Using Linksys AE2500 Adapter, Keep Getting "limited Access"?
Apr 16, 2012
I have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router.For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection. If it matters though I can connect fine to the internet from my Laptop and my other devices.
View 4 Replies
ADVERTISEMENT
Dec 28, 2011
So for several days ive been trying to get a wireless adapter to work on my esktop(windows 7 home premium 64bit). After a D-link xtreme N failed to function, I traded it in for a Linksys AE2500.Both devices failed to install correctly because they could not be detected by the install setup. Manually installing drivers would not work, errors would come up.The AE2500 would be detected when plugged in, then fail to install properly, then refuse any manual drivers. In the device manager it would be error 10, unable to start.It finally worked by a chance of luck, when I uninstalled the ports in my USB list.
So basically it will only function if I have the Enhanced USB ports uninstalled or disabled(it also has to be plugged in at the time of uninstall/disable). Doing so will cause it to automatically install its drivers and start working(it will then immediatly nag, that the USB port isnt 2.0 high-speed and claim that its not functioning at full speed). However, as soon as i reboot the machine, or run an update, or scan for hardware, the Enhanced USB ports reinstall themselves and the Wireless Adapter gets booted back to error 10
View 2 Replies
View Related
Nov 5, 2011
currently running Windows 7 64-bit, and have had no troubles with my internet in some time. Finally went ahead and set up security on my Linksys router today, but immediately after my PC could no longer connect to the network.There are two laptops, a desktop, a Playstation 3, and two smart phones that all have no troubles with accessing the network now, but this specific desktop continues to show limited access, despite having full bars.
View 2 Replies
View Related
Jan 27, 2012
My new Samsung laptop has just stopped allowing me access to the internet. Its not a problem with the router as I have a wired connection to a desktop that is fine. My laptop has been working ok but now I just get 'Limited Access' from the status bar. All the other checks have been made with ISP the Intel(R) Centrino(R) wireless N130 is supposed to be working according to the network properties dialogue box. Also have wired the ethernet from desktop to laptop and still the same response so narrowing it down to the possible driver software.
View 1 Replies
View Related
Nov 24, 2012
My laptop has been playing up for the past two weeks, it keeps displaying 'limited access' despite my adapter claiming to be connected.I have a Toshiba Satellite Pro c650 and the adapter is the Atheros AR9285.I have system restored multiple times after which the internet works fine, its when I turn my laptop back on the problem seems to reoccur.Wireless Network Connection status says that my laptop is not connected to IPv4 or IPv6. I have no idea what any of this means and have been going out of my mind trying to decipher computer language.
View 1 Replies
View Related
Nov 30, 2012
I have a Linksys Wireles-G USB Network Adapter (Model #: WUSB54GC) that wont fully connect to my home Wi-Fi network. "Limited Access" is as far as I can get. The Windows Troubleshooter just says there might be a problem with the driver, even though I downloaded the latest version driver and installed correctly.
View 9 Replies
View Related
Dec 9, 2009
i have this wireless card not sure of the model, it comes up as a linksys wireless g pci adapter in the device manager from the windows update drivers in x86
but i would like to use it in x64. so i searched a little bit and it found it to be WMP54G but im not sure if i really believe it because the card it self has no linksys model/version number on it.
PCIVEN_1814&DEV_0201&SUBSYS_00321737&REV_01
PCIVEN_1814&DEV_0201&SUBSYS_00321737
PCIVEN_1814&DEV_0201&CC_028000
PCIVEN_1814&DEV_0201&CC_0280
can anyone help me out, if there really is no x64 drivers can someone post the most current x86?
View 4 Replies
View Related
Aug 12, 2009
Using a Linksys USB Network adapter WUSB11 Ver. 2.6, with windows installed driver, Windows could not even detect networks within range. The "troubleshoot connection" option is no help. I uninstalling the driver and installed the downloaded driver from the website for Windows Vista and rebooted. Same problem, no networks even detected, even though the computer running XP 2 feet away could connect and this computer when it was running XP connected fine with the same USB adapter.
I decided to try a hard wire to the on board adapter. No problem, except, I don't want a 20 foot cable running through my living room to the computer room.
So, I bought a ConnectGear Wireless N USB Adapter (WU260N). Windows auto installed drivers, so I uninstalled, and installed drivers through the DVD Setup wizard that came with the adapter. Windows sees connections now! But when I click on my network, it doesn't even prompt for the WEP passkey for my router.
