Moving SSD With Windows 7 Install
Aug 24, 2011
I have a 320gb (255 free) drive and just purchased a 120gb SSD. I have external SATA -> USB bays and extra computers that can do the transferring. My windows partition is currently only 45gb. The current 320gb drive has 4 partitions 2 of which are 10g+ recovery partitions I no longer want. (and can use the space now that I am on a small drive). Windows 7 built in backup will only image the exact partition sizes, meaning if I was going to a bigger drive that's fine I could resize after. but because im going to a smaller drive i cant even write the image to it. Acronis this got me very close, it cloned the drive (including recovery partitions, but i planned on removed those afterwards) but failed to boot, I ran windows recovery to try and rebuild the boot sector but it wasn't able to. How can I keep everything but switch drives? The best thing I can think of now (and very sad) is to install a fresh copy of windows 7 than erase the install partition and copy over the install partition from the 320gb drive, and I have a strong suspicion this wont go smoothly.
View 7 Replies
ADVERTISEMENT
May 10, 2012
So I spent a lot of time getting my windows 7 install the way I want. I plan on upgrading to a new lenovo w530 when they are released relatively soon. I'm not sure the best way to move my windows installation EXACTLY like it is to the new machine. I will be transferring the physical SSD itself to the new machine so imaging it to a new drive i not a step I need to take.
View 5 Replies
View Related
Feb 2, 2011
In the past I've migrated 7 from one hdd to another by doing a backup to a usb drive, then swapping the drives and restoring to the new one. What I need to do now is a twist on that. My MB is one of the new p67s that has the faulty intel sata ports, and will eventually be recalled. The 4 6Gps sata ports on the board are not affected by the chipset problem, so I plan on just using them instead (plus I just got a 6G seagate drive that I wanted to use anyway). What I envision happening is restoring to the new drive on an entirely different sata adapter and port #, and the system not booting. I assume I could get around this by booting to a command prompt and using bcedit, but am not 100% on that.
View 6 Replies
View Related
Jan 3, 2011
I have the following MOBO:
ASUS P7P55D-E EVO
2X80gb Western Digital SATA Drives
2x2TB Samsung Spintpoint SATA Drives
I have already been using the machine with another 80Gb Western Digital SATA Drive with Windows 7 Pro 64Bit installed and now want to convert to RAID 5 for redunancy in case of Drive failure (We all say we will back up but we are all lazy when it comes to it LOL).I have taken out the original OS drive and plugged it into the E-SATA connector on the MOBO, gone into the BIOS, turned on RAID for the SATA Ports on the MOBO, and connected the 2 X 80Gb Boot drives. Entered the Hardware RAID Controller POST, and created the RAID 5 Volume from the 2 X 80Gb Discs.Now boot with Acronis Wester Digital edition.Clone the Original 80Gb Disc to the new Raid Array.Shut machine off, remove original OS 80gb Disc from E-SATA port.Boot machine.It starts to boot, and gets as far as the Windwos 7 Microsoft 4 Colour logo and then I get an error and then have to boot into Windows 7 from DVD and go through the repair process.When the Repair has run it reports the following:
The following startup option will be repaired:
Name: Windows Boot Manager
Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows Recovery Environment (recovered)
Path: Recoverye52d0bc2-1f15-11df-af10-d764fe3715b8Winre.wim
Windows Device: Partition=D76190 MB)
A copy of the current boot configuration data will be saved as:C:BootBCD.Backup.0001 However it fails to do the update How do I get this RAID to boot successfully? I *don't* want to have to re-install the Operating System as that is just too painful a thought?
View 2 Replies
View Related
Sep 17, 2012
Is it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}
View 3 Replies
View Related
Apr 4, 2012
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
View 2 Replies
View Related
Dec 28, 2012
I originally only had a HDD for my computer with Windows 7 on it. I got a 180 GB Intel SSD today and installed Windows 7 on it. When I installed I made sure to unplug the data cable on the HDD. After everything was installed I plugged the HDD in and made sure it booted the SSD in the BIOS.
I went into the HDD to open Steam thinking that it would open fine. It wanted me to update everything so I went ahead and did that. Then I noticed a ton of random icons on my desktop. I realized all of these were from the Steam folder. I have no idea why they're on my desktop. When I try to delete them off my desktop it won't let me, saying Steam is using it. Is there something I have to do to make my SSD and HDD work together?
