Linksys Reset Itself And Now Can't Access It?
Dec 13, 2012Linksys reset itself and now can't access it
View 1 RepliesLinksys reset itself and now can't access it
View 1 RepliesI have no idea what my username and password for linksys router are. I tried to connect to http://192.168.1.1/ using defult (admin, admin) or (blank, admin) but had no luck. How can I reset the username and pass for the router in order to get acces to the settings?
View 3 Replies View RelatedI recently moved downstairs in my household and was overjoyed to finally be able to use the network hub downstairs. Ive been using wireless lately which has served me well for my pc, but not for my Xbox 360.
Anyway I decided to plug in the ethernet cable and see if I might be able to set it up on my pc and then save the settings to a USB stick so I could use it for my 360 (right now it wont connect, says it cannot get an IP adress).
I didn't set up the network (my father did) so at this point I cant fiddle with the settings. Everything should be working, but its not.
When I plugged my pc directly into the hub upstairs it worked perfectly, but for some strange reason down here the connection comes up as
Unidentified Network, No Internet Access
Has anyone else had this problem before? The hub should be working (i even plugged it in after taking the cables out, resetting it if you will, no dice).
Also, forgot to add, it says that there is no connectivity, but I checked the connection and it automatically gets the ip and subnet address, which works fine with the wireless.
install correct procedure and can access intenet by installing wrt54g linksys router v8 to my pc os windows 7,intel core i3..
View 1 Replies View RelatedMy idiot self put a password on my computer to protect it temporarially, then by gods sense of humor the computer shut down through loss of pwer. But the password didn't save correctly and now I can't get on my account. It's the only user, and whenever I try using safe mode with command prompt, it goes to the user log in screen, which defeats the purpose.In short, I need to reset my passdword, while not being able to log on in any way through the username. I would rather not have to wipe my harddrive, I have no recovery disc, nor partition for some reason. If I have to I will wipe my harddrive then download Windows 7 again, but I need to know how to do that first.
View 7 Replies View Relatedcurrently running Windows 7 64-bit, and have had no troubles with my internet in some time. Finally went ahead and set up security on my Linksys router today, but immediately after my PC could no longer connect to the network.There are two laptops, a desktop, a Playstation 3, and two smart phones that all have no troubles with accessing the network now, but this specific desktop continues to show limited access, despite having full bars.
View 2 Replies View RelatedI have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router.For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection. If it matters though I can connect fine to the internet from my Laptop and my other devices.
View 4 Replies View RelatedSitting here in class and our professor was telling us admin it disabled by default in Vista/Windows 7 now for security reasons. I mentioned you can access it from a command prompt based program that comes in a bootable iso format you burn on disc.
I can not for the life of me remember what the name of that program was but a couple years ago I was working on a Win Vista system that got a virus that locked out the user by changing the user account passwords.
We Googled, found this program you burn on a CD and it brings up a menu that will allow you to reset the user account password, or log into the admin account.
I have a Toshiba Laptop that after installing Dragon speech hardware somehow after shutting down my laptop it lost the password.Therefore I cant boot my laptop. How ca I reset my password without having a flash drive equipped with a reset wizard?
View 2 Replies View RelatedI'm trying to reset the popup blocker in explorer but can find tools to do the reset.
View 2 Replies View Related74 deg here in Fayetteville Arkansas USA.for MARCH 1ST we still have a chance of a Freeze till April 15...6 Weeks!Windows7 Home Premium
View 10 Replies View RelatedI had to reset my computer to factory settings a while back. I've done nothing to it except download advanced system optimizer and windows antivirus. This was a miracle alone due to the fact that my Computer locks up for extensive periods of time and will barely ever finish a task; such as transferring a picture to USB drive, scan, or any click command. It has never done this before the reset.
View 9 Replies View Relatedi bought a laptop from a pawnshop and its locked. how do i reset the user password without a usb flash drive or floppy disk
View 4 Replies View RelatedSo I can't install my Linksys WUSB100 drive in Windows 7. It wouldn't complete installation, no matter what I do. The software doesn't allow it to download onto the computer and then be installed. HELP. I'm kind of a computer noob so I don't have any experience bypassing the security in windows 7 to install it.
View 2 Replies View RelatedI'm looking for the above mentioned driver. Would anyone happen to know if this is available somewhere? It's not on the Linksys site, yet.
If you know and, for some reason, don't want to share it on the forums, could you please PM me the info. to me?
I have been trying to get my wireless adapter mentioned above to work for 2 hours in order to get internet with no luck.
View 1 Replies View RelatedAny drivers would help me out alot, jsut got Windows 7 64-bit, wondered if there are any drivers out there at all?