It does prompts for a passkey when trying to connect to my neighbor's. I rebooted the computer and the modem and router, same problem...it won't prompt for a passkey for my router. Something's wrong with my router settings, right? Thinking it is the WEP configuration issue, I changed the router to WPA2 Personal with a passkey and rebooted the computer, modem, and router. It prompts for a passkey now, but will not connect. I changed the router to disable security, rebooted the computer, router, and modem. The computer STILL won't connect, even though the computer sitting 2 feet away has no problem.
I feel like I'm sooo close, but have run out of ideas to fix this. I would really prefer to use the Linksys USB adapter, I originally bought since I can't return it now. But if the new ConnectGear is my only option since it at least sees connections, I'm okay with that. I just want this computer on the internet already!
View 1 Replies
View Related
Nov 4, 2009
Same question for me: I just bought a new computer for my kids that is running Windows 7. I bought a Linksys WUSB54GC G USB Adapter by Cisco. I just found out they do not have the driver for Windows 7 yet. Can anyone recommend a USB adapter that works with Windows 7?
View 1 Replies
View Related
Aug 15, 2011
Windows 7 doesnt seem to reconise the drivers is there anywhere i maybe able to get some up to date drivers that will work with my bluetooth adapter with windows 7.
View 1 Replies
View Related
Oct 25, 2011
i need driver for linksys wireless -G 2.4GHz (802.11g) with model no WMP54G, version 4.1
View 1 Replies
View Related
May 3, 2012
I have found the Ralink site just fine; which specific package should I download for a Win7 64 bit running the WMP54G adapter?
View 6 Replies
View Related
Oct 12, 2009
I've been using windows 7 32 bit for quite awhile now. But i really want to use the 64 bit windows. However i face the problem that right after my wireless installation, i am unable to get windows to recognise my wireless adapter.
As such i cant install the driver and since i lack the internet, i am unable to run windows driver update, so i cant search for the driver online. any ideas how i can solve this problem other than buying a new wireless adapter? im using a linksys wireless- G, model No: WUSB54G, wireless adapter
View 9 Replies
View Related
Oct 26, 2009
I believed the hype, waited to buy a new computer until 7 came out. Been doing this since before there even WAS Windows, and it does it to me every time. Everything was supposed to work that worked with Vista, which was supposed to run everything that ran on XP, etc. - I got the computer, a Compaq desktop, got a Linksys wireless adapter to go with it. Wouldn't install. Wouldn't even recognize the dang thing was plugged in.
Called Linksys, talked to some woman in Indonesia who told me there was no driver for Windows 7 yet. Went back to BestBuy where I got the adapter, thinking they could help. Seems their geeks aren't any geekier than I am. Got a refund, bought a Belkin G family. At least the computer recognized that the Belkin is plugged in, and it knows there is a signal, but it refuses to connect.
That's weird. Good signal, knows it is a Motorola adapter, but will NOT connect! Re-installed it in compatibility mode. It just laughs at me. Seriously, can I go back to DOS? Barring that, is there anything else I can do besides wait for an adapter to ship with a driver that works on 7?
View 2 Replies
View Related
Nov 25, 2009
I recently upgraded to windows 7 professional, and now my network adapter does not work. I have a Linksys WMP54Gv4 wireless network adapter. I checked with Linksys and apparently they don't have windows 7 drivers yet. If anyone knows of any fixes or ways to get around this problem I would really appreciate it.
View 2 Replies
View Related
Dec 12, 2009
I have Windows 7 Pro installed on my PC, which uses a linksys wireless USB adapter for internet. I have the latest driver installed, but what happens is the driver won't be retained in the settings after I reboot it. The only way to keep this from happening is to hibernate the PC. Never had this problem before and it seems very odd to me since I don't see a reason for Windows to delete the driver.
View 4 Replies
View Related
Nov 1, 2012
I need a good link to a driver that will work on windows 7x64 for a Linksys Compact Wireless-G USB adapter. Model # wusb54gsc ver.2...
View 1 Replies
View Related
Apr 19, 2009
we have just installed windows 7 and need a hardware driver for our Linksys Wireless-G USB network Adapter with Speedbooster.
We have tried a version 2 driver which has failed. Windows 7 says 'wrong driver'. Where can we get a driver that works?
View 3 Replies
View Related
Dec 1, 2009
I have 7 x64 installed on my computer and after doing a little research found that my old Linksys WMP54GV4 wireless adapter should be compatible when paired with the Ralink RT2500 driver.
