Limited WiFi Connection After 30-60min
Apr 17, 2012
Since I installed Windows 7 on my PC I have this issue. I use a WiFi USB key (D-Link DWL-G132 A3) to connect my computer to internet.
With Windows XP all were working good, but now with Windows 7 after 30/60/xxxx minutes I'm connected i get "limited access - no internet connection". Windows recognized a DNS error, but it was unable to slove it. I'm solving this problem unplugging the WiFi key for 1 minute, and then re-plugging it. Doing this, the connection returns fine for another 30/60/90/xxxx minutes.
(I'm actually trying the connection with IPv6 disabled and using only IPv4)
View 5 Replies
ADVERTISEMENT
Sep 30, 2012
im having trouble with my wifi. The day before it works fine but then the next day i turned on my Vaio laptop and it says Limited Access to my home wifi. I tried connecting to other wifi but same thing. I tried resetting the router, disabling and enabling the wireless connection but all didnt work. I tried connecting it with the cable directly still cannot connect. Finally i did a system restore to the day before where its working fine, it worked. The next day it says Limited Access again! So im guessing 'something' made my wifi error after that 1 day and i dont know what to do
View 3 Replies
View Related
Jul 17, 2012
I have a Dell Inspiron laptop that won't connect wirelessly to my network. ALL other devices in the house (iPhones, iPads, iMac, 1 laptop and another desktop) work fine, no problems. I've tested the laptop at my girlfriend's house using her wifi and still the same problem: Limited Access.
I've ran the troubleshoot, re-booted the router & laptop, checked device manager for any exclamation marks against any drivers (none), tried disabling/enabling the driver, checked for driver updates (none), done a system restore and uninstalled my antivirus software but all to no avail.
Edit: I've tried plugging in the ethernet cable which, although not particularly straight-forward, eventually works.
View 6 Replies
View Related
Apr 19, 2011
I have had a little bit of trouble with my internet connection lately. sometimes i just get limited connection or it will just stop working. what i mean by that is it'll be working fine and then i get a little yellow exclamation mark over my wireless and it says limited access and i can't connect to the internet. i try disabling it and then re-enabling it, troubleshooting, and turning my router on and off again. i think it generally works fine when i restart my computer, but i don't want to have to be restarting all the time and having an unreliable connection. i've got a thomson tg585 v8 wireless router and under my device manager it says i have Atheros AR9285 Wireless network adapter and intel 82579V Gigabit Network connection.
View 2 Replies
View Related
Aug 29, 2011
I'm in need of some serious help here. Working with a Dell Inspiron 1750 laptop that's running windows 7. The machine can not get full access to the Internet. It seems as if there is a software conflict, but I can't find what it is. It did display the BSOD a couple of times, but the screen was gone before I could see what the codes were. The system restore only has 2 days of restore points, neither did anything to help.Running the diagnostics produced the following codes. 0f00:0232, 968634624, 0x490, 0x8007042c, 2000-0151.All repair options suggest patches that require an Internet connection. Well...if the computer had an Internet connection I wouldn't be in such a state. Reminds me of the car repair manual that says to start the engine to preform a test when the problem is the engine won't start.Anyway, I'm at a loss. This isn't even my machine, it belongs to the sister in-law, which means I have no idea of what she may have done, if anything, to cause the problem.There's a lot of Apple software for the ipod, or itouch, whatever it is she uses.I can't access the recent update history, so I'm not sure if updates are a factor.It sure seems like a software issue, but what do I know? If I knew what I was doing...I surely wouldn't be here seeking help.One other thing, when the machine is first booting, a window of some sort appears just after the desktop appears. It only flashes for a split second before disappearing. Not long enough to tell what it is.Well that's all I have, I sure hope that someone has an idea. The computer isn't even 2 years old, so it'd a shame to have to throw it away. As far as programs goes, it has very little, and the 500GB HD isn't even 25% filled.
View 1 Replies
View Related
Dec 25, 2010
I am getting a limited access to my SMC8014WG wireless router from my new netbook with windows 7? is there a router upgrade required?
