB HDD and 2nd AMD Athalon 635 with Gigbyte 875 Mothboard -4 GB RAM, 500GB HDD.I want to use these machines for Gaming as well as for teaching and for Internet browsing and web site development
What i Did i had Installed Multiple OS Windows XP SP3 32Bit, Windows XP SP2 64 Bit, Windows 2003 server 32 and 64 bit, Windows Vista 32 & 64 Bit, Windows 2008 server 32 and 64 bit , Windows 7 32 and 64 bit.
Now i want to install general softwares like Office, Adobe Master collection cs5 , Autocad, Coral , Visual studio Java, C, SQl Server, Oracle and the list caries on
I want that i dont have to install these software again and again on every software so that the space is not occupied and i can use same program files folder for each and every OS and time is also saved from installing the software.
For that i have seen some installation copiers (backups) which remain in memory before installation and records the information of registry and system files being copied and records and the can again be copied to the different OS.
Is there any ways to do these which installation copier backup is good for doing this . finding such softwares which can copy or backup installation files registries and i can just use the same installers.
View 3 Replies
View Related
Jun 5, 2012
I got windows 7 about 5 months ago and this sharing thins is about to make me want to find a good XP computer. When I first set it up I couldn't access but few of my files. I have read all I can find as well ask questions on forums. I have finally got it where I can most of the time see my own files. THEN yesterday I downloaded a jpg file from my cell phone to the computer. The image is side ways so I went to rotate it clockwise and the computer says I don't have permission to this file. I messed with it 30 minutes and could never get where I can edit it. Now, mind you it is in a folder and other files in that folder I can edit. I finally deceided to try to save as in another folder? It let me do that and from there I could rotate it. This makes no sense to me. How can I make all the files on this dang computer be available to me or anyone who is on my computer? Who ever made this sharing thing this way must be paranoid and trying to hide something from his wife. My life is an open book whoever is smart enough to get in my computer can surely see all my files anyway. All this is doing is keeping me from my own files.
View 2 Replies
View Related
Dec 4, 2011
I'm trying to share files between my Mac OS and my Windows 7 OS. I have both OS's on my laptop and I want to make it where I can easily transfer files between each OS. I have googled this but have found only file sharing on the same network but with different computers, not dual boot.
View 11 Replies
View Related
Nov 18, 2009
Well here is my issue I have a XP computer that is hooked up with the Printer but I have it set it for to be shared already. When I go to "ADD PRINTER" and i hit the button saying "ADD NETWORK, WIRELESS, BLUETOOTH PRINTER" it searches and searches but it nevers finds it but when I had vista I had no issues finding it. We are on the same network and workgroup.
I am connected by wireless and the XP computer is connect via wired. What can be causing this because I am completely stumped about this because I am trying to figure out how to print stuff though a network printer. Another thing is I can not find any other computer on the network tab.
View 1 Replies
View Related
Mar 13, 2011
Just wondering, is there a way so that if for example, I have a video folder that is being shared on the network, to continue being shared, even if the computer is turned off? I want to be able to share my files 24/7 but I dont want to keep the computer running all the time. Is there a way to share while in a very low power state?
View 1 Replies
View Related
Aug 29, 2009
Having troubles setting this up.
Windows 7 computer working fine - printer working fine (it's a canon ip5200). On Windows XP machine (SP3), I am trying to access the printer. I've tried this a couple of ways and it fails every time.
1) Drill down to printer via the Add Printer searchj for a network printer action. This eventually will ask me to point to an INF file that I don't have (unpacking Canon's printer driver installer to get to the 'ip5200.inf' file will eventually get me a 'Invalid printer file' error even though I can see that the inf file looks like an inf file.
2) Try to add it as a local printer, pointing to the network path (etworkprinter). That installs OK, but it doesn't work.
3) Try to install a network printer giving it a network path. See #1.
What in the heck am I doing wrong? I cannot get Windows7 to add the Windows XP drivers to it's list so I can install it via the network.
View 1 Replies
View Related
Jun 21, 2011
I have a new storage computer here at work running Windows 7 Pro 32 bit. All other machines here are running WinXP 32 bit. The network is in a Workgroup with no domain. Here's what needs to happen: I have a folder on here that ONLY the boss is supposed to be able to see. However, I can't seem to set permissions for only his computer to have access to it. I've followed every tutorial I've found on google and elsewhere to no avail. I can ping the server from any computer, and if I set access permissions to "Everyone" for the folder or any other folder, all computers in the shop can access it. However, when I try to limit the folder to a specific machine, it denies all access to the folder from any computer. If I try to use the Share with option after right clicking on the folder, the other computers in the network aren't listed, and if I try to manually type in the name of the computer (I've also tried using the IP address), it gives me an error of "Windows can not find xxx".
