I am not a real techy, but I get the basics and I can follow instructions. I am in the middle of the Andes mountains...so I need to fix myself.My PC (Windows 7) today says " There was a problem starting msizqh32.dll The specified module could not be found.I have looked for the dll file named, but it does not come up in a my searches!!!o if it does not come up in a google search, what can that mean? it must exist because the error message names it, and yet no search on for example dll-files.com bring it up.
My HD failed but I had run a backup just before. I restored from backup. It created a Hilda PC user and I also have a Hilda user so I transferred all of my files from Hilda PC to Hilda and deleted the Hilda PC folder. I went to open a .doc file I use frequently and was not able to find it. I had just used it an hour earlier so I know I have it on the PC but now I can't find it. I even ran a retrieve deleted files software in case I had inadvertently deleted it and it didn't show up. I have done a complete search of my PC and external HD and I can't find it.I am nervous because it contained some sensitive information.
I have been denied permission to access my folder. Than I try to slove this problem. I have done this. But all of data in this folder r losting.Now I can access my folder but I can't get my Data. This losting data is so important for me. Please tell me now how can i get my losting data?
My operating system Windows 7 has lost all file association. I have lost it to the point that I can not repair it and I cannot open any file what so ever. I can not download anything to help, I cant even open the internet, my files are gone and went into recovery and it also said that it has no association with that either. I can access some files by going through task manger by holding on CTRL then clicking on new task which directs me to System 32. My friend who is a tech but is not yet certified said the only way I can fix by problem is by wiping my computer clean and reloading Windows 7 on. Unfortunately that the only way I can see it happening considering I can't open any of my files including recovery, disk clean up, Firefox, document, pictures etc. Is there any other way that I can fix this problem?
My desktop was stucked with a blue screen saying � registry cannot load the hive files? After a lil bit research over internet I did recovery console, using windows xp cd that came with computer, I perform these steps at the command prompt, My computer was fixed but now it didn�t have any user account, and some of my important data are not there, though I have some older data. What should I do to get those data back?
User reinstalled Windows 7 failng to back up Quickbooks folder from Users/Public or elsewhere. Reformatted and reinstalled. They had not made a backup.
I have a school report I've been working on for amonths now on my Mum's computer. I recently purchased my own, so I emailed the file from her computer onto mine and downloaded it onto my Office Word 2007. The file was uncompatible with my version of office (even though it was from the same disc we bought for my Mum's computer) so it was always saved to autosave. In order to upload it to the school it needs to be saved to the computer and not in autosave. So I tried to save it, and got a pop-up message that told me it was incompatible but I could still save it with no problems. (i don't remember the exact wording) So I went ahead and hit "yes". now the file is missing from the computer and no matter how much searching I do i can't find it. Any shortcuts or links to it that existed before don't exist anymore.
I keep losing the icons in Explorer, even with a fresh install of Windows 7. It takes some time, but sooner or later they disappear. It's always Internet Explorer first (associated with .mht files) and now I've lost Chrome (associated with .htm).
Rebuilding the Windows 7 icon cache has not worked in the past.
but I've lost the content in the database file of my notes in Sticky Notes 7. !
Is there a possible way to recover this? I have 8 database files, which all containing almost the same content.
I think the problem is because i have stored the database file in Google Drive, and i did not activate the synchronizing option in Sticky Notes 7. So when i was editing on my workstation computer, and came home to my laptop. The content was still the same. To day, when i was going to my workstation computer, it is the same content as my laptop. The content which I've been written last week is totally gone!
I've tried in the recycle bin function in Sticky Notes 7, but there was nothing. I know I've done some stupid things. Cause i didn't active the sync.
Also, when i want new content in my note, i just delete the existing content, and add some new. I'm not saving the database files in weeks, or months or so on (to keep control over the files) I will do that in the future!
Had a power failure during a recovery of an Acronis backup on my C: drive. It seems it happened while Acronis just started loading the backup files? When I restarted the Samsung Laptop local drive C: did not appear in Explorer. Only drive D: and my DVD drive E: appeared (C an D are partitions on the same hard disk). The recovery software was on a hidden partition but when trying to use the Samsung Recovery facility it say Drive C: not found.After trying out suggestions found on the internet I only managed to screw everything up resulting in also loosing the D: drive containing my Acronis backup. The laptop did not start at all. I at last managed to get it going after installing Windows 7 again and I then sit with only C System Disk, D System reserved and E: DVD drive at that point.Foolishly I shrinked the system disk C and created a data disk. That disk is now Data Disk F. and not D as original.The Acronis backup containing all my files and data was on the original Data Disk D:I have used various free software to try and find that specific file. But they all search by drive and the missing file must be somewhere on the disk either as lost or wrong drive letter or something.
I have a toshiba laptop running windows 7 32bit and made some changes to folder ownership that has wrecked havoc on my machine. I am the only user for this machine and am listed at the administrator. The changes I made were under the "users" folder, and the folder that listed my name. I don't even recall why I was tinkering with it but made a change under file folder properties/security/ownership. Since that change, it has done many things, including removing files and folders from my desktop and computer that do not show up anymore at all. It has blocked me from the c: drive. aApop up upon start up stats microsoft visual runtime library error c:program files. and on and on.
