we have just installed windows 7 and need a hardware driver for our Linksys Wireless-G USB network Adapter with Speedbooster.
We have tried a version 2 driver which has failed. Windows 7 says 'wrong driver'. Where can we get a driver that works?
I've been using windows 7 32 bit for quite awhile now. But i really want to use the 64 bit windows. However i face the problem that right after my wireless installation, i am unable to get windows to recognise my wireless adapter.
As such i cant install the driver and since i lack the internet, i am unable to run windows driver update, so i cant search for the driver online. any ideas how i can solve this problem other than buying a new wireless adapter? im using a linksys wireless- G, model No: WUSB54G, wireless adapter
I installed the driver correctly. It comes out as a device, but when I go to connection settings(Im trying to connect to my dads network)It says no connection options are available.
View 2 Replies View Relatedi have this wireless card not sure of the model, it comes up as a linksys wireless g pci adapter in the device manager from the windows update drivers in x86
but i would like to use it in x64. so i searched a little bit and it found it to be WMP54G but im not sure if i really believe it because the card it self has no linksys model/version number on it.
PCIVEN_1814&DEV_0201&SUBSYS_00321737&REV_01
PCIVEN_1814&DEV_0201&SUBSYS_00321737
PCIVEN_1814&DEV_0201&CC_028000
PCIVEN_1814&DEV_0201&CC_0280
can anyone help me out, if there really is no x64 drivers can someone post the most current x86?
i need driver for linksys wireless -G 2.4GHz (802.11g) with model no WMP54G, version 4.1
View 1 Replies View RelatedI believed the hype, waited to buy a new computer until 7 came out. Been doing this since before there even WAS Windows, and it does it to me every time. Everything was supposed to work that worked with Vista, which was supposed to run everything that ran on XP, etc. - I got the computer, a Compaq desktop, got a Linksys wireless adapter to go with it. Wouldn't install. Wouldn't even recognize the dang thing was plugged in.
Called Linksys, talked to some woman in Indonesia who told me there was no driver for Windows 7 yet. Went back to BestBuy where I got the adapter, thinking they could help. Seems their geeks aren't any geekier than I am. Got a refund, bought a Belkin G family. At least the computer recognized that the Belkin is plugged in, and it knows there is a signal, but it refuses to connect.
That's weird. Good signal, knows it is a Motorola adapter, but will NOT connect! Re-installed it in compatibility mode. It just laughs at me. Seriously, can I go back to DOS? Barring that, is there anything else I can do besides wait for an adapter to ship with a driver that works on 7?
I recently upgraded to windows 7 professional, and now my network adapter does not work. I have a Linksys WMP54Gv4 wireless network adapter. I checked with Linksys and apparently they don't have windows 7 drivers yet. If anyone knows of any fixes or ways to get around this problem I would really appreciate it.
View 2 Replies View RelatedI have Windows 7 Pro installed on my PC, which uses a linksys wireless USB adapter for internet. I have the latest driver installed, but what happens is the driver won't be retained in the settings after I reboot it. The only way to keep this from happening is to hibernate the PC. Never had this problem before and it seems very odd to me since I don't see a reason for Windows to delete the driver.
View 4 Replies View RelatedI need a good link to a driver that will work on windows 7x64 for a Linksys Compact Wireless-G USB adapter. Model # wusb54gsc ver.2...
View 1 Replies View RelatedI have 7 x64 installed on my computer and after doing a little research found that my old Linksys WMP54GV4 wireless adapter should be compatible when paired with the Ralink RT2500 driver.
Well I updated the driver and everything went smoothly. The card is recognized and connects to my router with full signal strength. However, I have no internet connectivity.
Does anyone have experience with this particular issue? I'd rather not have to spend $50 on a new adapter.
Driver for Linksys Wireless pci adapter will not install on Windows 7 x64. Is there anyway I can force it to install or extract the driver somehow? It worked fine in my Vista Home Premium 32 so it should work right?
