Sometimes I am getting the message USB device not recognized when my mouse sticks. I don't know how to check my usb drivers. I am running windows seven. I don"t have another device to try in the USB ports.
View 4 RepliesI use a normal HP mouse, it has been working fine for ages but recently it now and then stops working for a few seconds and then works fine again. I play Call of Duty 4 so it is very annoying to lose because of that. I looked into my device manager and for some reason it shows up 2 mouse drivers. Just uninstalled both and plugged my mouse back in. I have done this before and the second mouse driver seems to be coming back all the time.
View 4 Replies View RelatedI never had trouble with my usb mouse, but now im getting the "usb not recognized". How do i fix that? Theres no drivers for this mouse. Ive red somewhere to turn off the pc and take the battery out and stuff like that, but it seems like magic.
View 1 Replies View RelatedToday I pugged in my iPod shuffle in my Toshiba Satellite laptop. Soon afterwards I removed it. Ever since my USB mouse is not being recognized by Windows. It was plugged in all this time. I tried uninstalling the USB drivers and re-booting, replacing with a different mouse.
View 3 Replies View RelatedIt's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port".
View 6 Replies View RelatedOn my new Acer M7720 (X58 Core-i7-920) I have Vista HP 64 bits working fine with an Conceptronic 2 port KVM switch so I can also use keyboard, mouse & monitor on my old PC. On the new Acer I also installed Windows 7, but here the mous and keyboard are not recogized when connected through the KVM switch.
I have to stick both in the front site USB ports, then baoth are working. When I stick them in the KVM switch, you can here the USB connect sound and both devices are shown under unknown devices, wereas the are shown under devices when connected through the front side USB ports.
Any one an idea how to salve this? by the way the KVM switch is also 'seen' by Windows 7 under devices even though it doens't need any drivers. All conncected devices are shown (I have also 2 USB drives)
Today I started my PC, and everything was fine until I tried to move my mouse pointer. I don't know what's wrong because everything else from the mouse works perfectly fine, right/left click, in browser back/next (I'm using a r.a.t. 5 mouse). I tried reinstalling its software, and also tried different mice. Still only clicks are recognized, no movement.
View 4 Replies View RelatedI rebooted my machine the other night and when it came back on, my Logitech EX 100 mouse and keyboard were non-functional.
They (the keyboard, at least) work in bios, when the adapter is plugged into my laptop, both devices work flawlessly, just on my main machine, it's a no-go. This is maddening.
I downloaded the newest Setpoint version from Logitech to no avail, I've disabled and uninstalled all of these usb devices in my device manager, and tried the adapter in every usb port (there are 12) on my motherboard. All other usb devices work fine.
I am getting a constant error. When the error happens I hear the usb connection alert sound and a pop box appears in the lower right corner of my screen. I tried installing the chipset drivers again and when that didn't work i did a system reinstall. The only us devices I am using is my wired mouse and keyboard. Both usb devices work.
View 1 Replies View RelatedWhile working on my laptop yesterday evening, my mouse & external hdd stopped responding. On ejecting & re-inserting them both started getting this message 'USB Device Not Recognized'.Now none of my three USB ports are working. Though on cross checking, the devices are working on other machine.The message is getting flashed repeatedly. Also, observed that my battery got drained while it was switched off throughout the night. Have never faced either of these issues with almost 20months of working with Windows 7 Pro.
View 4 Replies View RelatedEver since I moved into my new apartment a month ago I've been having problems with my USB mouse. I got a new one for christmas and the problems still persist. When i first moved in it was working ok but randomly not working then it finally gave out. Every time i insert the mouse receiver it would be like rolling the dice whether it would work or not. I've tried my tablet and my memory stick as well and those don't work either so i know its not a problem with the mouse.I've looked through forums online and have tried almost everything:I unplugged the power cord waited and plugged it back in.I've uninstalled all of the USB Root HubsI've unchecked the Allow the computer to turn off this device to save powerI've updated my ChipsetI've updated my BIOSI've tried Microsoft FixitI've installed the driver for the mouse from its website.
View 3 Replies View Relatedwhen i plug my Ipod 4g an message at the bottom of my page says USB Device not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
View 2 Replies View RelatedUSB device not recognized.