Also with Steam; after I updated it none of my games were installed. They are all installed on the HDD but when I try to click on a game it wants me to install it again. One more thing, whenever I open a program in the HDD it wants to update and install it into the SSD
View 2 Replies
View Related
Feb 20, 2011
i got a SSD awhile back and was able to install windows on it and have my users folder and default install folder on my normal HDD. It has worked ok till now but I'm sure i screwed a few things up when i did it because random programs still try to install on my SSD and when the install makes the shortcuts, the paths for them are usually the wrong drive.I want to do a fresh install now, but i wanna do this correctly this time. how to make it so ONLY the windows folder in on the SSD and every thing else that actually takes up a lot of room on the drives goes on my larger HDD. edit: why wont it let me make separate paragraphs, it just smooshes it into a single one.
View 2 Replies
View Related
Apr 30, 2012
Is it possible, and if so how do I go about it/is it something a relative novice could undertake without too much of a problem..?
View 1 Replies
View Related
Apr 11, 2011
I'm buying a SSD and would like to put my OS on the drive. However is this possible? And how I only put the OS on the SSD and not all my files, games, etc.?
View 1 Replies
View Related
Aug 13, 2012
I am making a now computer and am I able to movie it to my new computer without removing from my old one?
View 4 Replies
View Related
Sep 18, 2011
I had to do a reinstall of a Win 7 32bit pro OS for a user, but before I did, I moved her data to my machine, did the reinstall on her and then moved her data to her profile.
I logged in as her, and verified that her "my docs" and favorites were there and that I can access them. However, all of the data icons are transparent (folders on her desktop and the actual data in her mydocs).
Most of it is pictures and movies and I can access them, but everything is clear. I did notice that even the favorites are transparent and they do not show in the browser (IE) even though the link is in fact in the Favorites directory in her profile.
View 4 Replies
View Related
Aug 14, 2011
I moved Windows 7 from a partition on a physical hard drive to a new SSD. It was pretty easy, and everything works great except the hibernate function. The screen goes blank for about two seconds and then comes back on. Nothing power-related appears in the Event Viewer. The PC restarts, shuts down, and even sleeps with no trouble. I ran powercfg -h off and then powercfg -h on to delete and recreate the hibernation file,no offense, but no lectures about how a "clean" reinstall is required or even recommended when moving to an SSD. That's just not true. Similar to upgrading to a larger physical hard drive, all you do is copy the partition to the new drive and continue on your way.
View 3 Replies
View Related
Nov 4, 2012
I have bought a new Windows 7 pc and put my old XP pc out to grass, I have removed the old Xp Hdd and mounted it into a usb Caddy. What I want to do is either use this as a duel boot Windows 7/xp or transfer all my xp data over onto my new pc.
View 5 Replies
View Related
Sep 28, 2010
My Dell Optiplex 740 (AMD) is dying, and my company's IT has given me a Optiplex 745 (Intel) as a replacement.I'm a very lazy person , so naturally, I tried moving the drive with Windows 7 Enterprise x64 to the new machine.It didn't work: * Shortly after boot up, it will restart itself and go into repair mode * It will not be able to repair itself * Starting in Safe Mode also failedAs far as I know, the two PCs are completely different, except the graphic card and hard drives are the same.Is there anyway to "repair" this so it will work on the new machine? I'm avoiding reinstall since I really want to preserve my settings.
View 1 Replies
View Related
Mar 19, 2011
Right now I've got a dual boot with xp and windows 7 on an IDE disk. I want to clone my windows 7 installation to a brand new, empty (Sata) disk. If I restart the system after the cloning, will the SATA disk have a boot record? What boot options will I have? 2 former ones and a messed up 3rd one?
View 2 Replies
View Related
Apr 17, 2011
I'm wanting to move my copy of Windows 7 OEM Ultimate x64 to a new drive, with all the programs and that without reinstalling. I'm wanting to move it from my WD Black SATA2 drive to a SATA3 drive, which will be done via a PCIe Card. If this isn't possible to do, I'm fine using a fast SATA 2 drive.
I'm wondering if copying all the required folders Windows needs, putting them on a same-sized drive, unplugging the WD Black and doing a boot with that in the same SATA port.