View 4 Replies
View Related
Dec 21, 2011
I have a small network connected via a router.I have 2 printers connected to a computer running on windows 7.i want to share it with a computer running XP on the network.Can this be done??PS:-i am not that educated in networking so you will have to break it down for me.
View 2 Replies
View Related
Oct 11, 2009
I know this question has been asked several times, and I've done a lot of research into it already, but I still can't seem to change my folder (in this case D:Movies) to be shared an accessed by my Vista x64 primary computer.
When I go into my Network and access the computer, it lets me view the shared folders that I've set sharing on, but when I actually double click the folder to open it I get this error message:
Windows cannot access XXXXX-DownloadsMovies
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. The error code is 0x80070005.
When I diagnose it tells me that the folder is available but my user account doesn't have access. However, I've already disabled password protected sharing, and I've accessed the Public section of my sharing settings and enabled everything that I read in previous posts, all to no avail.
I also read up on selecting the folder, then clicking the Share With.. tab and selecting "Everyone Read/Write", every time I try doing this as soon as I select the Share With.. tab again it's defaulted back to Nobody.
Here's the part I'm not sure could be causing all of this:
This folder, Movies, was originally on my Main Desktop PC (the Windows 7 machine is my new downloads machine) I bought a new 1.5TB sata2 hdd and set it up on my x64 vista (main) and transferred my movies folder on to it, then I uninstalled the hard drive and reinstalled it on my windows 7 x64 (downloads/secondary pc)
So the folder was originally on another computer, but was swapped via my new 1.5 TB hard drive, I'm not sure if this is related as I'm not a guru when it comes to any OS.
Regardless, I really need to get this folder on my Windows 7 machine accessible on my Windows Vista primary as soon as possible. If you need anymore information regarding either of my computers please let me know and I'll gather it as fast as I can,
View 2 Replies
View Related
Feb 21, 2011
A program called Windows Media Player Network Sharing Service keeps using up all the physical memory. I end the process in windows task manager but it keeps starting up again. I tried to delete the file that keeps starting up but ofcourse that would cause some problems and it also said that I need permission from 'Trusted Installer'.
View 3 Replies
View Related
Jan 17, 2009
I would make four partitions: 100GB, 100GB, 50 to 80GB and the rest for storage. You do have a 500GB drive???
The first one I would install is XP to the third 50 to 80GB partition; that way you won't have to mess with boot issues but I wonder if XP will then be the (I don't know the term) default partition that can't be formatted from within an OS; do you know what I'm referring to?
Then I would install Vista to the second 100GB partition; then Windows 7 to the first, as that would give 7 the fastest partition for future use.
I would be very interested in your thoughts on this setup, this is the way I intend to install to the new machine when I get it finished.
I just tried to format my Vista (the first OS installed on the first HDD) from within my Windows 7 and the format option is grayed out. This is what I was trying to say in the statement below; the reason this would ever matter is for any reason you should ever need to format the partition XP (or the first installed OS) is on you would have to use a third party partition manager to do so.
View 1 Replies
View Related
Oct 5, 2009
My system is a Asus L1N84 WS SLI FX74 This system has two physical processors on it. So its two dual cores making it 4 cores.(this is the main focus of this thread being started)
I have had this system since vista was new.
When I biult this system I ordered a copy of Vista Home Premium
When I got it up and running I noticed that when I went to system info it said I had 2 processors. Well I called Asus and AMD and Microsoft. And all of them said that the reason I was seeing two processors is because I have two processors. Me not wanting to hear it did alot of research until I found one thing that told me I was just being told what they thought would get me off the phone with them. And I am having the same issue with Windows7 RC1
What I told them is that is not a good answer because my previous system said I had 2 processors and that system was an AMD 4200 X2
So it said 2 processors and it was just ONE dual core.
Not to mention that this board got a horrible write up against Intel which caused AMD to trash the whole 4x4 idea. Bad for them because this is one hell of a system with all four cores running. Which were not running during those benchmarks against the Intel quad 6700 at the time. Remember I said I installed Vista Home premium.