View 2 Replies
View Related
Apr 13, 2009
Yesterday I updated to v. 2.2 Of Sun Virtualbox and have lost my connection to the Internet on Windows 7. The 'VirtualBox Host - Only Network Status' reports "limited or no connectivity". This is because "the Network did not assign a Network Address to the Computer". I have not been able to solve this problem, the icon in the sys. tray has a yellow marker against it.
I have normal connectivity on Windows XP.
I cannot wind back using System Restore as there are no restore points. I do have a drive image of my C; drive dated just prior to the update, would this work?. Is there an easier way?.
View 4 Replies
View Related
Jan 3, 2012
I have a Linksys WRT120N wireless router connected to a modem, and a desktop connected to the router (not wireless) and i have my laptop who sometimes have this "limited access" problem.It is pretty annoying, happens once a day and i just unplug and replug the wireless router for it to fonction again but i want to fix this problem definitively im not sure what is causing this problem,however when i ran the windows diagnostic thingy,i get 2 problems :"wireless network connection" doesn't have a valid ip configuration and the default gateway is not available.
View 9 Replies
View Related
Mar 1, 2012
I can connect to wifi access here in our house but the problem is there are times that it connection shows LIMITED ACCESS.
View 4 Replies
View Related
Jul 25, 2010
I cannot access my internet and don't know why. When i try to access the internet it says I have 'limited access' although I have a full internet connection. Does anyone know how to fix this please? I have a Windows 7 operating system
View 9 Replies
View Related
Aug 28, 2011
After installing the 'Panda 2011' antivirus, it's impossible to connect to any wireless connection. It always says 'limited access', even though the signal is at full strength.
The antivirus had been fully removed, but the problem persisted, so I even removed any trace left of it in the registry. I even installed the latest NIC driver just to be sure, but it still isn't working.
There are a lot of topics on here with the same 'limited access' problem, but none of them helped.
View 1 Replies
View Related
Jan 19, 2012
I installed a new wireless adapter yesterday in the hope of increasing my internet speed. After installing the driver for the adapter I realised that my internet was no longer working. I can still see the connection but it is limited and doesnt allow me to connect to the internet. I also had a system up date the night before and hadn't been on the internet since that happened so am unsure if this has any part in it.I have tried uninstalling and reinstalling the drivers for both the adapters i have to no avail, as well as plugging my pc into a laptop and using internet connection sharing which also doesnt work.If i run a network repair i end up with two problems found:
1)There might be a problem with the driver for the local area connection adapter
2)There might be a problem with the driver for the wireless network connection adapter They both have yellow signs with exclamation marks next to them.If i type ipconfig/all into the cmd line I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Shouldn't my wireless adapters appear here?
View 4 Replies
View Related
Apr 6, 2011
I'm trying to fix my sisters laptop, which just wont connect to the Internet. I've checked everything I can find. Here's a description of the problem - When looking at the icon in the system tray that shows the connection bars, when I hover over it, it says "not connected - connections are available" . On the related pop-up window It does show my wireless connection. When trying to connect to that wireless network, it eventually says "the connection was unsuccessful - this computer has limited connectivity to "bthomehub.....".
At this point it gives an option to troubleshoot, when I select this it says - "problems found - there might be a problem with the driver for the wireless network connection adapter". If I look at the troubleshooting report from this window it says "windows couldn't automatically bind the IP protocol stack to the network adapter". In 'network and sharing centre' it shows the computer being connected to the homehub, but no connection from homehub to the Internet. Attempted to ping ebay, got this response - "ping request could not find host ebay.com please check then name and try again."