View 9 Replies View RelatedI need the drivers for the Linksys Wireless-G USB Network Adapter with Speed Booster. The model number is WUSB54GS, ver. 1. I am currently running Windows 7 Ultimate 64-bit version.
View 7 Replies View RelatedI really think the wmp54gv41x86 is giving me trouble, I have the latest driver for it from the site, but it's giving me lag spikes when playing games, ect. And BSODs randomly. I heard about the Ralink option, but the only drivers I could find were for 64 bit, but I'm running 32 bit, and the ralink site, had this installed, but I ran it, and nothing happened, and I tried manually installing w/e was in the ralink thing, but nothing was there, and nothing new was in system 32, so.anyone know how to get the 32-bit ralink drivers that work with wmp54g v4.1? On windows 7 ultimate 32 bit?
View 5 Replies View RelatedUsing a Linksys USB Network adapter WUSB11 Ver. 2.6, with windows installed driver, Windows could not even detect networks within range. The "troubleshoot connection" option is no help. I uninstalling the driver and installed the downloaded driver from the website for Windows Vista and rebooted. Same problem, no networks even detected, even though the computer running XP 2 feet away could connect and this computer when it was running XP connected fine with the same USB adapter.
I decided to try a hard wire to the on board adapter. No problem, except, I don't want a 20 foot cable running through my living room to the computer room.
So, I bought a ConnectGear Wireless N USB Adapter (WU260N). Windows auto installed drivers, so I uninstalled, and installed drivers through the DVD Setup wizard that came with the adapter. Windows sees connections now! But when I click on my network, it doesn't even prompt for the WEP passkey for my router.
It does prompts for a passkey when trying to connect to my neighbor's. I rebooted the computer and the modem and router, same problem...it won't prompt for a passkey for my router. Something's wrong with my router settings, right? Thinking it is the WEP configuration issue, I changed the router to WPA2 Personal with a passkey and rebooted the computer, modem, and router. It prompts for a passkey now, but will not connect. I changed the router to disable security, rebooted the computer, router, and modem. The computer STILL won't connect, even though the computer sitting 2 feet away has no problem.
I feel like I'm sooo close, but have run out of ideas to fix this. I would really prefer to use the Linksys USB adapter, I originally bought since I can't return it now. But if the new ConnectGear is my only option since it at least sees connections, I'm okay with that. I just want this computer on the internet already!
So for several days ive been trying to get a wireless adapter to work on my esktop(windows 7 home premium 64bit). After a D-link xtreme N failed to function, I traded it in for a Linksys AE2500.Both devices failed to install correctly because they could not be detected by the install setup. Manually installing drivers would not work, errors would come up.The AE2500 would be detected when plugged in, then fail to install properly, then refuse any manual drivers. In the device manager it would be error 10, unable to start.It finally worked by a chance of luck, when I uninstalled the ports in my USB list.
So basically it will only function if I have the Enhanced USB ports uninstalled or disabled(it also has to be plugged in at the time of uninstall/disable). Doing so will cause it to automatically install its drivers and start working(it will then immediatly nag, that the USB port isnt 2.0 high-speed and claim that its not functioning at full speed). However, as soon as i reboot the machine, or run an update, or scan for hardware, the Enhanced USB ports reinstall themselves and the Wireless Adapter gets booted back to error 10
I just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.
View 3 Replies View Relatedim running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
View 2 Replies View RelatedI have a AR9285 Wireless Network Adapter installed in my Asus Eee PC. Whenever I wake up the computer from hibernate or sleep, the wireless adapter takes a full minute or more before it will actually connect to a network. Once it is awake and connected, I have no issues, and I have no problems connecting to different networks. So it is working as intended most of the time. When starting up the computer from "off," it is usually fine as well, since the amount of time it takes to fully start up the computer is usually about enough time for the adapter to get going (though not always).I cannot ever "quickly" look something up on the computer, as I have to wait a few minutes in order to be connected to the internet. Has anyone had or heard of this problem? I checked and the driver is up to date.