View 1 Replies View RelatedI keep receiving this popup in the taskbar. Tried disabling it, dindn't work. I wish to rectify this and I believe my computer thinks this device is wrongly connected or faulty when actually none exist. I left all USB ports unused yet I get this problem.
View 2 Replies View RelatedI am trying to install win7 Home Premium onto a bare Bones PC but the mouse does not work. Checked mouse on another PC and it functions. I am using the USB 2.0 ports
Specs:
CPUAMD Fusion E-350, Dual-Core 1.60 GHz
ChipsetAMD A45 FCH
GraphicAMD Radeon HD 6310
AudioRealtek ALC888S
EthernetGigabit LAN
Crucial M4 SSD 128GB
4 GB RAM
I have a USB mouse which works fine when it is plugged in at boot time.
When I then (when Win7 is already up) plug the USB mouse out and 10 seconds later back in again then it is not working any more.
Another USB mouse on another Win7 computer does not have such problems.
I am trying to connect a Blue Snowball USB Microphone to record stuff with but when I plug it into the USB port it doesn't work. Windows recognizes the device and starts trying to install the drivers but then it fails and gives no explanation. In Device Manager it shows up as "Blue Snowball" but has a yellow exclamation point next to it. When I click on it and try to install drivers it says that there are no drivers available. The light is on the device so it's getting power. I checked their troubleshooting guide and turned the USB cord in the other direction. I've restarted my computer a few times, all to no avail. I am using USB 2.0 ports and my OS is Windows 7 - Professional 32-bit.
I consider the sound card but I can play music and use skype (if I connect a 3.5mm POS microphone to the back) just fine.
I have Kingston 2GB DataTraveler (DT) and windows 7 RTM 64bit does not recognize it when pluged into 2 front usb ports or 2 top back usb ports. Other 6 lower back ports work. I have Gigabyte GA-EP35-DS3 mobo. This mobo has 8 usb on the back and 2 usb headers. One header is used for Codegen 7in1 cardreader+1usb port, other is used for 2 front panel usb ports. Few things ive noticed:
1) my old apacer mp3 player works on all usb ports.
2) most of new higher capacity usb's are not recognized in those malfuncioning ports
3) if i plug DT into Codegen's USB port, DT is then recognized on all ports
I've read this thread, tried instaling new Intel's Infs, tried removing all usb devices exept Codegen's. No effect. Any suggestions for my case?
I have a WD Passport 160GB portable HDD, which worked fine in XP on the same computer before I installed Windows 7.
As many other people experienced, the once the device is connected, it will show USB device not recognized. However, my mouse and keyboard, which are USB also, are working flawlessly.
Besides the Passport, I have a Maxtor External HDD which is not working also, I tried every single USB port on the computer and it just won't work. And this one is powered by a small power adapter, so it should not be anything related to USB power. On the other hand, the Maxtor HDD is visible from BIOS, just not in Windows 7.
My computer is single boot Windows 7 RC 64bit, clean install.
I'm using Q6600, Foxconn MARS P35 mobo, Seagate 7200.10 250GB HDD, PNY 8600GT, OCZ 2x2GB DDR2 800 ram. I don't think the hardware have any problem since in XP everything worked fine, and all the drivers are up to date according to the device manager in Windows 7.
Any advice?
I recently used my new iphone USB got from Fry's (i used before without any problems) to my windows computer -- used itunes no problems -- any backups no problems. Suddenly it stopped working as it is not getting recognized by my computer. Now, getting error 43 on my device manager. I have windows 7 ultimate.I also used my usb with my ipod and iphone to my usb port in my car to use to play music and it cannot recognize it now. My radio turns off when I plug this in. My usb cable is new!! WTH! Then i used another usb in my computer and still won't budge! no recognition? Then used it in my car then to my work computer then to my laptopn and both usb's are not recognized. WTH?Note, all other usb devices work in my computer i.e.: External HDD and mouse/printer BUT my (2) usb cables don't work.
View 3 Replies View RelatedI have a laser projector, and i control it with my windows seven notebook by usb.
Problem is, sometimes by a static shock of other devices or by other causes i do not know of, the notebook suddenly refuses to work with the usb drive anymore and the projector freezes.
but here is the part i want to solve. after replugging the usb drive windows says that the usb device is not regonised.... after plugging out and waiting 2 minutes and then replug makes it work again...if i do it sooner then usally it still shits about the device not being regonised.