View 3 Replies
View Related
Nov 24, 2011
My system CPU fan remains at high speed and the system won't enter BIOS. I got a duplicate HP system and tried to move my Windows 7 HD from the older system to the new one without any luck. Apparantly Windows 7 is protected with some sort of hardware hash. I can't use repair or restore.How can I get my Windows 7 HD to work in this new system? Everything is legit regarding my software keys, etc.
View 2 Replies
View Related
May 28, 2010
is it possible to move my Windows 7 system HDD from old PC (which is dying) to new PC, which has better processor, RAM etc?I am thinking that if I uninstalled all hardware before shutting down the system, then putting the drive into new PC it might work.
View 9 Replies
View Related
Apr 30, 2011
need an exact answer on how to move folders in Windows 7
View 3 Replies
View Related
Aug 11, 2011
I'm upgrading my system (replacing everything but the Antec 900 chassis and a SATA secondary hard drive) from an old P4?800VM with a Pentium 4 processor to an ASUS P8Z68 with an i7-2600k processor. The old system ran 32-bit Windows 7 Ultimate and I plan to do a clean 64-bit install and transfer the license. My question is whether there is any information I need to pull off of the older system before I shut it down in order to make activating the new OS easier.
View 3 Replies
View Related
Feb 24, 2012
I have a lot of programs loaded on my older HP Media center with XP I want to move to new computer with windows 7, How can I move my applications over without havin to reload all the disks. I have many programs on the old system
View 2 Replies
View Related
Aug 28, 2012
I need to move files to my E drive to create room nfor program upgrades,can this be done
View 1 Replies
View Related
Oct 22, 2011
I have Windows 7 and Internet Explorer 9 on my computer. How to save and move my Favorites to another computer?
View 2 Replies
View Related
Nov 28, 2012
I looked at my specific manufacturers toolbox to see details about the drive and I noticed that it has already accumulated over 5 billion writes so far. This thing is a little over a week old. So then I'm looking at my event logs and I'm thinking that every single one of these entries is a small write here and there and EVERYWHERE and it just never stops!! Then I tried to move the logs to my D: drive by modifying the settings within Group Policy Editor (gpedit.msc) and the major ones did move there, but then there are over a hundred different other log categories under windows and there were no group policy settings for those. I was inspired to start this thread by another thread regarding clearing all those log files with a simple bat file. That conversation is here http://forums.cnet.com/7723-19411_102-378338/delete-all-event-logs-at-once-in-windows-7/ They came up with a .bat file that does clean them all out with one swoop. I am not good with those things and I was hoping that modifying something small would enable those certain files ending in .evtx to be moved to a new location and registered within Windows. Otherwise it's a huge amount of time going through each one to change the location from within the Event Viewer.
View 3 Replies
View Related
Jan 17, 2012
I currently have a WD 120GB drive that i installed my win 7 on, but this drive is old and very slow.I have a brand new 1.5 TB drive and i was wondering if there is an easy way to move the win 7 installation to that new drive without much hassle.
View 6 Replies
View Related
Jan 23, 2013
okay so I am at work and whenever I want to maximize a window to fill the left side of the monitor, it for some reason maximizes and centers in between both the monitors. Does anyone know how to fix this? I know that probably didn't make much sense, but I attached a picture to show what I am talking about. I was trying to maximize this window by dragging clicking it at the top and dragging it all the way to the top to maximize, but it centers in the middle?
View 1 Replies
View Related
Jan 25, 2011
No answer was given there, nor in many other forums. Some "experts" even went on to claim it was not even possible. Well, ignore the "experts" and "gurus" that say otherwise, it is possible, and it's easy.FYI: Here is what I did:
View 5 Replies
View Related
Feb 14, 2011
I would like to move windows 7 and some of my games and apps to my new faster HDD, how would i go about doing this correctly? (so it is the boot drive and games run from the new drive)
View 13 Replies
View Related
Nov 13, 2011
My Desktop ICONS keep moving around. Not every time I log on, just enough to be a PITA.
View 1 Replies
View Related
Apr 23, 2012
I have Windows 7, 64 Bit. It is on HDD. In May I will buy 128 gig SSD. How can I move Windows 7 to SSD as well as some other programs effectively? What is the procedure? Also if I want to leave desktop, My Documents, and all other folders on my hard drive, will it be possible. So basically what I am asking is, what will be moved with Windows. Also, I tried twice to backup Windows 7 image, and it failed both times, while I had more than enough space on my external drive.
View 2 Replies
View Related