Under wireless connection status it says -
"ipv4 connectivity - no Internet access"
"ipv6 connectivity - no network access"
From looking around on the internet I have tried the following -
- netsh winsock reset catalog
- netsh int ip reset reset.log
- reinstalled drivers for wireless network connection adapter
- checked that windows has no restore points
- tried ipconfig /release at command prompt, got the error "the operation failed as no adapter is in the - - state permissible for this operation"
- tried ipconfig /renew at command prompt, got the error "the operation failed as no adapter is in the - state permissible for this operation"
I tried removing various antivirus/system protection apps...at this point I then got a yellow icon over the connection bars in the system tray, and it now says im 'connected'. but it says 'no internet access'. Its a new laptop running windows 7, it did work fine for a while and then suddenly stopped working while connected to the internet.
View 2 Replies
View Related
Jan 5, 2013
I have found a wireless connection near me and connected to it. I saw that my speed is kind of good (about 14 Mb/s), I tried to get this speed higher.I went into the router setup from my browser, and changed some settings from thereOnce changed, I reboot the router to see if it changed my speed.The one setting that blocked my access to internet is MCS. I don't remember if that was off/disabled, but i changed it to MCS7, the last option available for MCS... thing.
View 4 Replies
View Related
Feb 8, 2012
I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.
Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.
View 9 Replies
View Related
Sep 6, 2011
I'm trying to fix my girlfriend's Windows 7 laptop after she had a virus/malware infection. I'm pretty sure we've successfully cleared the virus (an updated/full scan with Malwarebyte's Anti-Malware in safe mode comes up clean). However, we have had no Internet access since the infection. The wireless router/connection itself is fine (I connect to it daily with my laptop, as I am to write this post) but her laptop won't connect to it, we can't browse any web pages.I may have made the problem worse in trying to resolve it. I stupidly followed the advice on a forum for some registry edits for Windows XP--deleting WinSock and WinSock2 from the registry and then restarting the computer in hopes they'd re-register themselves. Unfortunately, WinSock2 re-appeared but WinSock did not. I'm wondering if this has created a new problem (or compounded the problems we were already having).In diagnostics, we currently get the following report: "Wireless Network Connection doesn't have a valid IP configuration." I just ran an ipconfig in the command prompt and got the following results:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Elizabeth-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 2 Replies
View Related
Nov 10, 2011
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies
View Related
Oct 31, 2011
with a not connecting to the internet situation over wifi. and i told her to use (netsh int reset c:\reset.txt) in the command prompt to reset her IP configuration.well its been about 2hrs since and now her computer is not getting past the Windows Starting screen. Did somthing go wrong with the re configuration?
View 1 Replies
View Related
Mar 25, 2011
I have wifi connection of one service provider and Lan Connection of another service provider... Can i use both connection simultaneously on my laptop? having window 7. They both have automatic configuration of IPs
View 1 Replies
View Related
May 15, 2011
I am trying to set up a workgroup between two Windows 7 Pro computers over a wifi connection. I have set the workgroup name to be identical on both machines (Lastname-Home), but neither machine can see the other. Network discovery and sharing are turned on. From my googleing and forum searching (here and on other forums) all I can find is people saying that if the workgroup names match you should be able to see the PCs.
View 1 Replies
View Related
Jul 21, 2011
I've tried to set up a Wi-Fi connection to use for Nintendo DS/3DS, but nothing seems to work. I don't have a wireless internet connection, so I bought the Nintendo Wi-Fi USB Connector, but that does not work with Windows 7... I've also tried another Wi-Fi USB device, but that doesn't seem to work either. I guess I should get a wireless router that allows Wi-Fi connection, but which would actually work for Nintendo DS/3DS?
View 1 Replies
View Related
Jan 5, 2013
i'm getting annoyed with my sister because she uses too much bandwidth on her laptop than i can get, he uses facebook, twitter, Internet, and utorrent at the same time and i'm only using Internet, visiting forums and playing games. how do i slow down the wifi speed so i can make her internet usage more pain in the ass?
View 5 Replies
View Related
Jan 7, 2013
i have a wifi connection without any protection. now these days i cannot work on it. it tells me that,there is not any access on internet. earlier i could work on it. but the line is always without any protection.
View 7 Replies
View Related
Oct 9, 2011
I cannot connect my laptop to the wifi connection. Its showing like check whether the wifi connection is in range...
