I would like to "lock down" the system restore settings after I set it up on my main hd. For some reason it gets changed by either my setup of "daily disk cleaner" or Ccleaner or some other program.
Do you guys know of a way to save a restore point and locking it that no matter what, it won't delete? I made a restore point and then installed Windows 7 service pack 1. The service pack screwed me so bad with software and hardware I used, I regret that I didn't do an acronis backup!When trying to fix the problems, I had reinstalled various drivers and uninstalled the Service pack, thus forcing Windows to create more automated restore points. Since my C drive is configured to use %30 of it's capacity for restore points, along the way, I guess my restore point was deleted because it's not in the restore points list, even if I check "show more restore points".I want to prevent this in the future so I am asking if if anyone knows how to create a restore point and LOCK it so no matter what, my restore point won't get deleted.
I want to restore my system to factory settings.When I purchased my system it has Vista OS installed in it.Later I installed Windows 7 twice.Now if I restore it will Vista be my OS now? I want windows 7 to be my OS.
I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...
Well i have a gateway computer and windows 7 i have lost the cd and i have no access to the admin account since i have forgot the password so im on a standard user account and i need to do a system restore.
Restore system settings and previous versions of file is greyed out on my system, I may have disabled a required service for this. As I'm about to try the X-Fi MB2 mod again as the last time I tried it my system was messed up that it wont even recognize my actual X-Fi card properly. So I'm thinking a system restore can work with this experiment.
My Acer Aspire one D257 will not restore. Error code is 0x8007191. All desktop icons when clicked go to "notepad" and "notepad" showing for everything to the left except for internet explorer. I have tried restore 6 times but it just comes back with. Bottom right hand icons still normal...files can be accessed through start docs. pics, etc. I have backed up to a remote drive all files for safety but just cannot get system or files to restore.System restore did not complete successfully. Your computors files and settings were not changed.Details System restore failed while restoring the registry from the restore point. An unspecified error occurred during System Restore (0x80071a91) The error code has just changed to the above.
I have a few computers at our office running Windows 7 Pro. I currently have a problem with a person in the office who goes around and uses other people's computers. While that is fine and dandy in and of itself, it is the fact that this person is going in and changing desktop resolutions over and over and over which is messing people's settings up. Is there a way to go in and remove any and all monitor resolutions except for the one that the owner of the computer wants to use? What about the ability to lock other settings as well? I found a couple of articles for XP but not Win 7.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
Is there a group policy to lock down the brightness settings that are normally configured into the control panel power options? Or alternatly, can I force these back to particular settings by saving and restoring regsitry keys upon user login?
How can I restore win 7 to factory settings. I have a repair disk, this seems to do nothing. Restore works, but nothing changes(Ugly Virus, I have tried everything, nothing will install) I just want to start over. It is a sony vaio, I dont have an image backup. Can I just reformat or something?? How? I can get it to rec console and choose version of windows, then asks for img disk or restore. Again, restore wont work or go back far enough to do anything.
There are now several ways of locking a computer to block things like internet surfing during a specific time period. I have unfortunately found a problem. All that one needs to do to defeat these programs is to change the system time. I use Kaspersky which allows blocking applications from operating. Is the system time controlled by an accessible software so that it could be blocked from being changed?
my windows 7 system I use for music production randomly freezes. I was looking in the Computer Management Event Viewer and there are ALOT of MOUCLASS error references and also some windows update failures. Could this be causing the random freezes? Also, the system freezes on boot up and I have to reboot then it works fine for a while, but freezes again intermittently. I dont connect this system to the internet except for windows updates and DAW updates.
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
there's something wrong with my HP Windows.o sound for instancehow can i restore the factory settings and start over?will this destroy data I've worked on. [i have backed up stuff]
i got acer emachines e627 laptop and i dont have any cd to restore and i forgot the password. how to restore factory settings without cd and without log in.
I have an inspiron mini, can't find model # anywhere. Is windows 7. I want to restore to factory defaults but do not have the admin password (owner died).
My dell inspirion 1545 keeps going to computer rpair every time i turn on my laptop. It then says it can not find problem and can not fix the problem and then when i hit finish it shuts down. when i try to go to system retore it says Parameter is incorrect and once i hit okay all i have is the windows 7 background picture and cant do anything but shut down comeputer and restart. Then computer repair starts all over again.. i do have the reinstallation disc. My computer is no longer under warranty