Well it turned out while I was searching Microsofts web site I looked at the differences between Vista Home premium and ULTIMATE. There was my answer staring me right in the face.... Ultimate was the only version that had MULTI PHYSICAL CPU SUPPORT! So I then purchased Vista Ultimate and checked the amount of processors in the system window and also In CPUZ . And there they were......4 processors... Needless to say that I quickly benchmarked it again on pcpitstop and 3dmark 06 and on pcpitstop my numbers doubled!!!
Literally DOUBLED. Because now the other processor was being utilized.
I add in here about the issue with the Intel benchmark just to say that this system is and was totally comparable to any intel system at that time and AMD scrapped it because of a faulty test!!! The sites that did their reviews were only running one of the dual cores which is why it was only slightly better then one FX 60 in there reports!! THIS is over DOUBLE and FX 60 with all 4 cores running!
Anyway... Now to the issue about Windows7 ULTIMATE........
THEY didnt put that support in Windows7 Ultimate making it no good to use with a server board!! And now I have this OS in here and am only running on 2 cores AGAIN!!! What will microsoft do to fix this issue for all the people that want to run Windows7 in their servers boards INSTEAD of the new WINDOWS SERVER 2008?
How do I get my processors to show up?? Anyone have any answers?
The Microsoft technical support told me that they cannot answer that and I would have to call technical support after I purchase Windows7 and have the issues!! WHY WOULD I WANT TO PURCHASE IT WITH THIS ISSUE !!! ANYONE?? Help please? Microsoft?
Just to clarify the post above for anyone that says it.... I have ULTIMATE . that IS the RC1. And it says 2 processors and cpuz which said 4 before I installed this NOW says 2!
View 9 Replies
View Related
Dec 16, 2009
I'm planning to buy a new PC with Windows 7 (English) and not sure what version I should buy. I need to be able to switch into Japanese language mode for writing Word documents and composing/reading email sometimes. I do not need the desktop, menus etc. to be displayed in Japanese, however. I've found some info on the Internet and MS web site but still confused:
1) I have read that LIPs can be installed on any version of Win 7 but looks like Japanese must be installed as a full install (no parent language). If this is the case, can I setup 2 user accounts and configure one for English and the other for Japanese?
2) Do I need to have Win 7 Ultimate or Enterprise edition to do what I want to do?
View 6 Replies
View Related
Sep 13, 2009
i use a triple-head configuration with my center monitor specified as primary display. i have made some 3x Wide screen wallpapers, and i set them as the desktop backgrounds. it works fine with one caveat:
the images left most border starts on the center display --the image is triple wide, but the right-most third wraps around the the left display.
any ideas on how to properly center the image? i need the center display to be the primary as certain applications throw a fit when they are run on a non-primary channel.
View 5 Replies
View Related
Oct 22, 2009
I have been having a problem with trying to get Multi-Monitor resolutions set up. On XP my monitor setup is capable of 3360 x 1050; with 7 it automatically separates them and sets each resolution to 1680 x 1050, I would like to enable Span-extended desktop and have had no luck, CCC on XP allows this and on 7 the option simply isn't there. I was just wondering if I was overlooking something.
View 4 Replies
View Related
Feb 1, 2009
Any of you guys use multi monitor set ups?
I have 3 screens which ran flawless with xp. In desktop Windows 7 is cool, as with browsing etc.. But when it comes to gaming i'm getting nothing but headaches... having to disable my outer screens struggle with resolutions. I hope there is a fix soon
View 0 Replies
View Related
Apr 8, 2011
I have a hp multi function hooked up to a win7pc by usb connection, I also have a laserjet hooked up to my ethernet lan. I am trying to install a hp 3310 with a ethernet connection. The latest Windows 7 hp software gets almost to the end of the install routine until it asks how I want to connect it. I choose ethernet and it checks whatever, it shows my 3310 connections correctly and then tells me it cant connect. Windows 7 add a device cant find it. I can ping the unit ok, and I can connect to it through the ip address, and i can scan through the browser. If i go to win7s add a printer it installs a basic print driver and allows me to print as normal. All other xp pcs on the lan can print to it.I would dearly love to use the scanner on the 3310.
By the way the 3310 worked with all functions when it was connected via usb to a xp pc.
View 9 Replies
View Related
Aug 20, 2011
As you increase the number of processors the performance improvement diminishes compared with the expected result -- for instance a system with 8 processors won't perform 8 times faster than a system with one processor due to the ovehead of managing the extra complexity of the interaction of all the processors. (Note the system will still be FAST of course !!).