View 2 Replies
View Related
Jul 29, 2009
I just upgraded to the beta version of Windows 7 form Vista. I am now (unable) to print off of our local network via wi-fi. I am fairly computer literate, I have tried everything. The internet works fine with my Belkin N+ router...but I cannot print via wi-fi thru my hard lined computer, the one with (Windows 7). Can anyone please help? All 3 of my wi-fi computers have Windows XP on them.
View 2 Replies
View Related
Jan 1, 2012
I connect to my home wifi and it says connected, but there is no internet connection.I noticed that network adapter shows "wireless network connection 2" with that "2" at the end of name. I guess there is a problem. If I rename it to just "wireless network connection" it says it already exists. But cannot see it, and use it! Can anyone tell me how to reset it or somehow switch to "wireless network connection" without "2"?
Also when I type ipconfig/all I get this:
------------------
C:Usersuser>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : user-PC
[code]....
View 9 Replies
View Related
Aug 12, 2012
On my new Lenovo V570, I've been having an issue where it takes anywhere from 30 seconds to 3 minutes to connect to my local network.It will show all the available networks in the list, and either if I wait, or if I try to click my automatic network and click "connect", it still takes a large chunk of time.This happens on all of my saved connections, as well as any public connections I try to access.I believe my wireless is run through Intel My Wi-fi, though for some reason the icon is no longer in my icon tray.
View 2 Replies
View Related
Apr 29, 2011
On these occasions, while watching Hulu on my HTPC, which only connects via WiFi on my Router (Cisco E3000), the movies were interrupted by a loss of connection, indicated by the white tray icon turning orange, and when expanding it's menu, the connection bearing the name of my network had disappeared.On the first failure, the flashing light on the network adapter (Belkin F5D8055) continued flashing as usual, but the steady light was out, until pressing the connection button. The second time around, both light remained lit as normal, but in both instances my network connection on the network adapter's tray icon had disappeared. Using the WiFi's network adapter's connection button, and the router's PBC button didn't solve the problem, nor anything else that I tried.Since the WiFI connection is primarily for internet access, rather than connecting computers, and that shutting off my desktop doesn't usually effect the HTPC's internet connection, it seems obvious that the connection is managed by just the router, adapter and HTPC, so I fail to understand the relationship between the vanishing network and the loss of internet connection.When these failures occurred, they only lasted for ~ 10-15 minutes, and then were restored on their own, with no more apparent reason than the outage had. So far, this is only an annoyance, but I fear that it is an omen of greater problems on the horizon, and I have no idea of how to isolate the origin of the problem..
View 9 Replies
View Related
Jun 6, 2011
I connect with a broadband dongle. Sometimes it's disconnecting me after a couple of minutes - other times I'm OK for a couple of hours. No problem getting back on-line - only takes a minute, but it's damned annoying.I contacted the ISP (Indian call centre) and they were of no help. Said they could see the frequent disconnections but that there was no breaks in their service.
View 2 Replies
View Related
Aug 21, 2011
I just got a new laptop with Windows 7. Initial set-up went fine but I cannot connect to router. I have a MAC using the wi-fi and I can also connect an iPhone, a Linux, and another Acer laptop using Windows 7...but the new laptop is not working. My connection is showing on the menu but once I enter the security key, I get a message saying it cannot connect.I restarted the router, went over the whole router set-up again, connected the Ethernet cable to the laptop while trying to set-up the wi-fi, but after numerous trials, nothing worked.
View 2 Replies
View Related
Oct 9, 2011
I am using HCL ME 74 series laptop with win 7 OS 32 bit. recently my OS crashed and I reinstalled the OS. surprisingly there are no netwrok controllers in my device anager. the network adpters give by HCL have been used. But the system is detecting the wifi networks all around but not connecting. The HCL ME series gives some funny buttons to press: set wifi enable -> Fn+F11, and bluetooth -> fn+F12 . both are enables.
View 4 Replies
View Related
