I have dell desktop inspiron 580, i5, 4 gb ram and 500 gb hard disk and my permanent problem is, inspite of changing hard disk, mother board and ram, the computer freezes at ms logo level and does not ever go further. Then the ceremonial tapping of F8 and hitting 'start up windows normally' 4/5 times (sometimes more) after a bit of suspense, suddenly it gets into the welcome sign and goes on. How long can I continue like this? My manufacturers are most willing to change the parts under my present warranty, but I do not think that is the permanent solution for this. I have run the 'win 7 recovery media' disk given to me many times to go back to the factory set up, then installed the McAfee, Skype and Adobe flash player which are required for my use as usual that is all.
Then as usual the reminder for dell, java and McAfee updates come up, I click it to give permission that is all. Even after the McAfee download (it is asking for restarting the computer) it never restarts for my click and freezes at the ms logo level, as if it loves the logo very much and is attached to it permanently. Again start tapping F8 and by chance I get the booting just in case. All partitions in my computer are totally empty and in C only it is showing 93.1 gb free out of 117 gb. I have only the preloaded factory set up only. I am even afraid of downloading movie downloading software of Bittorrent although widely recommended.
I am 70 year old, non technical, using my computer for movies online streaming (no downloading), email and skype viewing with my contacts only. I always delete address bars before shutting down, never click sites asking for mail id or pass words.
I read a lot of answers in the website (all subsequent letters/answers are contradicting the prior ones) and nothing seems to effective (some I have tried). The start up booting I think is a universal problem and win 7 64 bit has no breakthrough method for this.If I use the full hard disk like a software professional, would it be different or worse!
So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
I created an answer file using the windows AIK tool called Windows System Image manager tool. Great tool by the way! Well even better once I get my Answer file to boot from the USB. I created the answer file and copied it to my USB drive inserted the Win7 Ultimate disk in by cd Rom and USB in its port and when I reboot it tells me unable to find boot.
Im using a microsoft wireless mouse wheel to scroll through web pages on IE9 and win 7. I set its speed to the lowest possible in control panel and it works fine.
When i restart my laptop, the speed is back up to full when i scroll, but when i check in control panel >mouse settings, the speed shows that its still set to the lowest setting. I move the slider, click apply and it works again.
how i can get my mouse wheel speed to be consistent between reboots?
I may have misunderstood the literature regarding the language packs or language proofing tools. 1st of all I am not sure if they are the different names for the same thing or not. Are they? 2nd I do not in ay way want to change my UI with a different language. All I want to be able to do is -1- let Office not give me those squiggly red lines when I write in a different language -2- be able to spell-check and grammar check in the other language. And since I often use more than one language at the same time (2 to 3) be able to use all of the languages for spell-check etc. at the same time.What I have legally downloaded are 3 files that have such a series of numbers/letters: X16-37717.exe, X16-37707.exe, X16-37690.exe.
I dont really trust what they say because when I checked the review.. its not that good.. so finally i plan to ask from this forum instead, hoping to get answers..What are the best VCD burning program you guys ever used? I want the one that can accept all types of video and convert it on its own and burn it... Easy to use is a must...I have tried the latest Nero but its not good at converting Mp4 files... because when i burned them... the video moves so fast as if they are fast forwarded but the voice lagg behind... there goes my CD wasted...And i have tried Ashampoo as well but they did not recognize mp4 files, only mpeg... i have video converter but what i want is one program to do it all.. drag the video to the program and all i have to do is wait til its done..hoping to get your replies soon.. any software will do... i prefer the simplest and easy to use.. it can be free or paid.. but if paid make sure its worth it
Not sure how this has happened, but when Win 7 starts up - it is flashing, rapidly (th coloured logo) and then when it gets to the log in screen, the little hourglass(well, round thing) is spinning so fast, it is like it is on speed or something.When I go to type in the password to log in, each letter I type repeats to fill the entire screen log in box.I hanaged to get into the Win 7 after using the "hold Shift 8sec" thing for the keyboard, but win 7 after that is crazy. Any click I make is like 100 clicks, everything is running at hyper speed. I cannot access my CD rom and clicking on firefox or win explorer flashes rapidly and opens and closes quicker then I can keep up.I am running a dual boot with win xp (which I am using now), so it seems my keyboard, mouse and motherboard are alright.I tried a REPAIR with Win 7, and it said there was a START UP error that was fixed, but it is not and things are still running at hyper speed.This is after an update last night when turning off the computer
I just finished a new build and I installed a 40GB SSD thinking it would be enough for just the Windows 7 OS and some drivers. Well, it so happens that the 40GB's rapidly decreased to roughly 2GB's of space... To be honest, I'm not sure how those 40 GB's were used up so fast. I have a couple of programs installed on it such as:
-AVG Anti Virus -NVIDIA Drivers -Motherboard Drivers -Google Chrome
I'm not sure what can bee deleted but I want to delete some of the Windows Service Files such as Windows Mail and etc. but every time i go to delete the folders, it says can't delete because i need permission from TrustedInstaller? I don't know if it was a good idea to buy the 40GB SSD or if I should have gotten something like 80GB. I still have time to return it but I'm not sure if that is the right thing to do because this problem can be fixed or if I should just go bigger.
My desk top used to be what I considered very fast and now same computer alot slower.If it is comming out of an idle mode it will take at least 3 minutes to load a web page. The hard drive is working very hard, it is always running and the light blinking sometimes when not even being used.After being used for 5 min. or so the web pages do load faster but not as fast as they should.Sometimes I get a I.E. not responding message. It's almost like the hard drive is checking something or doing some other work at the same time.I have to the best of my ability cleared out old files and cleaned up what I can. The hard drive is maybe 25% full.