Well I updated the driver and everything went smoothly. The card is recognized and connects to my router with full signal strength. However, I have no internet connectivity.
Does anyone have experience with this particular issue? I'd rather not have to spend $50 on a new adapter.
View 2 Replies
View Related
Nov 10, 2011
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies
View Related
Jan 13, 2009
Driver for Linksys Wireless pci adapter will not install on Windows 7 x64. Is there anyway I can force it to install or extract the driver somehow? It worked fine in my Vista Home Premium 32 so it should work right?
View 9 Replies
View Related
Dec 19, 2009
I need the drivers for the Linksys Wireless-G USB Network Adapter with Speed Booster. The model number is WUSB54GS, ver. 1. I am currently running Windows 7 Ultimate 64-bit version.
View 7 Replies
View Related
Jul 14, 2011
I installed the driver correctly. It comes out as a device, but when I go to connection settings(Im trying to connect to my dads network)It says no connection options are available.
View 2 Replies
View Related
Sep 25, 2009
I really think the wmp54gv41x86 is giving me trouble, I have the latest driver for it from the site, but it's giving me lag spikes when playing games, ect. And BSODs randomly. I heard about the Ralink option, but the only drivers I could find were for 64 bit, but I'm running 32 bit, and the ralink site, had this installed, but I ran it, and nothing happened, and I tried manually installing w/e was in the ralink thing, but nothing was there, and nothing new was in system 32, so.anyone know how to get the 32-bit ralink drivers that work with wmp54g v4.1? On windows 7 ultimate 32 bit?
View 5 Replies
View Related
Dec 9, 2011
Recently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
View 4 Replies
View Related
Oct 2, 2012
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
View 9 Replies
View Related
Jan 19, 2012
I installed a new wireless adapter yesterday in the hope of increasing my internet speed. After installing the driver for the adapter I realised that my internet was no longer working. I can still see the connection but it is limited and doesnt allow me to connect to the internet. I also had a system up date the night before and hadn't been on the internet since that happened so am unsure if this has any part in it.I have tried uninstalling and reinstalling the drivers for both the adapters i have to no avail, as well as plugging my pc into a laptop and using internet connection sharing which also doesnt work.If i run a network repair i end up with two problems found:
1)There might be a problem with the driver for the local area connection adapter
2)There might be a problem with the driver for the wireless network connection adapter They both have yellow signs with exclamation marks next to them.If i type ipconfig/all into the cmd line I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Shouldn't my wireless adapters appear here?
View 4 Replies
View Related
Dec 13, 2012
Linksys reset itself and now can't access it
View 1 Replies
View Related
Dec 6, 2009
I recently moved downstairs in my household and was overjoyed to finally be able to use the network hub downstairs. Ive been using wireless lately which has served me well for my pc, but not for my Xbox 360.
Anyway I decided to plug in the ethernet cable and see if I might be able to set it up on my pc and then save the settings to a USB stick so I could use it for my 360 (right now it wont connect, says it cannot get an IP adress).
I didn't set up the network (my father did) so at this point I cant fiddle with the settings. Everything should be working, but its not.
When I plugged my pc directly into the hub upstairs it worked perfectly, but for some strange reason down here the connection comes up as
Unidentified Network, No Internet Access
Has anyone else had this problem before? The hub should be working (i even plugged it in after taking the cables out, resetting it if you will, no dice).
Also, forgot to add, it says that there is no connectivity, but I checked the connection and it automatically gets the ip and subnet address, which works fine with the wireless.
View 2 Replies
View Related
Sep 12, 2011
My daughter has a laptop connected to our wireless broadband from Virgin and was working fine for last 6 months then overnight it changed to limited access and will not let her on internet. When we try to diagnose problem it says problem with network adapter driver. We cannot update driver as no acces to internet. Shee needs this working for going back to university next week so can anyone help us.
View 3 Replies
View Related
Sep 30, 2012
im having trouble with my wifi. The day before it works fine but then the next day i turned on my Vaio laptop and it says Limited Access to my home wifi. I tried connecting to other wifi but same thing. I tried resetting the router, disabling and enabling the wireless connection but all didnt work. I tried connecting it with the cable directly still cannot connect. Finally i did a system restore to the day before where its working fine, it worked. The next day it says Limited Access again! So im guessing 'something' made my wifi error after that 1 day and i dont know what to do
View 3 Replies
View Related