I have done a system restore to prior when I made the changes to no avail. it does the restore, but does not change the folder ownership or issues I am having. I have tried to reset the folder under options to a previous setting but that has not worked and now has me blocked from even going into my c: all together.. saying access denied. I have had no luck under control panel fixing this and have done more harm than good. Is there an easy way to get back control of my computer and regain the files that are not showing up. I have been looking for a way, similar to system restore, to reverse the changes to file ownership and give me control of my computer again. I would think this would be easy since im the system admin but no luck so far.
I have a HP Touchsmart 300-1060a (Home Premium Windows 7 64 BIT) which I bought few years back. Now for the last 6 months or so I started getting issues with my machine was not displaying anything at all after turning it on. So I had to hard reset my power from the machine and then was able to see it started displaying again.At first I suspected graphic card (NVIDIA GEFORCE) but then I did my diagnostic test and nothing was found.One day, I started re-imaging my machine as a fresh and then after this it never came back ONLINE. I read all HP forums & even HP Online support was unable to help me to find the cause.Because when I turn on my machine I can see the power light was on and could hear big fan noise but mo HDD activity at all.So at this stage, I suspected either motherboard or BIOS but wasn't 100% sure what could be the real cause because I was sure it was not due to graphic card.So first I re-setted by my BIOS to see if it helps but it didn't came up at all. So then I took my machine to a Computer repair shop (a friend of mine) and we detected it could be due to the regulator which supplies power to the CPU and motherboard.So we replaced that part and now my HP Touchsmart is running fin since then.But I have lost my HP Startup logo with options such as below: [code]
whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
After doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
How to force Windows 7 File Explorer to display ALL audio folder content as normal files in detailed view with file name/size/date and without title/artist/album.
Whenever i take a file and put it onto the my desktop, all the permissions to the file is completely stripped. Leaving none able to open the file.I am able to go into access control and add myself again, but it makes no sense at all..
I am running Windows 7 32-bit. I have a perl script which i want to start everytime computer starts. Setting it as service will be a good option as i can start and restart the service from command line.In windows XP I was using srvany.exe but that is not a good solution. Is there any way I can make this Perl Script which takes in some command line arguments as windows service. Tried using sc.exe, with that service is created but it fails to start.To run that perl script i run on command line:Quote: perl PesrSclipt.pl --arg1 Hello --arg2 Buddy --arg3 Good
The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
I had completed a beautiful 82-slide PowerPoint presentation, but the wav file I embedded was HUGE (about 200 MB) and not to my choosing. I just had to have the music a certain length to span across 82 slides. Is there ANY WAY to reduce the size of this music wav file (so that it conforms to the 50 MB max file size for PowerPoint). I would rather embed this music file than to have a link.
So I found a post on this forum with a similar problem. I'm trying to move a file that is larger than 4GB in size from my main hard drive to an external, and getting the error message in the title. The consensus on the other post was that the hard drive must have been a FAT format, and that too fix the problem either split up the file or reformat the hard drive as NTFS.Well, by all accounts, my computer is telling me that my external hard drive is ALREADY formatted as NTFS, but I'm still getting this error. I would prefer not to split up the file, but other than that, what are my options?
I'll give an example: two files, names 1st_file.avi, 2nd_file.avi, nearly same size, at different locations. Now I deleted 1st_file.avi and 2-3 weeks after deletion, I open 2nd_file.avi (which wasn't deleted) and find that instead of the original 2nd_file.avi, the contents of 1st_file.avi are being played.How can the contents of 1st_file.avi mapped onto the the contents of 2nd_file.avi?
I tried to save a file and got an error on saving it, so I quit the program. The file appears as if it was never saved and doesn't show up in directory listing (GUI or cmd.exe).
However, if I try to rename any other file to that filename, it says "Cannot rename file, because file exists" and appends a number to the end. I cannot remove the number. This happens both in the GUI and cmd.exe as well.
So, basically cmd.exe del says the file does not exist, but ren says a duplicate file name exists....
I have no idea how to delete that "ghost" of a file so I can actually use the filename. I checked folder options and it's not a hidden file or anything like that - it just (doesn't) exist, but it does?
I had an unusual happening on my PC. First noticed some instability while trying to open a file from Explorer, could not scroll down to file and it was jittery. Then, every time I tried to enter on an input line, an endless string of zeros were input and I could not overide or erase. Even on Email addressees. I tried a reboot and the zeros appeared on the start up password line and I could not logon. Same thing after complete power cycle. I suspected a stuck key on the keyboard and tried a different keyboard but no help. So I tried a complete restore. At first, it seemed to have the same problem, but somehow, eventually, I got logged on and now everything seems OK. But I don't really know what caused this and fear it could happen again.
I am using Ajaxplorer which is great but I am having some issues with file permissions. Let's say I create a file which is read only in Ajaxplorer it says it's changed file permissions but when I right click on the file to check it it's the same permissions as it was so didn't actually change.