Now wouldn't it be better to design say 128 and 256 bit architectures in the OS so you could still run many tasks concurrently but without the overhead of the multi processor environment - or at least have far less processors in the MP environment.
it was rumoured a while back that Windows 8 would have some 128 bit possibility -- I don't think there are any commercially available chips yet but thats only a matter of time.
View 4 Replies
View Related
Jul 9, 2011
Certain online games we play use P2P connections. We are playing from the same network thus have the same IP address. We have opened/forward required ports for the game, enabled DMZ, tried using Hamachi to no avail. Would purchasing a 2nd IP address from our ISP fix this problem?
View 9 Replies
View Related
Dec 13, 2009
Is it possible to run the 3 OS', 7, XP and 98SE via a multi boot setup and if so can anyone advise on how to do this or maybe have a link to a Tutorial showing how it can be done.
Reason i ask is i am looking to play some old school games that you just cant play regardless of Compatibility Mode and other 3rd party apps.
View 10 Replies
View Related
Jan 6, 2010
I am planning on buying a copy of Windows 7 Home Premium (64 bit) so I can run DX 10 and 11 and install more memory in my computer.
I currently have two hard drives installed on my computer,
(1) a 160 GB (split into 3 partitions) with Windows XP (32-bit) installed on one of those partitions
(2) a new 640 GB with only a few files on it that can be deleted.
I want to be able to have the option of starting up in either XP or 7.
My question is this: if I install 7 on the new HD, will I still be able to see that Hard Drive's space in XP (and vice versa with 7)? Will I still be able to install and run programs from both drives in both OS's? Will installing an OS in the second drive restrict the use of the space on that drive by other OS's?
I would assume that it should work fine, but I wanted to find out if anybody has had problems with this before I go and spend $100.
View 4 Replies
View Related
Oct 27, 2012
Is it possible to Set up a multiseat on windows 7? If so can you provide with the steps even if it takes hours its fine..
View 2 Replies
View Related
Mar 30, 2011
Installed Home Premium on an HP workstation which has 2 physical CPU's. Only recognising a single CPU in task manager but there are 2 listed in device manager?
View 3 Replies
View Related
May 16, 2009
Anyone found a working all in one system monitor gadget?
View 5 Replies
View Related
Dec 30, 2008
Any suggestions to deal with multiple monitors in Windows 7? I was using UltraMon in Vista and really liked what it did. With all the changes to the taskbar in 7, UltraMon has lots of issues.
Is there anything new in 7 dealing with the taskbar (across multiple monitors)?
View 9 Replies
View Related
Dec 18, 2010
I have a setup with three monitors using the one in the middle as the primary one. It seems that I can't place icons in the lowest row of the primary monitor, as they will snap and jump to the row above it. If there is another icon above it, this icons kinda gets in the way and prevents the problem from occuring. It works fine on my other monitors as there is no taskbar there. For some reason, this behavior only occurs when there is a monitor to the left of the primary one, and I've noticed the same thing in Windows XP. The system seems to adjust the bottom of the icon space to work with the leftmost monitor. Is there any way I can fix this? Adjusting icon spacing won't help. Also, is there any tool to backup and restore my icon layout that works in Windows 7 and not just XP? It gets messed up when i switch from extended desktop to AMD Eyefinity mode and vice versa.
View 1 Replies
View Related
Jul 31, 2009
I read recently that upon release, windows 7 will have multi-monitor taskbar support, which I'm very excited about. Is anyone able to confirm this, as it seems that they were already shipping Windows 7 when this news emerged.
If I can pin programs to one monitor or the other, and have 2 "show desktop" buttons, then I'll be a very happy man.
View 8 Replies
View Related
May 10, 2011
can microsoft implement native multi gesture support for touch pad for windows 8, it like a small touch screen isn't it? as of now it works randomly with some application and not other eg zune, windows explorer doesn't work etc. the feature is so useful it's supprising that microsoft still haven't include it in their os.
View 7 Replies
View Related
Aug 6, 2011
Since many of the movies that I would like to buy are only in PAL, instead of NTSC format, I would like to buy a internal player that will use either format. It seems that everything that I have found is either external, or the description in the specs is obscure on this point
View 9 Replies
View Related
Feb 23, 2012
For some unknown reason, my multi card reader is not being recognised when I start up my computer. I suspect it has turned off the Auto Start. Can anyone help me please. I suspect that if I could make contact with the reader and turn it on manually all would be well.
View 3 Replies
View Related