I don't get the device not recognized. When I plug device into usb nothing happens
View 2 Replies View Relatedi play my usb with my panasonic recorder and when i try to use it with labtop
it recognized it but can not read
I have recently replaced my laptop with a new hard drive and extra 4GB ram slot,My laptop is a samsung np400b5b-s02uk, i've put in a Seagate 750GB SATA-II HD and a 4GB 1333MHZ Corsair Ram slot, I am trying to install Windows 7 Home (x64) onto it, i insert the disc into the drive but a message appears saying boot device not recognised, i've selected it to boot from CD in the BIOS but still nothing.
View 2 Replies View RelatedUSB Device not Recognized::error while connecting my external hard disk,previously it was working fine
View 2 Replies View RelatedJust built a new system today, components seem to be working fine. Popped in the 64bit install disk and...can't proceed past the first page of the installation because my keyboard and mouse are not showing up.I thought it might have been the usb ports, but the peripherals show up and work fine when I boot into UEFI. The mouse is a Coolermaster Storm Spawn, and I'm trying to use a Razer Black Widow keyboard.I did a google search,o remedy this.[CODE]
View 2 Replies View RelatedWhenever I use one of my USB ports, afterwards I get an error that lasts all the time that says USB device not recognized. I have gotten rid of it but then when I go back and use it again, that error pops up. The usb ports work, I use it to download pictures and other things, but I cannot get the error gone. Someone suggested I unplug the internet completely for a few minutes and it would reset itself, but that didn't work. I put the media card usb back into the port and went to where it says it is safe to remove hardware and then took it out, but that didn't work either.
View 9 Replies View RelatedI've been encountering error Code 43.I've tried a lot and I am running out of options.I'm working on an Acer Aspire 5542G.My operating system is Windows 7.The USB device not being recognized is my Wacom Intuos 4 PTK.
- I've de-installed and re-installed my tablet driver.
- I've shut down and turned on the laptop.
- I've returned the laptop to original factory settings.
- I've taken the battery out, and put it back in again.
- I've de-installed and re-installed universal serial bus controllers.
- I've used CCleaner to clear up my register.
- I've used my google-fu to it's full extent, but I haven't found a fix.
I've been having an issue with the xbox 360 wired controller since I built my new pc. When I plug it in via usb the device is not recognized by windows and no matter what I try it simply will not work.
Things I have tried: downloaded chipset drivers downloaded Software Downloads: Xbox 360 Controller for Windows tried the whole leaving the computer and all usb devices unplugged and off for a good few hours. ininstalled all the usb controllers and rebooted tried it in all usb ports, 3.0 and 2.0 searching for hours on google tried enabling/disabling usb legacy support in the bios tried running microsoft fixit thing (whatever that is) tried updating the drivers manually through the device manager but windows insists that the device is up to date. tried uninstalling and removing ethernet cable to try and force me to choose drivers. windows is fully updated I even bought a new controller thinking the last one was broken. The controller powers up when you plug it in, you can clearly see the green lights around the guide button flash but then nothing happens.
I had an "unknown device" show up in devices and printers a couple days ago. It was also listed in device manager and said it was a USB controller. Everything worked and I've not added any new hardware. I have 2 partitions both with Windows 7 and the error showed in both. I've found that others were having the same issue, some needed drivers, some said cables needed replaced. Before I got serious with the troubleshooting, I read up a little and found a forum that said you should shut down then disconnect the power cord, wait a couple minutes then power up. Sometimes the motherboard needs to reboot and the devices will be reloaded or reassigned as they should be. It worked for me, it was an easy fix to an annoying problem.
View 5 Replies View Relatedi just bought a Trust Thinity wireless media keyboard. It comes with no disc or drivers and the usb receiver is just plug and play.When I plug it in it gives me the message "One of the usb devices attached to this computer has malfunctioned."If I keep unplugging and plugging back in it eventually picks up the drivers and installs, unitil I switch off my computer and then its back to square one.
All my motherboard drivers are up to date and bios is on latest version. Iv tryed uninstalling all my USB controllers and restarting. Iv even installed a fresh copy of Windows 7 64bit and 32bit to see if that made any difference but it hasnt.
The keyboard is brand new and I have tryed it on XP and it picked it up, installed the drivers and worked straight away.