View 2 Replies View Relatedi have this wireless card not sure of the model, it comes up as a linksys wireless g pci adapter in the device manager from the windows update drivers in x86
but i would like to use it in x64. so i searched a little bit and it found it to be WMP54G but im not sure if i really believe it because the card it self has no linksys model/version number on it.
PCIVEN_1814&DEV_0201&SUBSYS_00321737&REV_01
PCIVEN_1814&DEV_0201&SUBSYS_00321737
PCIVEN_1814&DEV_0201&CC_028000
PCIVEN_1814&DEV_0201&CC_0280
can anyone help me out, if there really is no x64 drivers can someone post the most current x86?
I have the linkys wireless g usb network adapter, its very popular, but doesn't get along well with linux or x64 os's.
Since the install of the RC ive been crashing, and it turned out to be the wireless adapters fault, so i thought back to when i had to get it working with linux, i was pretty sure their were x64 drivers. Ralink chipsets based wireless devices
SOME of the linksys wireless adapters have a "Ralink" chip in them, you can find 64 bit drivers for some of the adapters. I downloaded the one i needed (the first) and installed the software. I then went to update the drivers i had for the wireless adapter and was more than happy to find out that "Ralink Linksys Wireless 54g USB Network Adapter" right under the current 32 bit driver. after you install the software go to
Start > Contro Panel > Hardware And Sound > Device Manager > Network Adapters > Double click your current wireless device, > Driver Tab > Update Driver Software > Browse My Computer > Let Me Pick, > Select The RaLink Driver And their ya go!
After searching google for the past 6 hours and trying just about every driver that even remotly seems like it would work I decided to make an account here and ask you for your advice.
I am running Windows 7 Pro 64bit and it just doesnt want to connect to my network. Ive tried using linksys drivers, Railink drivers, some other drivers someone said would work as well as many of the preinstalled ones. Most of the time i manually search for the drivers and and pick the linksys ones for the list of drivers i get:
"Windows found driver software for your device but has encountered an error while attempting to install it "
"the device cannot start (code 10)"
I would really appreciate some help on this matter. Im hoping i dont have to buy another adaptor but if i do can you guys suggest som that work with 64bit systems.
by the way: this adapter worked flawlessly with Vista 64x without any drivers at all, i was simply able to use windows network manager to connect to my network.
Ok i used the MS compatibly site to see if the linksys WMP110 was compatibly with windows 7 and it said it was, So i bought it installed the drivers (which were actually vistax64 driver) it worked for a bit and then the computer started restard, try change the PCI port same problem,, Windows 7 did not auto install drivers for it i had to manually do it
Does any know of a good wireless card that works with Windows 7 with out any problems
after i reset my router my ps3 and ipod cant connect to it. And i typed in the IP adress in the browser then it shows a verizon page. I type in admin password since its the default, but the screen falshes and has me re do it over and over. I cant get pass that page.
View 1 Replies View RelatedI have the adapter,but I need the up dates for the driver so I can puy it in manually.i am using some one else`s computer right now.Can u send me the software for the drivers?
EDIT: I have a linksys wireless-8 2.4GHz model # wusb11 and I need to up date my drivers.I am on some one else computer right now,What can I do?
all your drivers have to be loaded go to the start button and in the search box type in "services" once you get the services on scroll down to the wlans and make it automatic and then click to the top left and choose start i will send you a link from Internet so that you can watch how they fixed it. [url] . tip this link in and it will show
View 3 Replies View RelatedHow do i download and transfer information from that download to a flashdrive?
View 1 Replies View RelatedHow can I update my software for the linksys.
View 1 Replies View Relatedi have a linksys router and i need to know how to reconfigure it...
View 4 Replies View RelatedI am using Windows 7 Ultimate x64 and have a trusty EPSX3 PrintServer that works flawlessly under WinXP using LPR for Ports 1 (L1 - LaserJet) and 2 (L2 - Deskjet). My wife's laptop is running Vista (Enterprise I think) and also works using LPR for both although is a little squirrely sometimes. I recently got Windows 7 and installed the LPR service - Port 1 works fine but Port 2 WILL NOT work - PERIOD.
View 3 Replies View Relatedwhere can i download the Linksys setup cd-rom for a wrt54g?
View 7 Replies View RelatedWell my LinkSys stuff worked with the Beta Build 7000 and now it WON'T work with the 7100 Build for the RC1.
View 2 Replies View RelatedI recently bought a linksys E3000 router and has been working great for a couple of weeks. Then yesterday it started to disconnect like every 50min? I would have to go into the router settings and just change back to dhcp from static then go back, then it would reconnect?
View 3 Replies View Related