View 1 Replies View RelatedA few months later i wanted to upgrade my 32 bit to 64, since i could only use 3,16 GB ram, and my computer has 8GB. So i bought a win 7 home premium 64 bit and installed it. Now i face the same problem, my computer can not detect any wireless network adapter, though i'm 99% sure that my computer has one.
View 6 Replies View Relatedsince build 7068 I've been facing this problem with this network adapter, will try to explain as good as I can.
Problem as following: Everytime I start the pc after one or two minutes I lost my internet connection and when I try to restart the pc it hangs when shutting pc is showed, forcing me to shut it down only whit the power button.
I have tried to install the vista x64 driver that I have for this network adapter but cannot installed since is onlyfor vista x64, neither in compatibilty mode. After a few research managed to installed it via safe mode. and by now is working good but device manager shows a warning icon and a Cannot start device code 10.
any knows is theres a win 7 update driver?? can I just keep ignoring the code 10 till this bug is fixed??
I just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.
View 4 Replies View RelatedI just upgraded my home network with wireless N.
USB wireless adapter is dlink DWA-130C, driver installed properly and windows 7 32bit detected it correctly as DWA-130C on device manager but it could not find any network in my area.
When I do troubleshoot, windows tell me that driver may not installed properly.
FYI it happened with my older G USB adapter too, when I uninstall the driver to update, it installed normally but then it does not detect any network. I have to do system restore to make it work again.
Any idea?
I cant see available network on my network list. Troubleshooting says "There might be problem with your driver". In device manager, it say"Your driver is working properly"..
View 2 Replies View Relatedim about to pull my hair out i have win7 x 64 and i can't find the driver that will work for a wusb54g ver.4 if i could get a link that would be awsome and not cisco because theirs does not work
View 25 Replies View RelatedCan anyone recommend a reliable USB wireless network adapter for a PC running 32-bit Windows 7 Professional?
I am hoping to find one for a 802.11b/g network where the drivers are not flaky and the unit does not randomly disconnect.
The WUSB600N from Cisco/LinkSys does not seem to fit into this category.
I tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter
- There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
I can't get my Network Adapter to work. I tried installing the drivers included on the CD, but that didn't help much either.
I tried importing them with DriverMax aswell, but that didn't solve the problem either.
How can I get it to work? I'm running 64bit version of 7.
Nevermind, already found the right drivers.
I recently purchased a Belkin wireless network adapter for my HP windows 7 computer, and the checkout woman said it would work.
Unfortunately, it does not work. at first, it was just dodgy, connecting with only a small connection. It started getting better, but it would always cut out after a while.
A friend of mine tried to fix it, using lots of methods including the xlink kai method and others including downloading the drivers and another one which I can't remember. None have worked.
Has anyone got a really easy, fool-proof, easy understandable way to make this work please?
Last night my wireless adapter (Atheros AR5007EG Wireless Network Adapter) stopped working. In the properties it says it is working properly, however,it will not find a single wireless network to connect to, only the big red X over the icon in the system tray. My wife's laptop which is 5 feet from mine, finds our network as well as several of our neighbors. I upgraded to Windows 7 last month, so this morning I tried updating drivers, installed these but still the big red X. My laptop will work with the ethernet cable plugged in, just not wireless.I am stumped because it says it is working properly in the properties menu and not returning any errors during troubleshooting. I know its not my router, as my xbox, ipod touch, android phone, and wife's laptop can connect and work fine. Since she and I have the same laptop, I made sure that our properties settings were the same this morning as well, and they match up.
View 9 Replies View Related"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
View 2 Replies View RelatedMy new Samsung laptop has just stopped allowing me access to the internet. Its not a problem with the router as I have a wired connection to a desktop that is fine. My laptop has been working ok but now I just get 'Limited Access' from the status bar. All the other checks have been made with ISP the Intel(R) Centrino(R) wireless N130 is supposed to be working according to the network properties dialogue box. Also have wired the ethernet from desktop to laptop and still the same response so narrowing it down to the possible driver software.
View 1 Replies View Related