Specs: Dell studio XPS Intell 2.67 GHZ Ram 3. GB 64 Bit
I am running Kaspersky anti viris and have run the scan more than once, it says no problems.
After installing a skin pack from called simplfy,I used a restore point that i created before installing the skin pack ill call it restore point A. i installed the skin pack again and then used system restore to restore to the same point (restore point A) without undoing the last restore which was restore point A. Earlier this morning I tried to save a text file and it said disk space was low.I know that wasn't correct a text file shouldnt exceed 14.75gb.So I checked the disk and it said 0 kb free. Restarted Computer opened defraggler (I didnt do anything with defragler I only used it to look at the graph) and ccleaner (I ran the file cleaner and the registry cleaner which cleared only 299mb) and I noticed that the space was returning back to normal at about 150 mb/sec. After about 6 hours the problem returned and now I'm posting this.
I recently upgraded to windows 7 and before that my batteries lasted over 3 hours and didn't over heat, but when I upgraded the batteries started overheating quickly and the battery lasts for about 30 minutes off of the charger. I also get a message that says I need to replace my battery.
I've got about 8 different Windows 7 boxes (some laptops, a few desktops, and some media machines). The frequency of "inexplicable weird things" and other aggravations has been increasing over time, and just the last few months I've found myself having done at least 4 complete re-installs, and despite this - all 8 of my boxes are suffering various different problems.I am basically loosing WEEKS of work time dealing with pointless fixes to what I thought would have, by now, been a stable operating system.Some (and by no means is this a comprehensive list) of the recent issues I'm facing are BSOD problems on 2 different boxes ("Driver state power failure"), various (but not all) internet programs failling to connect from one laptop, *extreme* slowness one another latop and two media center desktops, an inexplicably "corrupted" registry occurence, and other weird but similar things.
Most of my machines are new brand-name (HP mostly) boxes, with a couple of other ones thrown in. They all work fine using "live boot" linux distro DVDs, and I have no problems with my one other box that's not Windows (a Mac).Do I just happen to have the worlds worst Windows 7 luck, or is this a growing problem with Windows 7 worldwide in general???
When I run Prince of Persia the forgotten sands in my pc, it works properly but very slow. I tried all the ways to make it fast.But it didn't. I am using windows 7.
I have a problem regarding my MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER.going to device manager there is a yellow mark on MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER icon and i was wondering what was wrong.
I am taking an online college course. When answering questions we were advised to first type our answers into micrsoft word and then copy and paste into the website.The school website only has basic spell check that is the reason for copy and pasting.I have Word 2010 and Windows 7.
Not sure if this is in the right part of the forums? but here we go. I am formating and reinstalling windows 7. I have a Dell Inspiron 1720 laptop. Intel 2.3 ghz duel core, cpu. upgraded to 4 gig of ram. done months ago. New 750 gig HDD. New to this install. just bought it. Installed with a dell windows 7 disk. It activated fine. had a few problem with the install. could not install Windows 7 usb dvd tool could not install Office 2010. Did get NOD 32 install and all the windows updates. I figured there was aglitch in the install. I formated and reinstalled windows 7 from a usb drive i created on another computer. that i just installed the windows 7 usb dvd tool on. windows loaded fine, so first thing i tried to install the windows 7 usb dvd tool would not install. so formated and started again. All went well windows 7 activated fine. tried to install the windows 7 usb dvd tool again no joy. so I went ahead and installed all the updates. NOD 32. windows office all went well. tried again to install the Win 7 usb dvd tool no joy. I have googled the problem there is no info out there on this problem. I searched the problem in this forum nothing. I had this tool running on the original install before i started this whole thing and it worked fine. Any suggestion would be great! Nothing invested but time!
I back up my music, photos, docs from time to time using win 7s built in backup toolWhen I back my stuff up does the software backup just the new entries? As it would be pointless already backing up stuff that's been backed up previous.
So anyone used this tool? I have an ISO file that I purchased/downloaded from Digital River and I am trying to make a bootable USB drive. I have a brand new 16GB drive that I am trying to use so it has PLENTY of space on it. Anyway, I go to run to tool and it gets to the part where it says formatting and then it says something like "we are unable to copy your files, check the USB drive and the ISO and try again."
Alright so i'm trying to run bootcamp on my mac, as i have no blank Dvd's i'm trying to use my 8gb pendrive. I downloaded my files for windows 7 as an iso, used Windows 7 USB TOOL, but then it says:
Files copied successfully. However, we were unable to run bootsect to make the USB device bootable. (I've also tried Universal USB Installer, this time with no errors. But when i connect it to my mac, nothing happens.
Playing Spider Solitaire recently I found that the game had speeded up. The deals were displayed instantaneously, which makes it easy to deal twice without realising it. The only change I remember is that I had installed Java VM for a game that required it. That has now been uninstalled, although the Windows Games problem (it is the same with the other card games) remains.
Recently I installed a SSD and was happy with the speed.Boot takes about 14 seconds.I have another 2 HDD.one is Hitachi 1TB 7200 and another one is a Seagate Barracuda 7200.12 750GB HDD.So yesterday,i tried disconnect my Hitachi HDD and boot up my PC.My boot up time is way more faster about 8 seconds and even the windows flag haven't finished.
Sound is playing very fast, sounds like the Chipmunks. Intel(R) D945GCCR (integrated on motherboard I believe) OS: Windows 7 x32, I have uninstalled and reinstalled drivers and have looked for updated drivers and found none. Problem still persists.